Home > Eiki > Projector > Eiki Lc-Xbl25 Multimedia Projector Owners Manual

Eiki Lc-Xbl25 Multimedia Projector Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Eiki Lc-Xbl25 Multimedia Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							41
    Video Input
    Use	the	Point 	◄►	buttons 	to 	adjust 	the 	gamma 	value 	to	
    obtain	a	better	balance	of	contrast	(from	0	to	15).
    Gamma
    Press	 the	Point	◄	button	 to	decrease	 the	sharpness	 of	the	
    image;	 press	the	Point	►	button	 to	increase	 the	sharpness	
    of	the	image	(from	0	to	15).
    Sharpness
    An	interlaced	 video	signal	 can	be	displayed	 in	progressive	
    mode.	Select	one	of	the	following	options.
    	Off	.........	Disabled.
    	 L1
    	..........	For	an	active	picture.
    	 L2	..........	For	a	still	picture.
    	 Film	.......	For	watching	a	film.	With	this	function,	the	
    projector	reproduces	pictures	faithful	to	the	
    original	film	quality.
    Progressive
    Noise reduction
    Noise 	interference 	on 	the 	screen 	can 	be 	reduced. 	Select	
    one	of	the	following	options	to	get	smoother	images.
    	 Off	.........	Disabled.
      L1	..........	Lower	reduction	
    	 L2	..........	Higher	reduction
    Note:	
    	 		Noise reduction	and	Progressive	cannot	be	selected	
    when	480p,	575p,	720p,	1035i	or	1080i	is	selected	
    (p.38).
    To	 reset 	the	 adjusted	 data,	select 	Reset	and 	press 	the	
    SELECT 	button.	 A	confirmation	 box	appears	 and	then	 select	
    yes.	All	adjustments	will	return	to	their	previous	figures.	
    Reset
    Store
    To	store	the	adjusted	data,	select	Store	and	press	the	the	
    Point	►	or	the	SELECT 	button.	Use	the	Point	▲▼	buttons	
    to	select	one	from	Image	1	to	4	and	press	the	SELECT 	
    button.	
    A	confirmation	box	appears	and	then	select	yes.	Stored	
    data	can	be	called	up	by	selecting	an	Image (1–4)	in	the	
    Image	Mode	Selection	on	page	39.
    Store Menu
    A	confirmation	box	
    appears	and	then	
    select	yes. 
    						
    							42
    Video Input
    This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
    Normal
    Screen Size Adjustment
    Screen Menu1
    2
    Provide	the	image	at	the	4:3	normal	video	aspect	ratio.
    Custom
    Note:
    	 •	When	no	signal	is	detected,	Normal	is	set	
    automatically.
    	 •	The	adjustable	range	for	Scale H/V	and	
    Position H/V	is	limited	depending	on	the	
    input	signal.
    	 •	wide	cannot	be	operated	when	720p,	
    1035i	or	1080i	is	selected	in	the	 AV	
    System	Menu	(p.38).
    wide
    Provide	the	image	at	the	16:9	wide	screen	ratio.
    Press	the	MENU	button	to	display	the	On-Screen	
    Menu.	Use	the	Point	▲▼	buttons	to	select	Screen	and	
    then	press	the	Point	►	or	the	SELECT 	button.
    Use	the	Point	▲▼	buttons	select	the	desired	item	and	
    then	press	the	SELECT 	button.
    Adjust	the	screen	 scale	and	position	 manually	 with	this	
    function.
    Press	the	Point	►	button	at	Custom	and	the	Custom	is	
    displayed	on	the	screen,	you	can	use	the	Point	▲▼	buttons	
    to	choose	the	item	you	want	to	adjust.
    	Scale H/V	..........	Adjust	the	Horizontal/Vertical	screen	
    scale.
    	 H&V
    	...................	When	set	to	On,	the	aspect	ratio	is	
    fixed.	 The	Scale V	appears	dimmed	and	
    becomes	unavailable.	 Adjust	Scale H,	
    then	the	screen	scale	is	automatically	
    modified	based	on	the	aspect	ratio.	
    	Position H/V	.....	Adjust 	the 	Horizontal/Vertical 	screen	
    position.
    	 Common
    	...........	Save	the	adjusted	scale	or	position	to	all	
    the	inputs.	Press	the	SELECT 	button	at	
    Common	to	display	a	confirmation	box.	
    To	save	the	scale	or	position,	press	the	
    SELECT	button	at	yes.	When	Custom	
    is	selected,	the	saved	scale	or	position	is	
    used.
    	 Reset
    	.................	Reset	the	all	adjusted	values.	Press	
    the	SELECT 	button	at	Reset	to	display	
    a	confirmation	box.	 To	reset,	press	the	
    SELECT	button	at	yes. 
    						
    							43
    Setting
    Setting
    Language
    The	language	used	in	the	On-Screen	Menu	is	available	in	
    English,	German,	French,	Italian,	Spanish,	Portuguese,	
    Dutch,	Swedish,	Finnish,	Polish,	Hungarian,	Romanian,	
    Russian,	Chinese,	Korean,	japanese,Thai	and	Turkish.
    Setting Menu
    Press	the	MENU	button	to	display	the	On-Screen	
    Menu.	Press	the	Point	▲▼	buttons	to	select	Setting	
    and	press	the	Point	►	or	the	SELECT	button	to	access	
    the	submenu	items.
    1
    2Use	the	Point	▲▼	buttons	to	select	the	desired	item	
    and	then	press	the	Point	►	or	the	SELECT	button	to	
    access	the	selected	item.
    This	projector	 has	a	Setting	 menu	that	allows	 you	to	set	 up	
    the	other	various	functions	described	below.
    Language
    Menu position
    This	function	is	used	to	change	the	position	of	the	
    On-Screen	Menu.	Select	Menu position	and	press	the	
    SELECT 	button.		
    The	Menu	position	changes	each	time	you	press	SELECT 	
    button	as	follows.
    the	top	left		→	the	top	right		→	the	center	→	the	bottom	left	
    →	the	bottom	right	→	the	top	left	→.....
    3Use	the	Point	▲▼	buttons	select	the	desired	item	and	
    then	press	the	SELECT	button. 
    						
    							44
    Setting
    Note:
    	 •	Auto Keystone	corrects	vertical	distortion	only,	
    not	correct	horizontal	distortion.
    	 •	The	 Auto	Keystone	function	cannot	work	when	
    the	Ceiling	feature	is	set	On	in	the	Setting	menu	
    (p.49).
    	 •	Perfect	correction	of	the	image	distortion	cannot	
    be	ensured	with	the	 Auto	setup	function.	If	the	
    distortion	is	not	corrected	properly	by	pressing	the	
    AUTO	SETUP	or	the	AUTO	SET 	button,	adjust	
    manually	by	pressing	the	KEYSTONE	button	on	
    the	remote	control	or	selecting	Keystone	in	the	
    Setting	menu	(pp.23,	45).
    	 •	Fine sync,	Total dots,	Horizontal	and	Vertical	
    position	of	some	computers	cannot	be	fully	
    adjusted	with	the	 Auto	PC	Adjustment	function.	
    When	the	image	is	not	provided	properly	with	
    this	operation,	manual	adjustments	are	required	
    (pp.30-31).
    Auto setup
    Input search
    This	function	detects	the	input	signal	automatically.	When	
    a	signal	is	found,	the	search	will	stop.	Use	the	Point	▲▼	
    buttons	to	select	one	of	the	following	options.
    Off	...........	Input	search	will	not	work.
    On1..........	Input	search	works	under	the	following	situation.
    	 –	When	pressing	the	AUTO	SETUP	button	on	
    the	top	control.
    	 –	When 	pressing 	the 	AUTO	 SET	button 	on 	the	
    remote	control.
    On2..........	Input	search	works	under	the	following	situation.
    	 –	When	turning	on	the	projector	by	pressing	the	
    ON/STAND-BY 	button	on	the	top	control	or	the	
    remote	control.
    	 –	When 	pressing 	the 	AUTO	 SET	button 	on 	the	
    remote	control.
    	 –	When 	pressing 	the 	AUTO	 SETUP	button 	on	
    the	top	control.
    	 –	 	When	the	current	input	signal	is	cut	off.*
    *	If	the	No	show	or	Freeze	function	is	active,	cancel	it	to	
    activate	the	Input	search.	It	is	also	unavailable	when	
    On-Screen	menu	is	displayed.
    Auto PC adj .
    On........Enables	Auto 	PC 	Adjustment 	when 	pressing								
    the	 AUTO	 SET	button	 on	the	 remote	 control	or	
    the	AUTO	SETUP 	button	on	the	top	control.
    Off	.......Disables	Auto	PC	Adjustment.
     Auto Keystone
     
    Auto
    	. . . . .Always	works	and	corrects	keystone	distortion	
    according	to	the	projector's	tilt.
    Manual....Works	only	when	pressing	the	 AUTO	SETUP	
    button	on	the	top	control	or	the	 AUTO	SET	
    button	on	the	remote	control.
    Off	.......Disables	Auto	Keystone.
    Auto setup
    Note:
    	
    •	While	Input search	is	set	to	On1	or	On2,	the	status	of	Input	
    and	Lamp	are	displayed	every	time	the	signal	is	switched.
    	 •	Only	the	last	selected	input	source	can	be	detected.
    	 •	During	Input search	is	in	progress,	If	the	MENU	button	or	
    the	ON/STAND-BY 	button	is	pressed,	Input search	will	stop.	
    If	the	COMPUTER	1/2	button	or	VIDEO	or	COMPONENT 	or	
    S-VIDEO	button	is	pressed,	Input search	will	stop	and	go	
    back	to	the	button's	input	signal.	
    	 •	Input search,	Auto PC adj .	and	Auto Keystone	cannot	be	
    set	Off	at	the	same	time.	
    This	function	enables	Input	search,	 Auto	Keystone	correction	
    and	Auto	PC	adjustment	by	pressing	the	 AUTO	SETUP	button	
    on	the	top	control	or	the	 AUTO	SET	button	on	the	remote	
    control.	Settings	for	those	functions	can	be	altered	as	follows:	 
    						
    							45
    Setting
    Keystone
    This	function	is	used	to	store	or	reset	the	keystone	
    correction	when	the	AC	power	cord	is	unplugged.	
    	Store	.......	Keep 	the 	keystone 	correction 	even 	when 	the	
    AC	power	cord	is	unplugged.
    	 Reset	.......	Release	 the	keystone	 correction	 when	the	AC	
    power	cord	is	unplugged.
    To	correct	keystone	distortion,	press	the	SELECT 	button.	
    Keystone	appears	on	the	screen.	Use	the	Point	▲▼	buttons	
    to	correct	keystone	distortion	(p.23).
    Background
    Select	the	background	screen	for	when	no	input	signal	is	
    detected.	Press	the	Point	▲▼	buttons	to	switch	between	
    each	option.
    	Blue	...	 Project	a	blue	background
    	User...	 Project	an	image	selected	in	the	Logo	setting.
    	Black	. .	 Project	a	black	background
    This	function	decides	whether	to	display	On-Screen	
    Displays.
     On	...........................	Show	 all	the	 On-Screen	 displays.	Use	
    this	function	 when	you	want	 to	project	
    images	 after	the	lamp	 becomes	 bright	
    enough.	The	factory	 default	 setting	is	
    in	this	option.
    	Countdown Off .......	S h o w	t h e 	i n p u t 	i m a g e 	i n s t e a d 	o f	
    the 	countdown 	when 	turning 	on 	the	
    projector.	 Use	this	function	 when	you	
    want	to	project	 the	image	 as	early	 as	
    possible 	even 	when 	the 	lamp 	is 	not	
    bright	enough.
    	 Off	...........................	Hide	the	On-Screen	Displays	except;
    		 ●	On-Screen	Menu.
    		●	Power off?	(p.20)
    		●	P-Timer	display.	(p.26)
    		●	No signal	for	Power	management		
    			(p.50)
    		 ●	Please wait  . . .
    		●	Arrows	for	the	 True	function	in	the		
    				 			Screen	Menu.	(p.34)
    Display
    Keystone 
    						
    							46
    Setting
    Logo (Logo and Logo PIN code lock settings)
    Logo selectThis	function	allows	you	to	customize	the	screen	logo	with	
    Logo select,	capture,	Logo PIN code lock	and	Logo PIN 
    code change
    	functions.
    Note:
    	 		When	On	is	selected	in	the	Logo	PIN	code	lock	function,	
    Logo select	and	Capture	functions	cannot	be	selected.
    Logo select
    This	function	decides	on	the	starting-up	display	from	
    among	following	options.	
    	User	........	Show	the	image	you	captured.		
    	 Default	....	Show	the	factory-set	logo.	
    	 Off	...........	Show	the	countdown	display	only.
    Off
    Off 
    						
    							47
    Setting
    Capture
    Capture
    This	function	enables	you	to	capture	an	image	being	
    projected	to	use	it	for	a	starting-up	display	or	interval	of	
    presentations.
    Select	Capture	and	press	the	SELECT	button.		
    A	confirmation	box	appears	and	select	yes	to	capture	the	
    projected	image.
    After 	capturing 	the 	projected 	image, 	go 	to 	the 	Logo 	select	
    function	 and	set	it	to	User.	Then	 the	captured	 image	will	be	
    displayed	the	next	time	you	turn	on	the	projector.
    To	cancel	the	capture	function,	select	yes	in	the	"Quit?"	
    confirmation	box.
    Note:
    	 •	Before 	capturing 	an 	image, 	select 	Standard	in 	the	
    Image 	select 	Menu 	to 	capture 	a 	proper 	image 	(pp.32,	
    39).
    	 •	A 	signal 	from 	a 	computer 	can 	be 	captured 	up 	to 	XGA 	
    (1024 	x 	768). 	A 	signal 	from 	video 	equipment 	can 	be	
    captured	except	for	720p,	1035i,	and	1080i.
    	 •	When 	capturing 	the 	image 	that 	has 	been 	adjusted 	by	
    the	 Keystone	 function,	the	adjusted	 data	is	automatically	
    reset 	and 	the 	projector 	captures 	an 	image 	without	
    keystone	correction.	
    	 •	When	Logo PIN code lock	is	 set	 to	On,	capture	cannot	
    be	selected.			
    	 •	When 	starting 	to 	capture 	a 	new 	image, 	the 	previously	
    stored	image	is	cleared	even	if	you	cancel	the	capturing.
    		•	When 	there 	is 	no 	captured 	image 	or 	it 	is 	interrupted	
    while	 capturing	 an	image,	User	cannot	 be	selected,	 you	
    can	only	switch	between	Default	and	Off.
    Logo PIN code lock
    This	function	prevents	an	unauthorized	person	from	
    changing	the	screen	logo.
    	Off	...........	The	screen	logo	can	be	changed	freely	from	
    the	Logo	Menu	(p.46).
    	 On	...........	The	screen	logo	cannot	be	changed	without	a 	
    Logo	PIN	code.
    If	you	want	to	change	the	Logo PIN code lock	setting,	
    press	the	SELECT	button	and	the	Logo	PIN	code	dialog	
    box	appears.	Enter	a	Logo	PIN	code	by	following	the	steps	
    below.	The	initial	Logo PIN code	is	set	to	“4321”	at	the	
    factory.
    Logo PIN code lock
    Off
    Quit?
    Off
    Quit? 
    						
    							48
    Setting
    Enter a Logo PIN code
    Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	
    Point	◄►	buttons	to	fix	the	number	and	move	the	red	
    frame	pointer	to	the	next	box.	The	number	changes	to	
    .	If	you	fixed	an	incorrect	number,	use	the	Point	◄►	
    buttons	to	move	the	pointer	to	the	number	you	want	to	
    correct,	and	then	enter	the	correct	number.
    Repeat	this	step	to	complete	entering	a	four-digit	
    number.
    After	entering	 the	four-digit	 number,	move	the	pointer	 to	
    Set.	Press	 the	SELECT 	button	 so	that	 you	can	start	 to	
    operate	the	projector.
    If	you	entered	an	incorrect	Logo	PIN	code,	Logo PIN 
    code
    	and	the	number	()	will	turn	red	for	a	
    moment.	Enter	the	correct	Logo	PIN	code	all	over	again.
    Logo PIN code change
    Logo	PIN	code	can	be	changed	to	your	desired	four-digit	
    number.	Press	the	SELECT 	button	to	select	Logo PIN 
    code change
    .	Logo PIN code dialog	box	appears,	use	
    the	Point	▲▼buttons	to	enter	the	correct	code.	 The	New	
    Logo	PIN	code	input	dialog	box	appears.	Set	a	new	Logo	
    PIN	code,	confirmation	box	appears,	choose	yes	to	set	
    the	new	Logo	PIN	code.
    Be	sure	to	note	the	new	Logo	PIN	code	and	keep	it	on	
    hand.	If	you	lost	the	number,	you	could	no	longer	change	
    the	Logo	PIN	code	setting.	
    Use	 the	Point	▲▼	buttons	 to	switch	On	or	Off,	 and	 then	
    press	the	SELECT 	button	to	make	a	chioce.
    Change the Logo PIN code lock setting
    Enter a Logo PIN code
    After	a	correct	Logo	PIN	code	
    is	entered,	the	following	dialog	
    box	appears.
    CAUTION:
    wHEN yOU HAVE CHANGED THE LOGO PIN CODE, 
    wRITE DOwN THE NEw PIN CODE IN COLUMN OF 
    THE LOGO PIN CODE NO . MEMO ON PAGE 75,  AND 
    KEEP IT SECUREL y . SHOULD THE LOGO PIN CODE 
    BE LOST OR FORGOTTEN, THE LOGO PIN CODE 
    SETTING CAN NO LONGER BE CHANGED .
    Change the Logo PIN code lock setting
    Change the Logo PIN code
    Next
    ----
    Off
    Select 
    						
    							49
    Setting
    Ceiling 
    Rear 
    Ceiling
    When	this	function	 is	set	 to	On,	the	 picture	 will	be	top/
    bottom 	and 	left/right 	reversed. 	This 	function 	is 	used 	to	
    project	the	image	from	a	ceiling-mounted	projector.
    Rear
    When	 this	function	 is	set	 to	On,	the	 picture	 will	be	left/right	
    reversed. 	This 	function 	is 	used 	to 	project 	the 	image 	from	
    rear	of	the	screen.
    Terminal
    TerminalThe	
    COMPUTER	 IN	2/MONITOR	 OUT	terminal	 on	the	 back	
    of	the	 projector	 is	switchable	 for	computer	 input	or	monitor	
    output.	 (See	page	 9)	 	Select	Computer  2	or	Monitor  Out	
    with	the	Point	▲▼	buttons.
    	 Computer 2..	computer	input
    	Monitor Out..	monitor	out
    Terminal	 function	is	not	 available	 when	selecting	Computer 
    2
    	 to	 the	 input	 source.		 Change	the	input	 source	 to	the	 others	
    (Computer  1, and	 so	on)	 so	that	 the	Terminal	 function	will	
    be	available.	(pp.25,	36,	37) 
    						
    							50
    Setting
    Power management
    Time	left	before	Lamp	is	off.
    Power management
    For	reducing	power	consumption	as	well	as	maintaining	
    the	lamp	life,	the	Power	management	function	turns	off	the	
    projection	lamp	when	the	projector	is	not	operated	for	a	
    certain	period.
    Select	one	of	the	following	options:
    Ready	...............	 When	the	lamp	has	been	fully	cooled	
    down,	the	POWER	indicator	changes	
    to	green	blinking.	In	this	condition,	
    the	projection	lamp	will	be	turned	on	if	
    the	input	signal	is	reconnected	or	any	
    button	on	the	top	control	or	remote	
    control	is	pressed.	
    Shut down	 .......	 When	the	lamp	has	been	fully	cooled	
    down,	the	power	will	be	turned	off.	
    Off	 ....................	 Power	management	function	is	off.	
    Timer	................	 If	the	input	signal	is	interrupted	and	
    no	button	is	pressed	for	more	than	
    30	seconds,	the	timer	display	with	
    No signal	appears.	It	starts	the	
    countdown	until	the	lamp	is	turned	off.	
    Use	the	Point	▲▼	buttons	to	set	the	
    Timer(1~30min).
    Note:
    	 	Factory	default	is	Ready: 5 min.
    On start
    When	this	function	is	set	to	On,	the	projector	will	be	
    automatically	turned	on	just	by	connecting	the	 AC	power	
    cord	to	a	wall	outlet.	
    Note:
    •	When	Standby mode	is	set	to	Eco,	On start	cannot	be	
    	 selected.	If	you	want	to	set	On start to	On,	Standby 
    	 mode 
    must	be	set	to	Network.
    •	Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	
    	 the	Projector”	on	page	20).	If	the	projector	is	turned	off	in	
    	 the	incorrect	sequence,	the	On	start	function	will	not	
    	 work	properly. 
    						
    All Eiki manuals Comments (0)

    Related Manuals for Eiki Lc-Xbl25 Multimedia Projector Owners Manual