Eiki Lc-Xgc500 Multimedia Projector Owners Manual
Have a look at the manual Eiki Lc-Xgc500 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 77
76
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with th\
e V- and H-Frequency mentioned
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
Appendix
ON-SCREEN
DISPLA yRESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
VGA 1 640x480 31.470 59.880
VGA 2 720x400 31.470 70.090
VGA 3 640x400 31.470 70.090
VGA 4 640x480 37.860 74.380
VGA 5 640x480 37.860 72.810
VGA 6 640x480 37.500 75.000
VGA 7 640x480 43.269 85.000...](http://img.usermanuals.tech/thumb/1702/89113/w64_eiki-lc-xgc500-manual_d-76.png "Page 77
76
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with th\
e V- and H-Frequency mentioned
below and less than 140 MHz of Dot Clock. PC Adjustment is limited when selecting these modes.
Appendix
ON-SCREEN
DISPLA yRESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
VGA 1 640x480 31.470 59.880
VGA 2 720x400 31.470 70.090
VGA 3 640x400 31.470 70.090
VGA 4 640x480 37.860 74.380
VGA 5 640x480 37.860 72.810
VGA 6 640x480 37.500 75.000
VGA 7 640x480 43.269 85.000...")
![Page 78
77
When an input signal is digital from the DVI terminal, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu.
✔Notes:
• When the input signal is D-WXGA +1 images may not be displayed properly depending on computers
• Specifications are subject to change without notice..
Appendix
ON-SCREEN
DISPLA y RESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-VGA 640x480 31.470 59.940
D-480p 720x48031.470 59.880
D-575p 768x57531.250 50.000
D-SVGA...](http://img.usermanuals.tech/thumb/1702/89113/w64_eiki-lc-xgc500-manual_d-77.png "Page 78
77
When an input signal is digital from the DVI terminal, refer to the chart below.
PC Adjust Menu cannot be selected when Input 1 [RGB (PC digital)] is selected in the Input Menu.
✔Notes:
• When the input signal is D-WXGA +1 images may not be displayed properly depending on computers
• Specifications are subject to change without notice..
Appendix
ON-SCREEN
DISPLA y RESOLUTION H-Freq .
(kHz) V-Freq .
(Hz)
D-VGA 640x480 31.470 59.940
D-480p 720x48031.470 59.880
D-575p 768x57531.250 50.000
D-SVGA...")
![Page 81
80
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
Projector Input
RGB
RGB (Scart)
RGB (PC analog)
Video
Component
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 3
VIDEO 4
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ...](http://img.usermanuals.tech/thumb/1702/89113/w64_eiki-lc-xgc500-manual_d-80.png "Page 81
80
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
Projector Input
RGB
RGB (Scart)
RGB (PC analog)
Video
Component
PJLink Input
RGB 3
RGB 2
RGB 1
VIDEO 1
VIDEO 2
Video
S-video
VIDEO 3
VIDEO 4
Input 2
Input 3
PJLink is a registered trademark of JBMIA and pending trademark in some \
countries.
PJ...")
80 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input RGB RGB (Scart) RGB (PC analog) Video Component PJLink Input RGB 3 RGB 2 RGB 1 VIDEO 1 VIDEO 2 Video S-video VIDEO 3 VIDEO 4 Input 2 Input 3 PJLink is a registered trademark of JBMIA and pending trademark in some \ countries. PJ Link Notice Parameter 13 12 11 21 22 23 24 RGB (PC digital)DIGITAL 131 RGB (AV HDCP)DIGITAL 232 Input 1 NetworkNETWORK 151Input 4 Appendix
81 Terminal : D-sub 9 pin CONTROL PORT CONNECTOR Vcc - Data + Data Ground 1 2 3 4 2 34 1 INPUT 1/ANALOG OUT Terminal: Analog RGB (Mini D-sub 15 pin) 512341096781514131112 Configurations of Terminals USB CONNECTOR (Series B) DVI-D TERMINAL (DIGITAL) 1917 21018 31119 41220 51321 61422 71523 81624 T.M.D.S. Data2– No Connect T.M.D.S. Data2+ No Connect T.M.D.S. Data2 Shield DDC Clock DDC Data No Connect 1 5 2 4 3 6 7 8 T.M.D.S. Data1– No Connect T.M.D.S. Data1+ No Connect T.M.D.S. Data1 Shield +5V Power Ground (for +5V) Hot Plug Detect 9 13 10 12 11 14 15 16 T.M.D.S. Data0– No Connect T.M.D.S. Data0+ No Connect T.M.D.S. Data0 Shield T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock– 17 21 18 20 19 22 23 24 Appendix ----- R X D T X D ----- SG ----- RTS CTS Serial 1 2 3 4 5 6 7 8 -----9 Red Input Ground (Horiz.sync.) Green Input No Connect Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 Horiz. sync. Input (Composite H/V sync.) Ground (Vert.sync.) DDC Data Ground Vert. sync. Input DDC Clock 9 13 10 12 11 14 15 +5V Power Red Output Ground (Horiz.sync.) Green Output No Connect Blue Output Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 Horiz. sync. Output Ground (Vert.sync.) No Connect No Connect Vert. sync. Output No Connect 9 13 10 12 11 14 15 No Connect Input Output
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four-digit number be changed, the factory set number will be invalid. While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of the projector’s body while it is locked with a PIN code. PIN Code Lock No . Logo PIN Code Lock No . Appendix 82
Dimensions 3.94 (100.0)3.94 (100.0) 10.85 (275.5)3.15 (80.0) 5.55 (141.0) 5.55 (141.0) 6.89 (175.0) 3.70 (94.0) (PANEL CENTER) 3.44 (87.3) 17.76 (451.0) 15.59 (396.0) 21.66 (550.1) 3.5 ÃMAX Scre w Holes f or Ceiling Mount Scre w: M6 Depth: 0.393 (10.0) Unit: inch (mm) Appendix 83
U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] China EIKI (Shanghai) Co., Ltd. 1. Dapu Road, Golden Magnolia Plaza #2109 Shanghai, 200023 China Tel : 86-21-5396-0088 Fax : 86-21-5396-0318 E-mail : [email protected] Canada EIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax : 800-567-4069 (705)-527-4087 E-Mail : [email protected] Eastern Europe EIKI CZECH SPOL. s.r.o. Nad Cementárnou 1163/4a Paraha 4, Podolí 147 00 Czech Republic Tel : +42 02 4141 0928 +42 02 4140 3095 Fax: +42 02 4140 9435 E-Mail : [email protected] South East Asia EIKI Industrial (M) Sdn Bhd No. 3A-2C, 4th Floor, Jalan PJU 8/3A, Perdana Business Centre, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Malaysia Tel : +603-7722-4362 Fax : +603-7722-4392 E-Mail : [email protected] Japan & Worldwide EIKI Industrial Company Limited. 4-12 Banzai-Cho, Kita-Ku, Osaka, 530-0028 Japan Tel : +81-6-6311-9479 Fax : +81-6-6311-8486 WorldWide Website http://www.eiki.com © 2008 Eiki International, Inc.KH7BL