Eiki Lc-Xb40n Multimedia Projector Owners Manual

							MULTIMEDIA PROJECTOR
MODELLC-XB40N
OWNER’S MANUAL
Network Supported
❏ Wireless LAN
IEEE802.11b/g
❏ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏USB Memory Viewer (optionally available)
Compatible with a dedicated USB memory
✽ Refer to the owner’s manuals below for details
about network and memory viewer function. ■ Network Set-up and Operation
■ Owners Manual  USB Memory 
This manual is provided with optionally 
supplied USB memory (Model: WL-10). 
						

							2 
						

							3
Features and Design
◆Compact Design
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
◆Capable of 360-degree Projection
This projector is capable of 360-degree projection.
*Some restriction required, see page 8.
◆Antitheft Alarm Function
This projector is equipped with an Antitheft alarm
function which sounds when vibration is detected
(pp.58–61). A built-in rechargeable battery is used for
the alarm.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.32). Up to
UXGA resolution can be accepted.
◆Useful Functions for Presentations
- The digital zoom function allows you to focus on the
crucial information during a presentation (p.39).
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.36, 43).
◆P ow er Management
The Power management function reduces power
consumption and maintains the lamp life (p.52).
◆Lamp Control
Brightness of the projection lamp can be selected
(pp.28, 53).
◆Logo Function
The Logo function allows you to customize the screen
logo (pp.49–50). You can capture an image for the
screen logo and use it for the starting-up display or
between presentations.
◆Multilanguage Menu Display
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese (p.47).
◆Security Function
The Security function helps you to ensure security of
the projector. With the Key lock function, you can lock
the operation on the top control or remote control
(p.54). PIN code lock functions prevents unauthorized
use of the projector (pp.22, 54–55).
◆Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
◆LAN Network Function 
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a
computer as well as operate and manage the projector
via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
◆Memory Viewer Function (Optional Function)
Insert the dedicated USB memory (optionally supplied:
WL-10) into the projector to project images or
presentation data stored within. You do not have to
carry computers or other equipment for a presentation
*
For details, refer to the owner’s manual provided with
optionally supplied USB memory.
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display
(LCD) technology.
✔Notes:
• The On-Screen Menu and figures in this manual may differ slightly from t\
he product.
• The contents of this manual are subject to change without notice. 
						

							4
Table of Contents
Trademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective
corporation.
F eatures and Design  . . . . . . . . . . . . . . . .3
T able of Contents  . . . . . . . . . . . . . . . . . .4
To  the Owner  . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions  . . . . . . . . . . . . . . . . .6
Air Circulation 7
Moving the Projector 7
Installing the Projector in Proper Directions 8
Compliance  . . . . . . . . . . . . . . . . . . . . . . .9
Pa rt Names and Functions  . . . . . . . . . .10
Front 10
Back 10
Bottom 10
Rear Terminal 11
Top Control 12
Remote Control 13
Laser Pointer Function 14
Pointer Function 14
Wireless Mouse Operation 15
Remote Control Code 15
Remote Control Battery Installation 16
Remote Control Operating Range 16
Adjustable Feet 16
Installation  . . . . . . . . . . . . . . . . . . . . . . .17
Positioning the Projector 17
Connecting the AC Power Cord 18
Connecting to a Computer 19
Connecting to Video Equipment 20
Connecting to Component Video Equipment 21
Basic Operation  . . . . . . . . . . . . . . . . . . .22
Turning On the Projector 22
Turning Off the Projector 23
How to Operate the On-Screen Menu 24
Menu Bar 25
Zoom and Focus Adjustment 26
Auto Setup Function 26
Keystone Correction 26
Sound Adjustment 27
Remote Control Operation 28
Computer Input   . . . . . . . . . . . . . . . . . .30
Input Source Selection 
(RGB: Computer 1 (Analog)/Computer 2 ) 30
Input Source Selection 
(RGB (PC digital), RGB (AV HDCP)) 31
Computer System Selection 32
Auto PC Adjustment 33
Manual PC Adjustment 34
Image Mode Selection  36
Image Adjustment 37
Screen Size Adjustment 38
Video Input  . . . . . . . . . . . . . . . . . . . . . .40
Input Source Selection (Video, S-video) 40
Input Source Selection 
(Component, RGB Scart 21-pin) 41
Video System Selection 42
Image Mode Selection  43
Image Adjustment 44
Screen Size Adjustment 46
Setting  . . . . . . . . . . . . . . . . . . . . . . . . . .47
Setting 47
Antitheft Alarm Function  . . . . . . . . . . .58
How to Use the Antitheft Alarm Function 58
Maintenance and Cleaning  . . . . . . . . . .62
Warning Indicator 62
Cleaning the Filter 63
Resetting the Filter Counter 63
Slide Shutter 64
Cleaning the Projection Lens 64
Cleaning the Projector Cabinet 64
Lamp Replacement 65
Resetting the Lamp Counter 66
Appendix  . . . . . . . . . . . . . . . . . . . . . . . .67
Troubleshooting 67
Menu Tree 69
Indicators and Projector Condition 71
Compatible Computer Specifications 72
Technical Specifications 74
Optional Parts 75
PJ Link Notice 76
Configurations of Terminals 77
PIN Code Number Memo 78 
						

							5
To the Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCKDO NOT OPEN
Before installing and operating this projector, read this
manual thoroughly.
This projector provides many convenient features and
functions. Operating the projector properly enables you
to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening
the product-life, but also malfunctions, fire hazard, or
other accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section in
the back of this booklet. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.Safety Precaution
WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
–This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children
do not stare directly into the beam.
– Install the projector in a proper position. Otherwise it
may result in fire hazard.
– Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper air
circulation and cooling of the unit. The dimension
shown here indicate the minimum space required. If the
projector is to be built into a compartment or similarly
enclosed, these minimum distances must be
maintained.
– Do not cover the ventilation slot on the projector. Heat
build-up can reduce the service life of your projector,
and can also be dangerous.
– If the projector is unused for an extended time, unplug
the projector from the power outlet.
0.7 (20 cm)
1.5 (50 cm) 3 (1 m)
1.5 (50 cm)
SIDE and TOPREAR
NOTE:This symbol and recycle system are applied only to EU
countries and not applied to the countries in the other
area of the world.
Your EIKI product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-
life, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in! 
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard for
Protection of Electronic Computer/Data Processing
Equipment 
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceil-
ing, clean air intake vents, filters, or top of
the projector periodically with a vacuum
cleaner. If you leave the projector unclean
for a long time, the cooling fans can be
clogged with dust, and it may cause a
breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER. IF THE PROJECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
READ AND KEEP THIS OWNERS MANUAL FOR
LATER USE. 
						

							6
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation of
the equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed near
or over a radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.Do not install the projector near the ventilation duct of air-
conditioning equipment.
This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything
to rest on the power cord. Do not locate this projector
where the cord may be damaged by persons walking on
it.
Do not attempt to service this projector yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Unplug this projector from wall outlet and refer servicing
to qualified service personnel under the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or the cabinet has been damaged.
f. When the projector exhibits a distinct change in performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe
operating condition.
V oor de klanten in Nederland
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
NL 
						

							7
Safety Instructions
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered. 
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken. 
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
–  Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will
become hot while the projector is being used.
–  Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Air Intake
Vents
Exhaust Vent
Exhaust Vent
(Hot air exhaust)Air Intake Vent
CAUTION IN CARRYING OR TRANSPORTING 
THE PROJECTOR
– Do not drop or bump the projector, otherwise damages
or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before the projector is
cooled enough.
Moving the Projector
When moving the projector, close the slide shutter and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into the supplied carrying case with the lens side up.
CAUTION
The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet, and
it is not designed to protect an appliance from external
forces. Do not transport the projector by courier or any
other transport service with this case, otherwise the
projector can be damaged. When handling the projector,
do not drop, bump, subject it to strong forces, or put
other things on the cabinet.  
Air Circulation 
						

							8
Safety Instructions
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, pe\
rpendicular to the plane of the screen
as shown in the figure below.
Bottom
Downward (Usual)Front
DownwardBottom
UpwardFront
Upward
Installing the Projector in Proper Directions
Avoid positioning the projector as described below when installing.
P ositioning Precautions
Do not tilt the projector more than 20 degrees from side to side. 
Do not put the projector on either side to project an image. 
20˚
20˚
10˚ 10˚
10˚ 10˚
In upward projection, do not tilt the projector over 10 degrees right an\
d left.
In downward projection, do not tilt the projector over 10 degrees right \
and left. 
						

							9
Compliance
The AC Power Cord supplied with this projector meets the requirement for\
 use in the country you purchased it.  
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety featur\
e to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature\
.  Should you be unable to insert
the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCE\
SSIBLE.
AC Power Cord Requirement
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a\
 Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection ag\
ainst harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio freq\
uency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radi\
o communications. However, there is no guarantee
that interference will not occur in a particular installation. If this e\
quipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o\
ff and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving  antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to\
 which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpa\
rt B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwi\
se specified in the instructions. If such changes
or modifications should be made, you could be required to stop operation\
 of the equipment.
Model Number(s)  : LC-XB40N
Trade Name  : EIKI
Responsible party  : EIKI International, Inc. 
Address  : 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A.
Telephone No. : 800-242-3454 (949-457-0200) 
						

							10
Bottom Back
qZoom Ring
w Infrared Remote Receiver
e Focus Ring
r Projection Lens
t Slide Shutter Lever
y Top Controls and Indicators
u Exhaust Vent
i
!6
!3
!5!4
!1!2
CAUTION
Hot air is exhausted from the exhaust
vents. Do not put heat-sensitive objects
near this side.
uerty
Fr ont
Pa rt Names and Functions
! 7
!0o
qw
✔Note:
• ! 2USB Terminal and  !3LAN Connection
Terminal are for the Network function. Refer
to the owner’s manual “Network Set-up and
Operation” and owner’s manual of Memory
viewer (optionally available).
u
oo
! 6
i Speaker
o Air Intake Vents
! 0Terminals and Connectors
! 1Power Cord Connector
! 2USB Terminal
! 3LAN Connection Terminal
! 4Lamp Cover
! 5Air Filter
! 6Adjustable Feet
! 7Battery Cover
✽ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO Brands 
Corporation.
✽