Eiki Projector EK-600U User Manual

							— 17 — 
DLP Projector — Owner’s Manual
On-Screen diSplay (OSd) Menu SettinGS 
OSD Menu Controls
The projector has an OSD that lets you make image adjustments and change\
 various settings.
Navigating the OSD
You can use the remote control cursor buttons or the projector keypad to \
navigate and make changes to 
the OSD.
ModeAV Mute
ENTER
Source Volume V Keystone
Info.Re-Sync
MenuP
g
B
A
C
1. To enter the OSD, press the Menu button A. 
PICTURE
Display Mode Presentation
Brightness
Contrast
Sharpness
Color
Tint
Advanced
2. Use the arrow keys (pqtu ) to navigate within the menu and 
adjust a setting up or down 
b.
3. Press the Enter button to enter the submenu or confirm the  selection/setting 
C.
4. Press the Menu button again to return to the previous menu or exit menus if at top level 
A.
Caution: 
Depending on the video source, not all items in the OSD are available. I\
tems that are not available 
cannot be accessed and are grayed out.   
						

							— 18 — 
DLP Projector — Owner’s Manual
Setting the OSD language
Set the OSD language to your preference before continuing.
1. Press the Menu button. 
PICTURE
Display ModePresentation
Brightness
Contrast
Sharpness
Color
Tint
Advanced
2. Use the arrow keys (pq) to select SETUp and press the Enter button to enter the SETUp menu.
SETUP
Language English
Projection
Screen Type
Menu Location
Pin
Projector ID
Audio Settings
3. Use the arrow keys (pq) to select language and  press the Enter button to enter its submenu. language
Exit
4. Use the arrow keys (pqtu) to select the desired 
language and press the  Enter button to enter its 
confirm.
5. Press the Menu button several times to exit the  menu.  
						

							— 19 — 
DLP Projector — Owner’s Manual
OSD Menu Overview
Use the following illustration to quickly find a setting or determine the range for a setting.
maIn menusub menu / settIngsDefauLt
PICTURE Display Mode
Presentation
Presentation
(Each mode can  adjust and save  in each mode). 
Bright
Movie
sRGB
Blackboard
DICOM SIM.
User
3D
Brightness -50 ~ 50
By source set
Contrast
-50 ~ 50
Sharpness 1 ~ 15
Color -50 ~ 50
Tint -50 ~ 50
Advanced Noise Reduction
0 ~ 10
BrilliantColor™ 1 ~ 10
DynamicBlack™ On / Off Off
Gamma Film
By source set
Graphics
1.8
2.0
2.2
2.6
Blackboard
DICOM
Color 
Temperature Warm
By source set
Standard
Cool
Cold
Color Space not hDMI 
Input:
Auto
Auto
RGB
YUV
hDMI Input:
Auto
RGB(0~255)
RGB(16~235)
YUV  
						

							— 20 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
PICTURE Advanced Color Settings
Red Gain
-50 ~ 50
By source set
Green Gain
-50 ~ 50
Blue Gain -50 ~ 50
Red Offset -50 ~ 50
Green Offset -50 ~ 50
Blue Offset -50 ~ 50
Reset Yes / No
Exit
Color Matching Red 
Hue
-50 ~ 50
By source set
Saturation
Gain
Exit
Green Hue
-50 ~ 50
Saturation
Gain
Exit
Blue Hue
-50 ~ 50
Saturation
Gain
Exit
Cyan  Hue
-50 ~ 50
Saturation
Gain
Exit
Magenta  Hue
-50 ~ 50
Saturation
Gain
Exit
Yellow Hue
-50 ~ 50
Saturation
Gain
Exit
White Red
-50 ~ 50
Green
Blue
Exit
Reset Ye s
 No
Exit  
						

							— 21 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
PICTURE Advanced Signal  (VGA 
input)
Auto Image
On
On
Off
Phase  0 ~ 31
Frequency   -10 ~ 10
Horz Position  -10 ~ 10
Vert Position  -10 ~ 10
Exit
Signal  (Video 
input) White Level
 0 ~ 31 16
Black Level  -5 ~ 5 0
IRE  0
0 (NTSC only)
7.5
Exit
Exit
Reset Ye s
 No
OUTPUT Aspect Ratio
4:3
Auto
16:9 or 16:10
LBX
Native
Auto
Zoom  -5 ~ 25 0
Edge Mask  0 ~ 10 By source set
Image Shift H
 -100 ~ 100
0
V
 -100 ~ 100
Image Warping H. Keystone
 -30 ~ 30
V. Keystone  -30 ~ 30
Auto V. 
Keystone On
Off
Off
Four Corners Top-Left
Top-Right
Bottom-Left
Bottom-Right
Reset Ye s
No
Exit  
						

							— 22 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
OUTPUT 3D Display 3D Mode
DLP-Link
Off
VESA 3D
Off
3D→2D 3D
3D
L
R
3D Enable Auto
Auto
Side by Side 
Top and Bottom
Frame 
Sequential
3D Invert On
Off
Off
Exit
SETUP Language English
Deutsch
Français
Italiano
Español
Português
Svenska
Nederlands
Norsk/Dansk
Polski
Русский
Suomi
Magyar
Čeština
繁體中文
簡体中文
日本語
한국어
ไทย
Türkçe
Indonesian
Projection Front
Front
Rear
Front-Ceiling
Rear-Ceiling
Screen Type 16:10
16:10
16:9  
						

							— 23 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
SETUP Menu Location
Top-Left 
Center
Top-Right
Center
Bottom-Left
Bottom-Right
Pin Pin Protect
On
Off
Off
Security Timer Month
Day
Hour
Change PIN 1234
Exit
Projector ID  00 ~ 99 00
Audio Settings Internal Speaker
On
On
Off
Mute On
Off
Off
Audio Settings Volume
Audio
 0 ~ 10
5
Mic  0 ~ 10
Audio Input Default
Default: 
VGA1  -> Audio  1 (mini jack)
VGA2  -> Audio  2 (mini jack)
Video, S-Video 
-> Audio 3 (L/R)
Audio1
Audio2
Audio3
Audio 
Out(Standby) On
Off
Off
Exit
Advanced Logo
Default 
Default
User
Neutral
Logo Capture
Closed 
Captioning Off
Off
CC1
CC2
Exit
HDBaseT 
Control Ethernet
On
Off
Off
RS232 On
Off
HDBaseT Mode Auto
Auto
HDBaseT
Exit  
						

							— 24 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
SETUP Communication LAN
Network Status
Connect / 
Disconnect
Read-Only
MAC Address xx : xx : xx : xx : 
xx : xx
DHCP On / Off Off
IP Address 192.168.0.100 192.168.0.100
Subnet Mask 255.255.255.0 255.255.255.0
Default Gateway 192.168.0.254 192.168.0.254
DNS 192.168.0.1 192.168.0.1
Exit
Control Settings Crestron 
On
On (port: 41794)
Off
Extron On
On (port: 2023)
Off
PJLink On
On (port: 4352)
Off
AMX Device 
Discovery On
On (port: 9131)
Off
Telnet On
On (port: 23)
Off
HTTP On
On (port: 80)
Off
Exit
Reset
Exit
Exit
OPTIONS Input Source
VGA1
VGA2
Video
S-Video
HDMI1
HDMI2
Displayport
HDBaseT
Exit
Source Lock On
Off
Off
High Altitude On
Off
Information Hide On
Off (Warning 
message and  Power off 
message are  not hidden).
Off  
						

							— 25 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
OPTIONS Keypad Lock
On
Off
Off
Display Mode 
Lock On
Off
Test Pattern None
None
Grid
White Pattern
Background 
Color Black
Blue
Red
Blue
Green
White
Wall Color Off
Off
Light Yellow
Light Green
Light Blue
Pink
Gray
Remote Settings User1
HDMI2
Test Pattern
DP
VGA2
S-Video
Test Pattern
Zoom
Info.
HDBaseT
User2 HDMI2
Zoom
DP
VGA2
S-Video
Test Pattern
Zoom
Info.
HDBaseT
IR Function All
All
Front
To p
Off
Projector 
Address 00 ~ 99
00
Exit
12V Trigger On
Off
Off
Beep On
On
Off  
						

							— 26 — 
DLP Projector — Owner’s Manual
maIn menusub menu / settIngsDefauLt
OPTIONS Advanced
Direct Power On
On
Off
Off
Auto Power Off 
(min) 0-180 (one step: 
5 mins)
20
Sleep Timer 
(min) 0-990 (one step: 
10 mins )
0
Repeat Off
Quick Resume On
(EK601W only) Off
Off
Standby Power 
Mode Normal
Eco.
Eco.
Exit
Lamp Settings Lamp Hours
Read only
Lamp Reminder On
On
Off
Lamp Mode Bright
Bright
Eco
Power
Power 365W
292W
350W
330W
310W
300W
292W
Lamp Hours 
Reset Ye s
No
Exit
Filter Usage 
Hours Read only
Optional Filter 
Installed Ye s
No
No
Filter Reminder Off
500 hr
300 hr
500 hr
800 hr
1000 hr
Filter Reset Ye s
No
Exit
Information
Reset Ye s
No
Exit