Eiki Projector Lc X80 User Manual

51

Lamp control
Filter control
Choose the running speed of cooling fans from the following 
options.
 Normal  .......  Normal speed.
  Max  ...........  Faster than the normal speed.
Fan control
Remote controlRemote control
When pressing the SELECT button at Remote control, the Remote control code menu appears.
RC sensor
Select a location of the infrared remote receiver of the remote 
control. See “Remote Control Operating Range” on page 15 for 
details.
  Both  .........  Activate both the front and...

5

On start
When this function is set to “On,” the projector will be 
automatically turned on just by connecting the AC power cord to 
the wall outlet.
✔Note:
	 •	 Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	the	
Projector”	on	page	24).	If	the	projector	is	turned	off	in	the	incorrect	
sequence,	the	On	start	function	does	not	work	properly.
Power management
Time left before the lamp is off
Press the SELECT button at Power management and the dialog box appears.  Use the Point 7 8...

5

Security
Key lock
Key lock
Security
Select Key lock and this box appears. Choose one of the alternatives with the Point ed buttons and select [Yes] to activate it.
This function locks the side control and remote control buttons to 
prevent operation by unauthorized persons.
. . . . . Unlocked.
. . . . .  Lock the side control buttons.
  To unlock, use the remote control.
. . . . . Lock the remote control buttons.  
To unlock, use the side control.
If the side control accidentally becomes locked...

54

Change the PIN Code 
Change the PIN code
CAUTION:
WHEN y OU HAVE CHANGED THE PIN CODE,  WRITE DOWN 
A NEW PIN CODE IN COLUMN OF  THE PIN CODE NO . MEMO 
ON PAGE 76,  AND KEEP IT SECUREL y . IF y OU FORGET y OUR 
PIN CODE,  THE PROJECTOR CAN NO LONGER BE STARTED .
The PIN code can be changed to your desired four-digit number. 
Press the Point d buttons to select “PIN code change” and press 
the SELECT button. The New PIN code input dialog box appears. 
Set a new PIN code.
Lamp counter
This function...

55

Factory default
This function returns all setting values except for the user logo, PIN 
code lock, Logo PIN code lock, lamp counter, and filter counter to 
the factory default settings.
Factory default
Quit
Exit the Setting Menu.
Select Factory default and this box appears. Select [Yes], and the next box appears. 
Test pattern
Various test pattern are available for use when setting up the 
projector.
Filter counterFilter counter
Filter replacement icon appears on the screen at a set time.
✔Note:	 •...

56

Filter Instructions
Filter prevents dust from accumulating on the optical elements inside the projector\
. Should the filter becomes 
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup 
and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to 
replace the filter easily. The projector monitors the condition of the filter at all time and replac\
es a filter with a 
new one...

57

Turn off the projector, and unplug the AC power cord 
from the AC outlet.
First, clean up the dust on the projector and around the 
air vents.
1
2
Press s on the filter cover to release the latch and open 
the filter cover.3
Put the new one back into the position and close 
the filter cover. Make sure that the filter cartridge is 
properly and fully inserted.
5
CAUTION
Make sure the filter cartridge is inserted in the 
projector. If the filter cartridge is not inserted, the 
projector cannot be...

58

Be sure to reset the Scroll counter after replacing the filter 
cartridge. 
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
Setting Menu icon.
Use the Point ed buttons to move the red frame pointer to 
Filter counter and then press the SELECT button. A dialog 
box appears showing the Used time option and the Scrolls 
remaining option. Use the Point ed buttons to select  
Scroll(s) remaining.
1
2
Resetting the Scroll CounterScroll...

59

Turn off the projector and unplug the AC power cord. Let 
the projector cool for at least 45 minutes.1
Open the filter cover. (p.57)2
Follow these steps to replace the lamp.
✔Note:
	 •	 Be	sure	to	insert	the	lamp	in	the	correct	direction.
	 •	 Do	not	reset	the	Lamp	counter	when	the	projection	lamp	is	not	replaced.
Lamp Replacement
For continued safety, replace with a lamp  of the 
same type. Do not drop the lamp or touch the 
glass bulb! The glass can shatter and may cause 
injury.
Allow a projector...

60

ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the 
dealer.
 ●  Model No . of your projector  :  LC-X80
 ●  Replacement Lamp Type No  . :  POA-LMP108
               (Service Parts No. 610 334 2788)
Resetting the Lamp Counter
Be  sure  to  reset  the  Lamp  counter  after  the  lamp  is  replaced.  When  the  Lamp  counter  is  reset,  the  LAMP 
REPLACE indicator stops lighting and the Lamp replacement icon disappears....