Eiki Projector Lc Sx6 User Manual

41
Move the yellow
frame pointer to the
Auto PC adj.  and
press the SELECT
button.
PC Adjust Menu
PC ADJ. icon
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector.  Once parameters are memorized, the
setting can be done just by selecting Mode in the System menu
(p39).  See Store on page 43.
✔Note:
• Fine sync, Total dots and Picture Position of some computers can not be fully
adjusted with this Auto PC Adjustment function.  When the image is not...

42
Computer Adjustment
Press the MENU button to display On-Screen Menu.  Spin
the menu icons with the Control pad and press the SELECT
button when the PC ADJ. icon comes right in front.1
2
Move the yellow
frame pointer to an
item and press the
SELECT button.
PC Adjust Menu
Adjust value with
the Control pad.
Some computers employ special signal formats which may not be
tuned by Multi-scan system of this projector.  Manual PC
Adjustment enables you to precisely adjust several parameters to
match those...

43
Computer Adjustment
Adjust this item when the projected image is affected by the
noise from the external equipment.  (From 0 to 15)  V-sync phase
Reset
Mode
Exits the PC Adjust Menu.
Quit
Resets all adjustments to their previous levels.
Vacant Mode
shows the selected input,
source and system, and  values
of “Fine sync,” “Total dots,”
“Clamp,” “Display area,” and
“Position.”
To store adjustment data
To clear adjustment data
Press the SELECT button
at the Display area and the
Display area dialog box...

44
Image Menu (PC)
Move the  yellow
frame pointer to
an image level
you want to select
and then press
the SELECT
button.
1
Normal picture level preset on this projector for AV mode.Standard 
Picture level with improved halftone for graphics.Real
Normal picture level preset on this projector for PC mode.Standard 
Picture level adjusted for picture with fine tone.Cinema
User preset picture adjustment in IMAGE ADJ. menu (p45~ 47).IMAGE 1~10
2
selects image level from Standard, Cinema, Real, and Image 1~10....

45
Image Adjustment
1
2
Decrease or increase contrast with the Control pad.  
(From 0 to 63.)
Adjust image darker or brighter with the Control pad.  
(From 0 to 63.) Contrast
Brightness
Lighten or deeper color with the Control pad. 
(From 0 to 63.)
Adjust with the Control pad to obtain proper color.  
(From 0 to 63.)Color
Tint
Image Adjust 
Image Adjust Menu
Color management
The Color management function enables you to adjust color level,
phase and gamma of the selected spot of the projected image and...

46
Image Adjustment
Move the pointer to one of the followings with the Control pad
and press the SELECT button.
LIST............displays Color Management List window to store
the adjustment data.
COLOR.M..returns to the previous image with the Color
management pointer.
MENU.........displays a confirmation dialog box.  Select Yes to
return to the menu display.
Color management list
After selecting LIST on the Color selection window, Color
Management List will appear.  Move the pointer to one of the...

47
Image Adjustment
Reset all adjustments to their previous figures.
Reset
Store
Exits Image Adjust menu.
Quit
To store the adjustment data, move an yellow frame pointer to
Store and press the SELECT button. Image Level Menu will
appear.  Move the yellow frame pointer to one of Image 1~10 and
then press the SELECT button. 
With this function On, interlaced video signal is displayed in a
progressive picture.Progressive 
This function is effective on 2:3 or 2:2 pulldown video sources.
With this function...

48
Provides image to fit the horizontal size of the screen size.
When the input signal is SXGA (5:4), the image is fully displayed
at 4:3 aspect ratio.Full screen
Adjusts aspect (scale and position) of the screen.  Press the
SELECT button at Custom.  Custom will be displayed on the
top left of the screen for 4 seconds and then return to the
previous menu display.  Press the SELECT button again with
the pointer staying on Custom to display Aspect setting menu.
Adjust each value of Scale and Position....

49
Screen Setting
Press the SELECT button at the D. Zoom –.  The message “D.
Zoom –” is displayed.  Press the SELECT button to compress
the image size.  D. Zoom –
Ceiling 
Rear 
When this function is “On,” the picture is top/bottom and left/right
reversed.  This function is used to project the image from a ceiling
mounting the  projector.
When this function is “On,” the picture is left/right reversed.  This
function is used to project the image to a rear projection screen.
Press the SELECT button at the...

50
Exits Sound menu. Quit
1
Adjust Volume with the Control pad. 
Select On to cut off sound, and select Off to restore sound.
Volume
MuteSound Menu
Treble
Adjust Treble sound with the Control pad.
Bass
Adjust Bass sound with the Control pad.
Soundadjusts Volume, Treble, Bass, or mutes sound.  
Press the MENU button to display On-Screen Menu.  Spin
the menu icons with the Control pad and press the SELECT
button when the SOUND icon comes right in front.
2Move the yellow frame pointer with the Control pad...