Eiki Projector Eip Wss3100 User Manual

							30English ...
Mute
Choose “On” to turn mute on. `
Choose “Off” to turn mute off. `
Volume
Press the ◄ button to decrease the volume. `
Press the ► button to increase the volume. `
Microphone Volume
Press the ◄ button to decrease the microphone Volume. `
Press the ► button to increase the microphone Volume. `
Volume
VolumeMuteVolumeMicrophone Volume
Off
SelectEnterExit 
						

							31... English
Logo
Use this function to set the desired startup screen. If changes are made\
 they will 
take effect the next time the projector is powered on.
Default: The default startup screen. `
User: Use stored picture from “Logo Capture” function. `
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Screen capture in progress...Please wait...
For successful logo capture, please ensure that the onscreen image does \
not exceed the projector’s 
 
 
native resolution. (WXGA:1280x800).
“Logo Capture” is not available when 3D is enabled.
 
 
Before active this function, it is recommended that “Aspect Ratio” is set to the “Auto”.
 
 NoteNote
Auto Source
On: The projector will search for other signals if the current input sig\
nal is lost. `
Off: The projector will only search current input connection. `
Input
Press ► button to enable/disable input sources. The projector will not search for 
inputs that are not selected.
Options
OptionsLogoLogo CaptureAuto SourceInputAuto Power Off (min)Lamp SettingsDynamic BlackHigh AltitudeFilters Remind (Hour)Information
Default
On
OnOff
SelectEnterExit 
						

							32English ...
SelectEnterExit
Input
HDMI
VGA 1
VGA 2
S-Video
Composite
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no 
signal being sent to the projector. The projector will automatically pow\
er off when 
the countdown has finished (in minutes).
Lamp Setting
Refer to page 33.
Dynamic Black
On: The pictures with the optimum contrast will be displayed by automati\
cally  `
providing signal compensation to suit the pictures concerned.
Off: Turn off this function. `
“Dynamic Black” is available when “Color Mode” is set to “Movie”.
 
 
“Dynamic Black” is not available when “3D” or “Interactive” is enabled.
 
 
When “Dynamic Black” is available, “Lamp Power Mode” selection is not available.
 
 NoteNote
High Altitude
On:   The built-in fans run at high speed. Select this option when using the  `
projector at altitudes above 2500 feet/762 meters or higher.
Off:  The built-in fans automatically run at a variable speed according to the\
  `
internal temperature.
Filters Remind (Hour)
Filters Remind (Hour): Set the filter reminder time `
Cleaning Up Reminder:   Select “Yes” to reset the dust filter hour counter after  `
replacing or cleaning the dust filter.
Information
Display the projector information for model name, SNID, source, resolution, software 
version, color space and aspect ratio on the screen. 
						

							33... English
Lamp Hours Used (Normal)
Display the projection time of normal mode.
Lamp Hours Used (ECO)
Display the projection time of ECO mode.
Lamp Life Reminder
On: Choose “On” to show the lamp end of life warning message. `
Off: Choose “Off” to hide the lamp end of life warning message. `
Lamp Power Mode
Normal: Normal mode. `
ECO:  Use this function to dim the projector lamp which will lower power  `
consumption and extend the lamp life.
Clear Lamp Hours
Choose “Yes” to reset the lamp hour counter after replacing the lamp.
Options | Lamp Settings
SelectEnterExit
Lamp Settings
Lamp hours used (Normal)Lamp hours used (ECO)Lamp life reminderLamp Power ModeClear lamp hours
OffNormal 
						

							34English ...
3D
3D
Auto:  When a HDMI1.4a 3D timing identification signal is detected, the 3D image  `
is selected automatically.
Choose “Off” to disable 3D function. `
Choose “On” to enable 3D function. `
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D glasses, you may 
need to execute “Invert” to get best match of left/right image sequence to get the 
correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame Packing”, “Side-by-Side 
(Half)”, “Top and Bottom”, “Frame Sequential” and  “Field Sequential”.
“Frame Sequential” is supported the DLP Link 3D input signals from VGA / HDMI connector.
 
 
“Frame Sequential” / “Field Sequential” are supported the HQFS 3D input signals from Composite/S-
 
 
video connector connector.
“Frame Packing” / “Side-by-Side(Half)” / “Top and Bottom” are supported from HDMI 1.4a 3D input 
 
 
signals.NoteNote
1080p @24
Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @ 
24 frame packing.
3D3D3D Invert3D Format1080p@24
OffOff
SelectEnterExit 
						

							35... English
The Interactive function is available when displaying graphic source from HDMI/VGA input. Other sources 
 
 
are not supported.
If “3D” or “Dynamic Black” function is enabling, “Interactive” feature is disabling.
 
 NoteNote
Interactive Settings
Use this feature to select the Interactive Pen function. 
Choose “Off” to disable the Interactive Pen function. `
Choose “IR Camera” to enable the Interactive Pen function. `
You need to unplug the Mini USB cable that connects NB/desktop with the projector 
before using the Interactive function. After you complete the Interactiv\
e Settings in 
OSD, use Mini USB cable to connect NB/desktop with the projector.
The IR camera Interactive function needs an external IR camera. Please refer to 
below figure and plug in IR camera to projector before projector was installed.
(*)Interactive Kit IK-US10 (Option)
Interactive
InteractiveInteractive SettingsPB SettingOff
SelectEnterExit
* 
						

							36English ...
LAN
LANDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset
SelectEnterExit
Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
DHCP:  If a DHCP server exists in the network to which the projector is  `
connected, the IP address will automatically be acquired when you select 
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, 
and Gateway. Use ▲ or ▼ to select the number of IP address, Subnet 
Mask, and Gateway. 
IP Address: Select an IP address. `
Subnet Mask: Configure the Subnet Mask of the LAN connection. `
Gateway:   Check the Gateway address with your network/system administrator if  `
you configure it manually.
DNS:  Check the DNS Server IP address with your network/system administrator  `
if you configure it manually.
Store:   Choose “Yes” to save the changes made in network configuration  `
settings.
Reset:   Choose “Yes” to return the display parameters on all menus to the factory  `
default settings. 
						

							37... English
Turn on DHCP to allow a DHCP server to automatically assign an IP, or 1. 
manually enter the required network information.
LAN SettingsDHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Select
Enter Exit
Open your web browser and type in IP Address from the OSD LAN. 2. 
Based on network web-page for the input-string in [tools] tab, the limitation for 3. 
Input-Length is in the below list (“space” and the other punctuation key included): 
Category ItemInput-Length 
 
(characters)
Projector Projector Name
21
Location 21
Administrator 21
Admin Password New Password
4
Confirm 4
Note: The characters allowed to be input are 0-9, and a-Z.
Web Management
Use Internet Explore 7/8/9 or Safari version 5.0.3 to enter the IP  address. You can now access Web   Management and manage the projector from a remote location.NoteNote 
						

							38English ...
When making a direct connection from your computer to the projector
Step 1: Find an IP Address 
(192.168.10.100) from LAN function 
of projector.
Step 2: To open Network Connections, 
click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks  , click Change settings of this connection.
Step 3: On the General tab, under This 
connection uses the following 
items, click Internet Protocol (TCP/
IP), and then click “Properties.”
Step 4: Click Use the following IP 
address, and type in as below:
IP address: 192.168.10.99 `
Subnet mask: 255.255.255.0 `
Step 5: To open Internet Options, 
click IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...” 
Step 6: The Local Area Network (LAN) 
Setting dialog box appears, In the 
Proxy Server area, cancel the Use a proxy server for your LAN check box., then click “OK” button twice.
Step 7: Open your IE and type in the IP 
address of 192.168.10.100 in the 
URL then press “Enter” key.          
						

							39... English
Projector Information Page
Projector Information page by entering the projector’s IP address at \
the web  `
browser. See “LAN Settings” section.
Language: Allows you to set the language for web management. `
LAN Settings Page
Set up the Projector Name, Location and Administrator information (up to 21  `
characters for each field). Press Save to store the settings.
Choose DHCP to assign an IP address to the projector from a DHCP server \
 `
automatically, or Manual to assign an IP address manually.
Set up the IP Address, Device ID and Port information on the Crestron function. `