Eiki Projector EK-810U User Manual
Have a look at the manual Eiki Projector EK-810U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
— 36 — DLP Projector — Owner’s Manual Setup Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONSETUP English AutoOff On Language Ceiling Mount Rear Projection Lens Function Menu Preferences Keypad LED Settings Pin Communications Item Description Language This item allows you to select an available language for the OSD display\ . Ceiling Mount Turn the image upside down for ceiling-mounted projection. Rear Projection Reverse the image so you can project from behind a translucent screen. Lens Function Configure the lens function settings. See “Lens Function Menu” on page 37. Menu Preferences Configure the menu preferences settings. See “Menu Preferences Menu” on page 38. Keypad LED Settings Turn the backlight of keypad on/off. Pin Configure the pin settings. See “Pin Menu” on page 39. Communications Configure the communications settings. See “Communications Menu” on page 40.
— 37 — DLP Projector — Owner’s Manual Lens Function Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Lens Function and press the Enter button to enter the Lens Function menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONLens Function No Focus Zoom Lens Shift Lens Calibration Lens Lock Item Description Focus Adjust focus function on the projected image. Zoom Adjust zoom function on the projected image. Lens Shift Shift the projected image. Lens Calibration Perform calibration and return lens to the center position. Lens Lock Select this function to prevent all lens motors from moving. • Yes: Lens shift will be locked. • No: Lens shift can be used by user.
— 38 — DLP Projector — Owner’s Manual Menu Preferences Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Menu Preferences and press the Enter button to enter the Menu Preferences menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONMenu Preferences 0 On Menu Transparency Show Messages Item Description Menu Transparency Change OSD menu background to be transparent. Show Messages Display status messages on the screen.
— 39 — DLP Projector — Owner’s Manual Pin Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Pin and press the Enter button to enter the Pin menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONPin Off Pin Protect Change PIN Item Description PIN Protect The PIN (personal identification number) feature allows you to password protect your projector. Once you enable the PIN feature, you must enter the PIN before you can project an image. (PIN Default : 12345) Change PIN Change the PIN.
— 40 — DLP Projector — Owner’s Manual Communications Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select SETUP and press the Enter button to enter the SETUP menu. Press the arrow keys (pq) to select Communications and press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. PICTURE OUTPUT SETUP OPTIONCommunications 19200 RS232 0 LAN WLAN Network Serial Port Baud Rate Serial Port Path Projector Address Item Description LAN Configure the local area network (LAN) settings. • DHCP: Turn the DHCP ON/OFF. • IP Address: Assign Network IP Address. • Subnet Mask: Assign Network Subnet Mask. • Default Gateway: Assign Network Default Gateway. • MAC Address: Display the network MAC Address value. • Apply: Apply Network settings. WLAN Configure the wireless local area network (WLAN) settings. • Enable: Enable/Disable WLAN. • Start IP: Start of IP Address. • End IP: End of IP Address. • Subnet Mask: Assign Network Subnet Mask. • Default Gateway: Assign Network Default Gateway. • MAC Address: Display network MAC Address value. • SSID: Assign Network Service Set Identifier. Network Configure the general network settings. • Projector Name: Display the projector hostname for Network. • Restart Network: Restart the network. • Network Factory Reset: Perform factory reset on the network settings. The Projector Name, LAN IP, WLAN IP, and SNMP settings will be reset. Serial Port Baud Rate Select the serial port and baud rate. Serial Port Path Select the serial port path from either RS232 or HDBaseT. Projector Address Set the projector address. The projector will respond to IR remotes set either at the same address as the projector or to IR remotes set to addr\ ess 0.
— 41 — DLP Projector — Owner’s Manual Option Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. Auto Source High Altitude Test Pattern Background Color Hot-Key settings Power Settings Light Source Settings Light Sensor Information Factory ResetPICTURE OUTPUT SETUP OPTIONOPTION On Off Off Logo Blank Screen Item Description Auto Source Select “On” to allow the projector to search for other signals if the current input signal is lost. When the setting is disabled, the projector will o\ nly search current input connection. High Altitude Set high altitude mode On/Off. When On, the fan will operate at high speed to ensure sufficient air flow for high altitudes. Test Pattern Choose the desired internal test pattern to display. Press the Pattern button to display next test pattern. Background Color Use this feature to display a “Logo”, “Blue”, “Black” or “White” screen when no signal is available. Hot-Key settings Assign a different function to the hot-key on the remote control by highlighting the function in the list and pressing the Enter button. Choose a function that does not already have a dedicated button, and assign the\ hot-key to that function, allowing you to quickly and easily use the cho\ sen function. Power Settings Configure the power settings. See “Power Settings Menu” on page 42. Light Source Settings Configure the light source settings. See “Light Source Settings Menu” on page 43. Light Sensor Calibrate the Light Sensor for use with the Constant Luminance mode, which allows the projector to be set for constant brightness. If the Lig\ ht Sensor has not been calibrated, Constant Luminance mode will be disabled. Information Display the projector information for source, resolution, and software version on the screen. Factory Reset Restore all settings to their default value. It will not reset network. WARNING: After resetting, lens calibration is necessary. Service For service only.
— 42 — DLP Projector — Owner’s Manual Power Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. Standby Power Mode Direct Power On Auto Power Off Sleep TimerPICTURE OUTPUT SETUP OPTIONPower Settings Communication mode Off 20 Mins No Item Description Standby Power Mode Set the standby power mode. • 0.5W mode: The projector is in standby mode when connected to AC power. (
— 43 — DLP Projector — Owner’s Manual Light Source Settings Menu Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Light Source Settings and press the Enter button to enter the Light Source Settings menu. Press the arrow keys (pq) to select the menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu ) to select or adjust the desired settings and press the Enter button to confirm. Light Source Mode Constant Power Settings Constant Luminance Settings Total Projector HoursPICTURE OUTPUT SETUP OPTIONLight Source Settings Constant Power 10 100 Item Description Light Source Mode Select Constant Power, Constant Luminance, or Eco Mode. When in Eco Mode, the projector will adjust to the lowest fan speed and switch the light source power to the minimum setting. Constant Power Settings Set the value of the light source power (in Watts). Constant Luminance Settings Set the value for the Constant Luminance to maintain constant brightness. The light sensor will monitor the light level and will apply more power \ as the light source brightness decays naturally over time. When the light sourc\ e setting reaches maximum power, it will remain at this setting. Note that the light sensor needs to be calibrated for Constant Luminance mode to work properly. Total Projector Hours Display the projection time.
— 44 — DLP Projector — Owner’s Manual Control Your Projector Using Web Browser Ethernet Projector Wired LAN Terminal functionalities Remote control and monitoring of a projector from a PC (or Laptop) via\ wired LAN is also possible. Compatibility with Crestron control boxes enables not only collective pr\ ojector management on a network but also management from a control panel on a PC (or Laptop) browser s\ creen. • Crestron is a registered trademark of Crestron Electronics, Inc. of the \ United States. Supported External Devices This projector is supported by the specified commands of the Crestron Electronics controller and related software (ex, RoomView ®). http://www.crestron.com/ For more detail of information about the diverse types of external devic\ es which can be connected to the Ethernet port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service\ team directly.
— 45 — DLP Projector — Owner’s Manual LAN_RJ45 1. Connect an RJ45 cable to Ethernet port on the projector and the PC (Lap\ top). 2. On the PC (Laptop), select Start → Control Panel → Network and Internet. 3. Right-click on Local Area Connection , and select Properties.