Eiki Projector EK-811W User Manual
Have a look at the manual Eiki Projector EK-811W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
— 26 — DLP Projector — Owner’s Manual Main Menu Sub Menu / Settings Default SETUPCommunications WLAN Enable by set Start IP by set End IP by set Subnet Mask by set Default Gateway by set MAC Address by set SSID by set Network Projector Name by set Restart Network Network Factory Reset Serial Port Baud Rate 9600 19200 14400 19200 38400 57600 115200 Serial Port Path RS232 RS232 HDBaseT Projector Address 0 - 9 0 OPTION Auto Source Off On On High Altitude Off Off On Test Pattern Off Off Grid Red Green Blue Yellow Magenta Cyan White Black Background Color Logo Logo Blue Black White Hot-Key settings Blank Screen Blank Screen Aspect Ratio Freeze Screen Overscan Power Settings Standby Power Mode 0.5W mode Communication mode Communication mode
— 27 — DLP Projector — Owner’s Manual Main Menu Sub Menu / Settings Default OPTIONPower Settings Direct Power On Off Off On Auto Power Off No No 5 Mins 10 Mins 15 Mins 20 Mins 25 Mins 30 Mins Sleep Timer No No 2 Hours 4 Hours 6 Hours Light Source Settings Light Source Mode Constant Power Constant Power Constant Luminance Eco Mode Constant Power Settings 0 - 10 10 Constant Luminance Settings 0 - 10 Total Projector Hours Light Sensor Light Sensor Calibration Calibrated? (Display Yes/No) Information Model Name Serial Number Native Resolution Firmware Main Source - Resolution - Signal Format - Pixel Clock - Horz Refresh - Vert Refresh Sub Source - Resolution - Signal Format - Pixel Clock - Horz Refresh - Vert Refresh Light Source Mode Total Projector Hours Standby Power Mode IP Address DHCP Factory Reset Yes/No (Dialog box) Service
— 28 — DLP Projector — Owner’s Manual Picture Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. Display Mode Brightness Contrast Sharpness Color Tint Phase Frequency Horz Position Vert PositionPICTURE OUTPUT SETUP OPTIONPICTURE Presentation 50 502 50 50 50 50 50 50 Item Description Display Mode Optimize the projector for displaying images under certain conditions, s\ uch as Presentation, Video, Bright, Blending, 2D High Speed, 3D, and user-definable preset. Brightness Adjust the intensity of the image. Contrast Adjust the degree of difference between the lightest and darkest parts of the picture and change the amount of black and white in the image. Sharpness Select the edge clarity of the image. Color Adjust a video image from black and white to fully saturated color. The color setting applies to video sources only. Tint Adjust the red-green color balance in the image of video images. The tint setting applies to video sources only. Phase Analog signals only. Adjust pixel phase when the image still shows shimmer or noise after pixel tracking is optimized. Pixel phase can adjust the p\ hase of the pixel-sampling clock relative to the incoming signal. Frequency Analog signals only. Steady flickering or several soft vertical stripes or bands across the entire image indicates poor frequency. Proper frequency ensures that the image quality is consistent across the screen, the aspe\ ct ratio is maintained, and that the pixel phase can be optimized. Horz Position Move the image right or left within the area of available pixels. Vert Position Move the image up or down within the area of available pixels. 3D Display Configure the 3D display settings. See “3D Display Menu” on page 29. HSG Adjustment Configure the color management settings. See “HSG Adjustment Menu” on page 30. Advanced Configure the advanced image settings. See “Advanced Menu” on page 31.
— 29 — DLP Projector — Owner’s Manual 3D Display Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select 3D Display and press the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. 3D Enable 3D InvertPICTURE OUTPUT SETUP OPTION3D Display Off Item Description 3D Enable Enable/Disable display of 3D image. 3D Invert Invert 3D sync signal for the application of using single projector.
— 30 — DLP Projector — Owner’s Manual HSG Adjustment Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select HSG Adjustment and press the Enter button to enter the HSG Adjustment menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. HSG Enable Auto Test Pattern Red H. Red S. Red G. Green H. Green S. Green G. Blue H. Blue S.PICTURE OUTPUT SETUP OPTIONHSG Adjustment On On 254 0 0 254 0 0 254 0 Item Description HSG Enable Enable/Disable the HSG adjustment function. Auto Test Pattern Set to “On” to enable displaying a test pattern for the target color or set to “Off” to disable the auto test pattern. Red H. / Green H. / Blue H. / Cyan H. / Magenta H. / Yellow H. Adjust the hue of the red, green, blue, cyan, magenta, or yellow channel\ of the image. Red S./ Green S./ Blue S./ Cyan S./ Magenta S./ Yellow S. Adjust the saturation of the red, green, blue, cyan, magenta, or yellow \ channel of the image. Red G. / Green G. / Blue G. / Cyan G. / Magenta G. / Yellow G. Adjust the gain of the red, green, blue, cyan, magenta, or yellow channe\ l of the image. White R Gain / White G Gain / White B Gain Adjust the white balance of the red, green, or blue channel of the image\ . Reset to Default Reset the hue, saturation, gain, and white balance adjustments to the factory defaults.
— 31 — DLP Projector — Owner’s Manual Advanced Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select PICTURE and press the Enter button to enter the PICTURE menu. Press the arrow keys (pq) to select Advanced and press the Enter button to enter the Advanced menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. White Peaking Gamma Color Temperature Color Space Color Settings Color Enhancement Film Mode Extreme BlackPICTURE OUTPUT SETUP OPTIONAdvanced 100 Bright Bright RGB 0 Off On Item Description White Peaking (Video source only) Increase the brightness of whites that are near 100%.\ Gamma Select the appropriate gamma from Video, Film, Bright, and CRT. Color Temperature Change the intensity of the colors. Select a listed relative warmth valu\ e. Color Space Select a color space that has been specifically tuned for the input signal. Use only for analog signals and certain digital sources. Color Settings Adjust the gain of the red, green, or blue channel of the image. It will\ affect the black and white. Adjust the offset of the red, green, or blue channel of the image. It will affect the black and white. Reset RGB gain/offset to return the factory default settings for color adjustments. Color Enhancement The Color Enhancement control can improve the picture quality of picture\ s with a high saturation of color. Film Mode Control film mode detection and determine whether the original source of the input video was film or video. Extreme Black Analyze the current input image and calculate an offset value which is then added to the analog to digital converter black level value. This ensures optimum black level for each analog source.
— 32 — DLP Projector — Owner’s Manual Output Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. Aspect Ratio Overscan H Digital Zoom V Digital Zoom H Digital Shift V Digital Shift Image Warping PIP/PBPPICTURE OUTPUT SETUP OPTIONOUTPUT Auto Off 100 100 50 50 Item Description Aspect Ratio Display an image with the detected size, or resize the image by maximizi\ ng either the height, width or both, or resize to the maximum size possible\ while keeping the original aspect ratio. Overscan Remove noise around the image. H Digital Zoom Change the size of projector’s display area horizontally. If the display area has been resized by this setting, it can be moved by changing the H Digi\ tal Shift and V Digital Shift settings. V Digital Zoom Change the size of projector’s display area vertically. If the display area has been resized by this setting, it can be moved by changing the H Digital \ Shift and V Digital Shift settings. H Digital Shift Move the display area horizontally if its size has been changed by the Digital Zoom setting. V Digital Shift Move the display area vertically if its size has been changed by the Dig\ ital Zoom setting. Image Warping Configure the image warping settings. See “Image Warping Menu” on page 33. PIP/PBP Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 34.
— 33 — DLP Projector — Owner’s Manual Image Warping Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select Image Warping and press the Enter button to enter the Image Warping menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. H Keystone V Keystone H Pincushion V PincushionPICTURE OUTPUT SETUP OPTIONImage Warping 20 20 50 50 Item Description H Keystone Adjust the keystone horizontally and make a squarer image. Horizontal keystone is used to correct a keystoned image shape in which \ the left and right borders of the image are unequal in length. This is intended for use with horizontally on-axis applications. V KeystoneAdjust the keystone vertically and make a squarer image. Vertical keystone is used to correct a keystoned image shape in which the\ top and bottom are slanted to one of the sides. This is intended when for use with vertically on-axis applications. H PincushionAdjust the pincushion horizontally and make a more square image. V PincushionAdjust the pincushion vertically and make a more square image.
— 34 — DLP Projector — Owner’s Manual PIP/PBP Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select PIP/PBP and press the Enter button to enter the PIP/PBP menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. PIP/PBP Enable Main Source Sub Source Swap Size LayoutPICTURE OUTPUT SETUP OPTIONPIP/PBP On VGA DVI-D Large PBP, Main Left Item Description PIP/PBP Enable Toggle between displaying two sources at once (Main and PIP/PBP images) or one source only. Main Source From the list of active inputs, select one to be used as the main image.\ Sub Source From the list of active inputs, select one to be used as the PIP/PBP . Swap Change the main image to PIP/PBP, and the PIP/PBP to main image. Swapping is available only when PIP/PBP is enabled. Size Select the PIP/PBP size. Available options: Small, Medium, or Large. Layout Set the location of the PIP/PBP image on the screen. PIP/PBP layout and size table as described below. ¾ P : indicates primary source region (lighter color). ¾ * : Both source regions are the same size. PIP/PBP Layout PIP/PBP Size Small Medium Large PBP, Main Left PPP PBP, Main TopPPP PBP, Main Right PPP
— 35 — DLP Projector — Owner’s Manual PIP/PBP LayoutPIP/PBP Size Small Medium Large PBP, Main Bottom PPP PIP-Bottom RightPPP PIP-Bottom LeftPPP PIP-Top Left PPP PIP-Top Right PPP