Eiki Projector EIP-4500 User Manual
Have a look at the manual Eiki Projector EIP-4500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Troubleshooting \Take the following steps for checking the network settings for the computer. 1. Open a command prompt (MS-DOS Prompt). •In the case of Windows ® 98 or 98SE: click “start” ➔ “Programs” ➔ “MS-DOS Prompt” in order. •In the case of Windows ® Me: click “start” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS Prompt” in order. •In the case of Windows ® 2000: click “start” ➔ “Programs” ➔ “Accessories” ➔ “Command Prompt” in order. •In the case of Windows ® XP: click “start” ➔ “All Programs” ➔ “Accessories” ➔ “Command Prompt” in order. 2.After launching the command prompt (MS-DOS Prompt), enter the command “ipconfig”, and press the “Enter” key. Note •Communication may not be established even after carrying out the network settings for the computer. In such cases, restart your computer. C:\>ipconfig Note •Usage examples of ipconfig C:\>ipconfig /? displays how to use “ipconfig.exe”. C:\>ipconfig displays the set IP address, subnet mask and default gateway. C:\>ipconfig /all displays all the setting information related to TCP/IP. 3.To return to the Windows® screen, enter “exit” and press the “Enter” key.
52 \Check if the “TCP/IP” protocol is operating correctly using the “PING” command. Also, check if an IP address is set. 1. Open a command prompt (MS-DOS Prompt). •In the case of Windows ® 98 or 98SE: click “start” ➔ “Programs” ➔ “MS-DOS Prompt” in order. •In the case of Windows ® Me: click “start” ➔ “Programs” ➔ “Accessories” ➔ “MS-DOS Prompt” in order. •In the case of Windows ® 2000: click “start” ➔ “Programs” ➔ “Accessories” ➔ “Command Prompt” in order. •In case of Windows ® XP: click “start” ➔ “All Programs” ➔ “Accessories” ➔ “Command Prompt” in order. 2. After launching the command prompt (MS-DOS Prompt) enter a command “PING”. Entry example C:\>Ping XXX.XXX.XXX.XXX “XXX.XXX.XXX.XXX” should be entered with an IP address to be connected to, such as the projector. 3. When connecting normally, the display will be as follows. (The screen may be slightly different depending on the OS type.) when the IP address connected to is “192.168.150.2” 4. When a command cannot be sent, “Request time out” will be displayed. Check the network setting again. If communication can still not be established properly, contact your network administrator. 5. To return to the Windows ® screen, enter “exit” and then press the “Enter” key. A connection cannot be made because you have forgotten your user name or your password. \Initialize the settings. (See page 88 on the owner’s manual of the projector.) \After the initialization, carry out setting again. Troubleshooting
53 Dimensions Units: inches (mm) 16 5/32 (410) 4 11/32 (110.1) 3 3/4 (94.9) 7 1/16 (179) 7 1/16 (179) 3 23/64 (85) 9 39/64 (243.9) 13 5/8 (346) 5 47/64 (145.5)45/64 (17.5) 7 3/32 (180) 3 55/64 (97.8) 3 23/32 (94.3) 31/64 (12.1) 18 35/64 (471) M43 3/64(77.27) M4M4 Side ViewSide ViewTop View Rear View Front View Bottom View