Eiki Lc-Xb41 Multimedia Projector Owners Manual

41
Video Input
This projector has the picture screen resize function, which enables you\
 to customize the image size.Wide Normal
Screen Size Adjustment
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.Scale H/V............ Adjust the Horizontal/Vertical screen scale.
H&V.................... When set to “On,” the aspect ratio is fixed. The “Scale V”...

42
Display Blue back
Press the Point7 8buttons to switch On/Off.  When this
function is “On,” a blue image is displayed while the input
signal is not detected. 
Keystone
Press the MENU button to display the On-Screen
Menu.  Press the Point
7 8buttons to move the red
frame pointer to the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean,...

43
Setting
Capture
This function enables you to capture the image being
projected and use it for a start-up display or interval of
presentations.  
After capturing the projected image, go to the Logo
select function and set it to “User”.  Then the captured
image will be displayed when turning on the projector
next time or pressing the NO SHOW button.  (p.25) 
To capture the image, select [Yes].  To cancel the
Capture function, select [No].  
✔Notes:
• Before capturing an image, select Standard in the...

44
Setting
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.Off............ The screen logo can be changed freely from the Logo Menu (p.43).
On ............ The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321”
at the factory. Logo PIN code...

45
Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture will be
top/bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.Rear
When this function is set to “On,” the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Input search
This function detects the input signal automatically. When a
signal is found, the search will stop. Use the Point 
7 8
buttons to select one of...

46
Setting
On start
When this function is “On”, the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:Be sure to turn the projector off properly (see “Turning Off the 
Projector” on page 20).  If the projector is turned off in the incor\
rect
sequence, the On start function does not operate properly.
Lamp control
This function allows you to change brightness of the screen.
Auto ........... The brightness according to the input signal (between High and...

47
Setting
Key lock
If the top control accidentally becomes locked and you
do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.Key lock
Select Key lock.  Choose one
of the alternatives with the
Point 
edbuttons and select
[Yes] to activate it.
Security (Key lock and PIN code lock settings)
This function allows you to use Key lock and PIN code
lock function to set the security for the...

48
Setting
Change the PIN code lock setting
Use the Point 7 8buttons to
switch between the options.
Use the Point 7 8button to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point 
dbutton.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting Enter a PIN code
Use the Point edbuttons to enter a number. Press the
Point 
8button to fix the number and move the red frame
pointer to the next box. The number changes to “ ✳.” If
you fixed an incorrect number,...

49
Setting
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.20).L1 ....... Normal operation
L2 ....... Slower and lower-sound than the normal operation (L1), but it takes more time to cool the projector
down.
Fan
Choose the running speed of cooling fans from the following
options.
Normal ..... Normal speed
Max .......... Faster than the normal speed. Fan control
Fan
Warning log
This function records anomalous operations while the
projector is...

50
Setting
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Exit the Setting Menu.
QuitSelect Factory default and this
box appears. Select [Yes], and
the next box appears. Select [Yes] to
activate it.
Factory default
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon...