Eiki Projector EK-401W User Manual

– 27 – 
Settings 1 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 1 menu. Press the cursor ▲▼ button to move up and down in the Settings 1 menu. Press 
◄► to enter and change values for settings. 
 
ITEM DESCRIPTION 
Source 
Press the cursor ◄► button to enter the Source menu. oeference input Source 
select 
(Io L KeypadFK 
Projection Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect Ratio Press the cursor ◄►...

— 28 — 
Audio 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press the cursor ◄► button to enter and adjust the audio volume.  
Mute Press the cursor ◄► button to enter and turn on or off the speaker. 
  

– 29 – 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language Press the cursor ◄► button to enter and select a different localization MenuK 
Security Lock  Press the cursor ◄► button to enter and enable or disable security lock functionK 
Blank Screen Press...

— 30 — 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D modeK 
3D Sync Invert Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format Press the cursor ◄► button to enter and enable or disable different 3D Format. 
 
Note: 
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for...

– 31 – 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press 
▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 2 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern Press the cursor ◄► button to enter and select internal test patternK 
H Image Shift Press the cursor ◄► button to enter and select H Image ShiftK 
V Image Shift Press the cursor ◄► button to...

— 32 — 
Settings 2 Menu  
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the 
Settings 2 menu. Press the cursor ▲▼ button to move up and down in the Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source Press the cursor ◄► button to enter and enable or disable automatic source 
detection.  
No Signal Power 
Off (min.) 
Press the cursor ◄► button to enter and enable or disable automatic shutdown of 
lamp when no signal.  
Auto Power On Press the cursor ◄► button to enter...

– 33 – 
Status 
Press the cursor ▲▼ button to move up and down in the Settings 2 menu. Select the Status menu 
and press Enter or ► to enter. 
 
ITEM DESCRIPTION 
Active Source Display the activated source. 
Video Information Displays resolution/video information for RGB source and color standard for Video 
source. 
Lamp Hours Lamp hour used information is displayed. (Eco, Normal, Dynamic Eco) 
Serial Number Showing serial number of product. 
Software Version Showing system software version. 
  

— 34 — 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 2 menu. Press 
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down 
in the Advanced 1 menu. Press ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position Press the cursor ◄► button to enter and select different OSD location. 
Translucent Menu Press the cursor ◄► button to enter and select OSD background translucent level.  
Low Power Mode...

– 35 – 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp on page 50 to reset the lamp hour counter. 
 
Network 
 
ITEM DESCRIPTION 
Network State Displays the network connection status. 
DHCP 
Press ◄► to turn DHCP On or Off. 
Note: If you select DHCP Off, complete the IP Address, Subnet Mask, Gateway, and 
DNS fields. 
IP Address  Enter a valid IP address if DHCP is turned off. 
Subnet Mask Enter a valid Subnet Mask if DHCP is turned off. 
Gateway Enter a valid Gateway address if DHCP is turned...

— 36 — 
LAN_RJ45 
 
Wired LAN Terminal functionalites 
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible. 
Compatibility with Crestron / AMX (Device Discovery) / Extron control boxes enables not only collective 
projector management on a network but also management from a control panel on a PC (or Laptop) 
browser screen. 
 Crestron is a registered trademark of Crestron Electronics, Inc. of the United States. 
 Extron is a registered trademark of Extron...