Eiki Projector EK-501W User Manual

11
Compliance
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories (UL) 
and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit 
into the power outlet. Do not try to defeat this safety feature....

12
Accessories
Owner's Manual(CD)AC Power cordRemote control with batteries
(AA or LR6)
VGA cable Quick start guide Lens Cover
US Type x1
Euro Type x1  

Overview
This chapter presents names and 
functions of individual component. 

14
Name and function of your projector
Front/top
 Projection lens
 Air intake with filter
 POWER indicator (Refer to Page 69)
– The power indicator turns steady red when your projector is in standby m\
ode 
–  It turns steady green when your projector is in normal operation 
  STATUS indicator (Refer to Page 69)
It flashes red when internal temperature of your projector is out of operation range
 FILTER indicator (Refer to Page 69)
It turns red when the filter needs be replaced 
 Lens release button
12...

15
Name and function of your projector
Rear
 ON/STAND-BYPower on or off your projector 
 Arrow  
–  Select items or adjust values in the 
OSD menu.
–  Select display area in digital zoom+ 
mode 
–  Adjust the volume.
 ZOOM/FOCUS 
– Enter the optical zoom adjustment 
mode
–  Enter the focus adjustment mode 
 BLANK 
Dark out screen images temporarily 
 MENU Open or close the OSD menu 
 LENS SHIFT 
Enter the lens moving mode 
 ENTER 
Enter the OSD menu or select options in 
a menu 
 INPUT Select source of...

16
Terminal
 LAN Connect network cable to this port for con -
trolling and operating your projector via 
network. 
  VIDEO INConnect video output signal to this terminal. 
 S-VIDEO INConnect S-VIDEO output signal of video 
device to this terminal.
 VGA IN Connect output signal from computer to this 
terminal.
 MONITOR OUT Transmit signals from  to other displays 
when your projector is acting as a display 
output.
  R(PR)/G(Y)/B(PB)/H(HV)/V–  Connect RGBHV format (5-core) signals to 
R/G/B/HS/VS terminal...

17
* Laser Transmitting Window: 
  Laser beam will emit from this window while 
  pressing LASER button during the projection 
  to use the remote controller as a laser pointer.   
  
  Do not stare directly at the laser transmitting  
  window or aim the window at human body, to 
  avoid any physical injury. 
  POWERPower on or off your projector.
 LASERPress the LASER button during presentation to 
use the remote controller as laser pointer
 HDMISelect HDMI input source 
 DVISelect DVI input source...

18
⑨⑩
⑪ ①
⑤ ⑦
⑥
⑧
②
*
③
④
⑬
⑭ ⑮ ⑫
⑱
⑲㉑ ㉗
㉓
㉕ ⑯
⑰
⑳ ㉒
㉖
㉙ ㉘
㉔
 
TIMER
Enable the timer function
 LENS SHIFTEnter the lens moving mode 
 FREEZEFreeze projected images
 KEYSTONEKeystone calibration
The keystone calibration mode changed as:
H/V Keystone -> Corner Keystone -> H/V 
Keystone -> ....
 INFO.Display current status information of your pro -
jector 
  ZOOM Enter the zooming mode 
 SCREEN Select screen size 
 D.ZOOM+Zoom in projected image 
 D.ZOOM- Zoom out projected image 
 Wired remote controller...

19
 Open the battery cover.
 Insert a new battery in it.
Two AA  batteries
Place your batteries with its 
anode and cathode (+ and -) 
in correct direction. Keep both 
poles in good connection to the 
contacts within the compartment.
 Put the cover back.
Install battery of remote controller
Name and function of your projector
Please follow the following rules for safety operation: 
● Use two of AA or LR6 alkaline batteries.
● Replace both batteries at the same time.
● Do not mix new and old batteries as...

Installation
This chapter introduces the information 
of install.