Eiki Lc-Xnp4000 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xnp4000 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 58
55
Maintenance of Projector
Additional
- In order to ensure the safe use of your projector, please contact your dealer to inspect
about once a year.
- Before maintenance, make sure the power cable is unplugged, allow the pr\
ojector to
cool sufficiently. The high temperature state of the projector could cause a burn in and/
or malfunction to the projector.
-Never try to maintain the inside of the projector by yourself.](http://img.usermanuals.tech/thumb/1702/89125/w64_eiki-lc-xnp4000-manual_d-57.png "Page 58
55
Maintenance of Projector
Additional
- In order to ensure the safe use of your projector, please contact your dealer to inspect
about once a year.
- Before maintenance, make sure the power cable is unplugged, allow the pr\
ojector to
cool sufficiently. The high temperature state of the projector could cause a burn in and/
or malfunction to the projector.
-Never try to maintain the inside of the projector by yourself.")
![Page 60
57
Troubleshooting
Error For Machine Defects
The following problems may be confused with a machine defect. Check and \
follow the
table. If it couldn’t be improved, contact your dealer.
SymptomCause / Remedy
Projector power
does not turn onThe power cord is disconnected.
Plug the power cord into an AC outlet.
Intending to turn on the projector again during the cool down
mode.
Wait until the cool down mode has completed.
There is no lamp and/or lamp cover is not firmly closed.
Please turn off the power...](http://img.usermanuals.tech/thumb/1702/89125/w64_eiki-lc-xnp4000-manual_d-59.png "Page 60
57
Troubleshooting
Error For Machine Defects
The following problems may be confused with a machine defect. Check and \
follow the
table. If it couldn’t be improved, contact your dealer.
SymptomCause / Remedy
Projector power
does not turn onThe power cord is disconnected.
Plug the power cord into an AC outlet.
Intending to turn on the projector again during the cool down
mode.
Wait until the cool down mode has completed.
There is no lamp and/or lamp cover is not firmly closed.
Please turn off the power...")
![Page 64
Appendix
Appendix
Menu Tree (PC Mode)
AUDIOContrast
Sharpness
NaturalCinema
Daylight Green Board
White Board
Black Board
Volume
Mute
H Position
Frequency
ADVANCE DBlank Power Off
DVI-I
PIN Lock Protectio
nOn 1
On 2
FrontCeilin g
Rear
Ceiling And Re a
r
Freeze
English…]Û Lþ_Í
Français
Deutsch
Italiano
Polski
Português
Español
ไทย
Svenska
1:1 MAC ADDR
.
PICTURE Brightness
SETTING V Position
Phase
Auto Keystone
V Keystone Auto Sync
Auto Search
Zoom / Pa n
Blank
Reset
Resize
4:3
16:9
Language...](http://img.usermanuals.tech/thumb/1702/89125/w64_eiki-lc-xnp4000-manual_d-63.png "Page 64
Appendix
Appendix
Menu Tree (PC Mode)
AUDIOContrast
Sharpness
NaturalCinema
Daylight Green Board
White Board
Black Board
Volume
Mute
H Position
Frequency
ADVANCE DBlank Power Off
DVI-I
PIN Lock Protectio
nOn 1
On 2
FrontCeilin g
Rear
Ceiling And Re a
r
Freeze
English…]Û Lþ_Í
Français
Deutsch
Italiano
Polski
Português
Español
ไทย
Svenska
1:1 MAC ADDR
.
PICTURE Brightness
SETTING V Position
Phase
Auto Keystone
V Keystone Auto Sync
Auto Search
Zoom / Pa n
Blank
Reset
Resize
4:3
16:9
Language...")
58 Troubleshooting Error For Machine Defects SymptomCause / Remedy No audioThe projector is not connected correctly. Check audio cable if connect correctly. The volume is set to minimum. Adjust the volume. Mute is turned on. Press the MUTE button. Remote control is not working No battery. Before using the remote control, please check the battery of remote control. Remote signal is obstructed. Remove the obstacle between projector and remote control.
59 Troubleshooting List of Supported Monitor Displays Computer mode / DVI-I mode SignalRefresh Rate (Hz) Resolution (dots) VGA 60 640x480 VESA 60 / 72 / 75 / 85 640x480 SVGA 56 / 60 / 72 / 75 /85 800x600 XGA 60 / 70 / 75 / 85 1024x768 SXGA 70 / 75 1152x864 SXGA 60 / 75 1280x960 SXGA 60 1280x1024 WXGA 60 / 75 1280x800 WXGA+ 60/ 75 / 85 1440x900 SXGA + 60 / 75 1400x1050 UXGA 60 1600x1200 WSXGA+ 60 1680x1050 MAC 67 1280x1024 / 640x480 MAC 75 832x624 MAC 75 1024x768 MAC 75 1152x870 Component (Y, Pb, Pr/ Y, Cb, Cr) SignalRefresh Rate (Hz) Resolution (dots) SDTV(480i / 576i) 30 / 25 720x480 / 720x576 SDTV(480p / 576p) 60 / 50 720x480 / 720x576 HDTV(720p) 60 1280x720 HDTV(1080i / 1080p) 30 / 60 1920x1080 Composite / S-Video SignalRefresh Rate (Hz) Resolution (dots) TV(NTSC) 60 720x480 TV(PAL,SECAM) 50 720x576
Appendix Technical Specifications •The specifications are subject to change without notice. Mechanical InformationProjector Type Multi-media Projector Dimensions(WxHxD) 325 x 265.4 x 110.4 mm Net Weight 3.4 kg Feet Adjustment up to 8.5° Panel Resolution LCD Panel System 0.63" TFT LCD Panel, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels 2,359,296 (1,024 x 768 x 3 panels) Signal Compatibility Color System PAL,SECAM,NTSC SD/HD TV Signal 480i, 480p, 575i, 575p, 720p, 1080i and 1080p Input Scanning Frequency H-sync. 31~92kHz, V-sync. 48~120Hz Optical Information Projection Image Size 40"~300" Diagonal Throw Distance Wide: 1.11~8.74M Tele: 1.36~10.52M Projection Lens F=1.6~1.9 / f=18.5~22.2mm Projection Lamp 245W Lamp Interface Input Terminals D-SUB 15 pin x 1 DVI-I x 1 Composite Video, RCA x 1 S-Video, Mini Din-4 x 1 Component Video, RCA x 3 3.5mm Mini-Stereo Audio Jack x 2 Audio RCA (Right /Left) x 2 Output Terminals D-SUB 15 pin x 1 3.5mm Mini-Stereo Audio Jack x 1 Control Terminals RS232 DB-9 x 1 USB Type B x 1 RJ45 x 1 Audio Speaker 8W mono speaker built-in Power Voltage and Power Consumption AC100~240V, 50/60Hz(full range) Operating Environment Operating Temperature 5℃ ~35 ℃ / 41 ℉ ~95 ℉ Storage Temperature -20℃ ~50 ℃ / -4 ℉ ~122 ℉
Appendix Appendix Menu Tree (PC Mode) AUDIOContrast Sharpness NaturalCinema Daylight Green Board White Board Black Board Volume Mute H Position Frequency ADVANCE DBlank Power Off DVI-I PIN Lock Protectio nOn 1 On 2 FrontCeilin g Rear Ceiling And Re a r Freeze English…]Û Lþ_Í Français Deutsch Italiano Polski Português Español ไทย Svenska 1:1 MAC ADDR . PICTURE Brightness SETTING V Position Phase Auto Keystone V Keystone Auto Sync Auto Search Zoom / Pa n Blank Reset Resize 4:3 16:9 Language Select Sourc e Logo SettingRGB 2 RGB 1 Y,Pb,PrVideoS-VideoLogo Mode Logo Capture Background Logo Size Display Mode PRESENTATION Auto Ceilin g Lamp Mode Lam p Reset Lamp Timer SECURITY Off Modify PINFilter Time r Reset Filter Time r Filter Counter 500 hours 800 hours 1000 hours User Dutch *DVI doesn’t support H / V POSITION, PHASE, FREQUENCY, AUTO SYNC function.
Appendix AUDIOContrast Sharpness NaturalCinema Daylight Green Board White Board Black Board Volume Mute ADVANCE DBlank Power Off DVI-I PIN Lock Protectio n On 1 On 2 FrontCeilin g Rear Ceiling And Rear Freeze MAC ADDR . PICTURE Brightness SETTING Auto Keystone Auto Sync Auto Search Zoom / Pa n Blank Reset Resize Select Sourc e Logo SettingRGB 2 RGB 1 Y,Pb,PrVideoS-VideoLogo Mode Background Logo Size Display Mode PRESENTATION Auto Ceilin g Lamp Mode Lamp Reset Lamp Time r SECURITY Off Modify PINFilter Time r Reset Filter Time r Filter Counter 500 hours 800 hours 1000 hours Color Tint OffClose Captio n C.C1 C.C2 C.C3 C.C4 T1 T2 T3 T4 User 1:1 4:3 16:9English…]Û Lþ_Í Français Deutsch Italiano Polski Português Español ไทย Svenska Language Dutch Menu Tree (Video Mode)
Appendix 110.40 325.00 265.40 195.00 255.00265.00 170.00 90.00 Appearance Screw for Ceiling Mounted M4x8mm 4pcs
Appendix Configurations of Terminal Analog RGB Input/Output (1) Connections(15P HD-Sub) 12345 678910 1112131415 (2) Pin Number Define Pin NO.Signal Name Connection 1R signal Input R 2G signal InputG/Sync. On G 3B signal Input B 4N.C.N.C. 5GNDGND 6R return(GND) GND 7G return(GND) GND 8B return(GND)GND 9N.C.N.C. 10N.C.GND 11Signal return(GND) N.C. 12DDC dataDDC/SDA 13HSYNC/TTL/Comp.sync H 14VSYNCV 15DDC clockDDC/SCL (3) Connector ●15P HD-Sub (4) Input signal polarity ●Video signal (RGB): Positive ●Sync: Positive, Negative (5)Input level ●Signal: 0.7V ±0.2V p-p 75Ω terminate, NRZ ●Sync: TTL (6)Composite Sync. ●TTL:Negative
Appendix Digital Visual Intergace(DVI-I) C5 Pin NO. Signal Name Pin NO. Signal Name Pin NO. 1 T.M.D.S. Data2- 9T.M.D.S. Data1- 17T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10T.M.D.S. Data1+ 18T.M.D.S. Data0+ 3 T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield 19 T . M . D . S . D a t a 0 / 5 Shield 4 T.M.D.S. Data4- 12T.M.D.S. Data3- 20T.M.D.S. Data5- 5 T.M.D.S. Data4+ 13T.M.D.S. Data3+ 21T.M.D.S. Data5+ 6 DDC Clock/CLOCK 145V Power 22T.M.D.S. Clock Shield 7 DDC Data 15Ground(for +5V) 23T.M.D.S. Clock+ 8 No Connect 16Hot Plug Detect 24T.M.D.S. Clock- C1 Analog red C2Analog green C3Analog blue C4 Analog horizontal sync C5 Analog ground (Analog R,G,B return) (1) Connections (2) Pin Number Define
Appendix Component(Y,Pb,Pr/Y,Cb,Cr) (1) Connections Y / Y Pb /Cb Pr / Cr (2) Pin Number Define P2 P4 P6 P1 P3P5 YPb/Cb Pr/Cr Pin NO. Signal Name Connection 2 Y Y 4 Pb/Cb Cb 6 Pr/Cr Cr 1 Signal return(GND) GND 3 Signal return(GND) GND 5 Signal return(GND) GND (3) Connector:RCA Jack
Appendix Composite Video Signal (2) Pin Number Define (1) Connections VideoLR P in2 P in1 Pin NO. Signal Name Connection 1 Video Signal(GND) GND 2 Video Input V (3) Connector:RCA jack (4) Input signal polarity: Composite signal, Sync:Negative (5) Input level:Video signal: 1.0V ±0.2V p-p 75Ω terminate, NRZ