Eiki Projector Lc W3 User Manual

31
When video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.Y,Pb/Cb,Pr/Cr
SELECTING INPUT SOURCE
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon.1
Move a pointer (red arrow)
to source and press
SELECT button.
Source Select Menu (VIDEO)
Move a pointer to source that you want to select and then press
SELECT button.3
When video input signal is connected to VIDEO jack,
select Video.Video
When video...

32
VIDEO INPUT
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
SELECTING VIDEO SYSTEM
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to AV
SYSTEM Menu icon.
Press POINT UP/DOWN buttons to move a red arrow pointer to
system that you want to select and then press SELECT button.
1
2
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43,...

33
VIDEO INPUT
PICTURE IMAGE SELECT
IMAGE LEVEL SELECT (MENU)
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
IMAGE SELECT Menu icon.1
2Press POINT UP/DOWN buttons to move a red frame pointer to
level that you want to set and then press SELECT button.
IMAGE SELECT MENU
Normal picture level preset on this projector.
Standard
Picture level adjusted for picture with fine tone.
Cinema
User preset picture adjustment in IMAGE ADJUST Menu (P37)....

34
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display desirable image size.
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SCREEN Menu icon.
Press POINT DOWN button and move a red frame pointer to
function that you want to select and then press SELECT button.
1
2
NOTE : SCREEN Menu can not be operated when
“720p”, “1035i” or “1080i” is selected on AV
SYSTEM Menu (P32).
Move a red...

35
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
IMAGE ADJUST Menu icon.1
2Press POINT UP/DOWN buttons to move a red frame pointer to
item that you want to adjust and then press SELECT button.
Level of each item is displayed.  Adjust each level by pressing
POINT LEFT/RIGHT buttons.IMAGE ADJUST MENU
Press POINT LEFT button to decrease contrast, and POINT RIGHT
button to increase contrast.  (From 0 to 63.)
Press POINT LEFT button to adjust...

36
PICTURE IMAGE
Auto picture control
Press either POINT LEFT button or POINT RIGHT button to Auto
picture control position that you want to select . (Off, L1 or L2)
Off ······· Auto picture control OFF position.
L1 ········ Auto picture control LEVEL 1 position.
L2 ········ Auto picture control LEVEL 2 position.
Move a red frame pointer to MENU, and then press the
SELECT button. The COLOR MANAGEMENT menu will be
exited and the display will return to the IMAGE ADJUST menu.
(At this time, the image will...

37
Reset all adjustment to previous figure.
Reset
Store
Closes IMAGE ADJUST MENU.
Quit
Other icons operates as follows.
To store manually preset image, move a red frame pointer to Store
icon and press SELECT button.  Image Level Menu will appear.
Move a red frame pointer to Image 1 to 10 where you want to set and
then press SELECT button.
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast.  (From 0 to 15.)
Gamma
Press POINT LEFT button to soften the image, and POINT...

38
Keystone
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons to move a red frame
pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Set a red frame
pointer to the item
and press the
SELECT button.Press the POINT DOWN button to move a red frame pointer
to the item that you want to set and then press the...

39
SETTING
Logo
Logo settings can be altered as follows:
Logo select
This function decides what to be displayed on the starting-up dis-
play as follows:
Off  . . . . . . .count-down only  
Default  . . . .the factory-set logo
User  . . . . . .the image you captured 
Capture
This function enables you to capture the image being projected
and use it for a starting-up display.  
After capturing the projected image, go to the Logo function and
set it to “User”.  Then the captured image can be displayed when...

40
SETTING
Ceiling 
Rear  Ceiling
When this function is “On,” the picture is top/bottom and left/right
reversed.  This function is used to project the image from a ceiling
mounting the  projector.
Rear
When this function is “On,” the picture is left/right reversed.  This
function is used to project the image to a rear projection screen.
Lamp control
This function allows you to change brightness of the screen.
····brightness according with the input signal.
····normal brightness.
····lower brightness...