Eiki Projector Lc W4 User Manual
Have a look at the manual Eiki Projector Lc W4 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 APPENDIX System (1)SVGA 1SVGA 2SVGA 3 Auto PC Adj.Fine sync.Total dotsHorizontalVerticalCurrent modeClampDisplay area Display area - HDisplay area - VFull screenResetMode freeStore Quit StandardRealImage 1Image 2Image 3Image 4 Image AdjustContrastBrightnessColor Temp RedGreenBlue Gamma Store Quit FullZoomTrueDigital zoom +Digital zoom – 0 - 31 On/Off 0 - 630 - 63 InputDigital Analog Go to System(1) Input 2Y, Pb/Cb, Pr/Cr Computer Input Input 3 Go to System(2) Go to System(2) Input 1 Video S-Video PC Adjust 640 x 480720 x 400800 x 6001024 x 7681152 x 8641280 x 10241366 x 768 Mode 1Mode 2Mode 3Mode 4Mode 5 Image Select High 0 - 630 - 630 - 63 0 - 15 Image 1Image 2Image 3Image 4 Screen 1400 x 1050 Quit Yes/No Quit Mid ResetYes/No RGB Low XLow Sharpness0 - 15 N/A Go to System(2) Computer Input/Video Input ✽N/A - - -not applicable MENU TREE Go to System(1) Go to System(3) Y, C MODE 1 MODE 2 Quit Noise reductionOff/On ProgressiveOff/On
52 APPENDIX AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N Video Input Auto 1080i501035i720p575p480p575i480i StandardCinemaImage 1Image 2Image 3Image 4 Quit FullZoom 0 - 630 - 630 - 630 - 63 Off/On VolumeTreble0 - 63 Language Image Select System (3) System (2) Image AdjustContrastBrightnessColorTint RedGreenBlueSharpness ResetStore Gamma Progressive 0 - 630 - 630 - 630 - 150 - 15 Image 1Image 2Image 3Image 4 Screen Sound SettingEnglishGermanFrenchItalianSpanishPortugueseDutchSwedish ChineseKoreanJapanese On/Off On/Off On/Off On/OffOn/Off Off On/Off 1 Lamp/2 Lamp Code 1 Yes / No Keystone Blue back Display Logo CeilingRear Power management On start Lamp mode Remote control Factory default Yes/No Quit Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Quit 0 - 63 Russian HighColor TempMidLow XLow ReadyShut down Yes / NoLamp counter reset OffKey lockProjectorRemote Control 1-30 MinQuit Quit Computer Input/Video Input Computer Input/Video Input Mouse/ProjectorUSB 1080i60 Off/OnNoise reduction NormalNatural wide Built-in SP.On/Off Quit Bass0 - 63 MuteOn/Off
53 Owner’s Manual (Print and CD-ROM) AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries Remote Control Cable DVI-VGA Cable and DVI Cable 3 Types Control Cable (For PS/2, Serial and ADB port) 3 Types Light-Block Sheet (For option lens) 2 Types Lens Attachment (For option lens) Protective Dust Cover Real Color ManagerAccessories TECHNICAL SPECIFICATIONS 1.21 TFT Active Matrix type, 3 panels Multi-media Projector 46.3 lbs (21 kg) 17.3 x 9.1 x 23.8 (439 mm x 230 mm x 605.6 mm) 1366 x 768 dots 3,147,264 (1366 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N Up and Down 800 TV lines INT. SP. Stereo (R and L), 3 watt RMS (T.H.D. 10%) 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C) 14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C) Projector Type Net Weight Dimensions (W x H x D) Panel Resolution Number of Pixels Color System Scanning Frequency Horizontal Resolution Built-in Speakers Operating Temperature Storage Temperature LCD Panel System 250 watt type x 2Projection Lamp 0˚ to 6.9˚Feet Adjustment Power Source : AA or R06 Type x 2 Operating Range : 16.4’ (5m) / ±30˚ Dimensions : 2.0” x 1.4” x 7.6” (50mm x 36mm x 193mm) Net Weight : 0.35 lbs (160 g) (including batteries) Laser Pointer : Class IILaser (Max. Output : 1mW / Wave length : 650±20nm) Remote Control Transmitter 480i, 480p, 575i, 575p, 720p, 1035i, 1080i-50 and 1080i-60High Definition TV Signal AC 100 ~ 120 V (8.0 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada) AC 200 ~ 240 V (4.0 A Max. Ampere), 50 / 60 Hz (Continental Europe) Voltage and Power Consumption H-sync. 15 ~ 120 KHz, V-sync. 50 ~ 120 Hz Motorized Lens Shift DVI-I Terminal (Digital/Analog), RCA Type (Audio R and L) and DIN 8-pin (Control port)Input 1 Jacks BNC Type x 5 (R/Pr, G/Y, B/Pb, H/HV and V), RCA Type (Audio R and L) and DIN 8-pin (Control port)Input 2 Jacks BNC Type x 2 (VIDEO/Y, C), RCA Type (Audio R and L) and DIN 4-pin (S-Video)Input 3 Jacks Serial port in (DB 9), Serial port out (DB 9), USB port, Audio Monitor out (RCA Type R and L) and Wired Remote Jack Other Jacks ●Specifications are subject to change without notice. ●LCD panels are manufactured to the highest possible standards. At least 99.99% of the pixels are effective, however a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels. APPENDIX
54 APPENDIX Vcc - Data + Data Ground 1 2 3 4 USB PORT TERMINAL Pin Configuration Connect USB port output terminal of computer or peripheral equipment to this terminal with USB port Cable (not supplied). 2 341 CONFIGURATIONS OF TERMINALS Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with Control Cable (supplied). 12 345876 Pin Configuration ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2SerialADB 1 2 3 4 5 6 7 8 ----- RxD TxD ----- Ground ----- ----- ----- 1 2 3 4 5 6 7 8 9----- 1 2 3 4 5 6 7 8 9 Connect serial port output terminal of computer to this terminal with Serial Cable (not supplied). Pin Configuration SERIAL PORT IN/OUT TERMINAL DVI-I TERMINAL (DIGITAL/ANALOG) This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this terminal with DVI cable (supplied). 1917 21018 31119 41220 51321 61422 71523 81624 C1 C2 C3 C5C4 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data Analog Vert. sync 1 5 2 4 3 6 7 8 Pin Configuration T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 Analog Red Input Analog Ground (R/G/B) Analog Green Input Analog Horiz. sync Analog Blue Input C1 C5 C2 C4 C3 CONTROL PORT CONNECTOR
©2006 Eiki International, Inc. U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Canada Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] Eastern Europe EIKI CZECH spol. s.r.o. Umelecká 15 170 00 Praha 7 Czech Republic Tel : +42 02 20570024 +42 02 20571413 Fax : +42 02 20571411 E-Mail : [email protected] Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 E-Mail : [email protected] WorldWide Website http://www.eiki.com ˆ EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Part No. 610 329 6937 (1AA6P1P5181-- M4RBF) Printed in Japan A-key to better communications
- 1 - E LCD PROJECTOR LENS REPLACEMENT AND INSTALLATION PROCEDURES CAUTION When installing or replacing the Projection Lens, refer to this manual. For installation of the lens, use the parts designated in the manual. Do not use the installation manual and Light-Block Sheets in the lens package. Check the following parts supplied to this projector. NOTES ON LENS INSTALLATION ●Lens installation and replacement should be made by the qualified service personnel. ●Be sure to install the lens following this procedure precisely. ●Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents. ●Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector. ●When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface. And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or mechanical parts. ●For details of the lens and installation, contact the sales dealer where you purchased the projector. ●LIGHT-BLOCK SHEETS 3 pcs. ●LENS ATTACHMENT (01) 1 pce. ●LENS ATTACHMENT (02) 1 pce. This projector applies the Projection Lenses listed below. Use the suitable lens for where the projector is used. AVAILABLE LENS Model NO. LNS-W01 LNS-W01Z LNS-T01 LNS-T01Z LNS-T02 LNS-W02 LNS-W02Z LNS-M01 LNS-M01Z LNS-S01 LNS-S02 LNS-S02Z Type Fixed Short Throw Lens Fixed Long Throw Lens Long Throw Zoom Lens Short Throw Zoom Lens I Semi-Long Throw Zoom Lens Standard Zoom Lens II Standard Zoom Lens I Zoom Motor Driven FixedManual Focus Fixed Motor Driven Motor Driven Motor Driven Motor Driven Manual Motor Driven Motor Driven Motor Driven Motor Driven Motor Driven LNS-W03 LNS-S03 Short Throw Lens II Standard Zoom Lens III FixedManual Motor DrivenMotor Driven ●LIGHT-BLOCK SHEET MOUNTING BASE 1 pce. ●LIGHT-BLOCK SHEET MOUNTING SCREWS 2 pcs. LNS-W04Wide Zoom LensMotor DrivenMotor Driven LNS-W05Wide Zoom LensMotor DrivenMotor Driven LNS-W06Wide Zoom LensMotor DrivenMotor Driven LNS-W07Fixed Short Throw LensFixedManual LNS-T03Long Throw Zoom LensManualManual
- 2 - E NOTE: The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following the procedure below. 1 Remove the Lower Lens Cover. Remove the two (2) Screws A. Push the part Band pull the Lower Lens Cover down. (See Fig. 1.) 2 Remove the four (4) Screws C. Pull the Upper Lens Cover toward the front and remove. (See Fig. 2.) 3 Remove the two (2) Screws Dand the Cover Plate on the back of the Upper Lens Cover. (See Fig. 3.) LENS REPLACEMENT AND INSTALLATION PROCEDURE A C C B Fig-3 Fig-1 Fig-2 UPPER LENS COVER COVER PLATE UPPER LENS COVER LOWER LENS COVER D
- 3 - E LENS LOCK RELEASE LENS LOCK SCREW DRIVER IN THE LENS LOCATE MOTOR ON RIGHT SIDELENS ATTACHMENT Part No. (610 275 6029) Fig-4 Fig-6Fig-7 LENS LOCK LEVER LENS LOCK 4 Replace the Lens Cap on the rear (mounting side) of the Projection Lens and mount a lens on the Lens Attachment with four (4) Screws. (Use the screws attached on the lens.) Connect the Lens Motor Lead connector to the socket on the right-top of the Lens Attachment (Motor Driven Lens only). See Fig. 5. When installing the LNS-W01, LNS-W01Z, LNS-T01, LNS-T01Z, be sure to mount the lens and the Light-Block Sheet Mounting Base on the Lens Mounting Bracket. (See Fig. 8) LIGHT-BLOCK SHEET MOUNTING BASE Part No. (610 303 9596) Kit parts with two (2) screws. 5 Grasp (release lock) the Lens Lock Lever and turn it fully upward. (See Fig. 6.) Install the lens into the projector. Grasp the Lens Lock Lever and turn the Lever fully downward until lever is Locked (clicked position) properly. (See Fig. 7.) When installing the Motor Driven Lens, be sure to mount the Lens Motor on the right side. (See Fig. 5.) After installing the lens, make sure the lens is not loose and properly installed. CONNECTOR LENS MOTOR LEAD Fig-5 LENS ATTACHMENT SOCKET Lens attachments For each lens. LNS-W01, LNS-W01Z, LNS-W02Z, LNS-W03, LNS-T01, LNS-T01Z, LNS-T02, LNS-S02, LNS-S02Z, LNS-S03, LNS-M01Z, LNS-W04, LNS-W05, LNS-W06, LNS-W07Lens Attachment 01 POA-LNA-01 (610 303 8742) LNS-W02, LNS-M01, LNS-S01Lens Attachment 02 POA-LNA-02 (610 304 6228) Lens Model No.LENS ATTACHMENT TYPE No. (PART No.) Grasp (unlock) the Lens Lock Lever and pull upward.Grasp (unlock) the Lens Lock Lever and fully pull downward until it is locked (clicked).
- 4 - E 6 This projector has three Light-Block Sheets. Use the Light-Block Sheet corresponding with the lens. (Refer to the list below.) Set the Light-Block Sheet through the lens. Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8. NOTE: ●Be sure to set each Light-Block Sheet as shown in Fig. 8. ●Make sure the mark (TOP and BACK) on the Light-Block Sheets are correct and set them properly. Light-Block Sheets for each lens. Lens Model No. LNS-S02, LNS-S02Z, LNS-W04 LNS-M01, LNS-T02, LNS-W02, LNS-M01Z, LNS-W02Z, LNS-S01, LNS-W03, LNS-W07 LNS-W01, LNS-T01, LNS-W01Z, LNS-T01Z, LNS-S03, LNS-W06, LNS-W05 Type No. (Part No.) TYPE FD1 (610 322 8051) TYPE FE1 (610 322 7269) TYPE FF1 (610 322 7788) Not include Light-Block Sheet Mounting Base and screws. Fig-8 For Models LNS-W01, LNS-W01Z, LNS-T01, LNS-T01Z LIGHT BLOCK SHEET Make sure the sheet figure is correct and put in proper position.LIGHT BLOCK SHEET Make sure the sheet figure is correct and put in proper position. Mount the Light-Block Sheet with two (2) screws.