Home > Eiki > Projector > Eiki Lc-Xg250l Multimedia Projector Quick Reference Guide

Eiki Lc-Xg250l Multimedia Projector Quick Reference Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Eiki Lc-Xg250l Multimedia Projector Quick Reference Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 22
    Add page 21 to Favourites
    image text
    Enable zoom 
    							- 21 -
English
Press the ON/STAND-BY button on the top control or
the STAND-BY button on the remote control, and
“Power off?” appears on the screen.
Press the ON/STAND-BY button or the STAND-BY
button on the remote control again to turn off the
projector. The LAMP indicator turns off and the POWER
indicator starts to blink green. After the projector is
turned off, the cooling fans operates for 90 seconds.
During the POWER indicator is blinking, you cannot turn
on the projector.
1
2
TO MAINTAIN LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR STOPS BLINKING.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
3When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector. After it is cooled down completely,
unplug the AC power cord.
“Power off?” disappears after 4 seconds.
✔Notes:
•Do not operate the projector continuously without rest. Continuous
use may result in shortening the lamp life. Turn off the projector
and let stand for about an hour in every 24 hours.
•The running speed of cooling fans is changed according to the
temperature inside the projector.
•Do not put the projector in a case before the projector is cooled
enough.
•While the POWER indicator is blinking, the lamp is being cooled
down and the projector cannot be turned on. Wait until the
POWER indicator stops blinking to turn on the projector again.
Turning Off the Projector
    Add page 22 to Favourites
    image text
    Enable zoom 
    							- 22 -
Top Control
Menu bar Pointer(red framed )
Menu icon
Item data
Press the Point 
7 8
buttons to adjust the
value.
SELECT
button
Pointer (red framed )
Press the Point 
edbuttons
to move the pointer.
Item
How to Operate the On-Screen Menu
MENU button
SELECT button POINT buttons
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point 
7 8buttons to select a Menu icon. Use
the Point 
edbuttons to select an item to in the
selected menu.
Press the SELECT button to show the item data. Use
the Point 
7 8buttons to adjust the values.
To close the On-Screen Menu, press the MENU
button again. Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
✔Note:
•The selected item is not active until the SELECT button is pressed.
1
2
3
Remote Control
POINT buttons
SELECT button
MENU button
    All Eiki manuals Comments (0)

    Related Manuals for Eiki Lc-Xg250l Multimedia Projector Quick Reference Guide