Eiki Eip-4500 Dlp Projector Setup Guide
Here you can view all the pages of manual Eiki Eip-4500 Dlp Projector Setup Guide. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Controlling the Projector Using RS-232C or Telnet
View Setting Detail List
([V]View All Setting)
1 11 1
1Enter “v” and press the “Enter” key.
Display all setting values(*).
Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the
details to be set. Setting is carried out one item at a time, and saved at the end.
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-30.png "Page 31
31
Controlling the Projector Using RS-232C or Telnet
View Setting Detail List
([V]View All Setting)
1 11 1
1Enter “v” and press the “Enter” key.
Display all setting values(*).
Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the
details to be set. Setting is carried out one item at a time, and saved at the end.
▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name...")
31 Controlling the Projector Using RS-232C or Telnet View Setting Detail List ([V]View All Setting) 1 11 1 1Enter “v” and press the “Enter” key. Display all setting values(*). Enter number or symbol of item to be selected on the SETUP MENU. When setting, input the details to be set. Setting is carried out one item at a time, and saved at the end. ▼SETUP MENU ---------------------------------SETUP MENU-------------------------------- [1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name...
Page 32
![Page 32
32
Controlling the Projector Using RS-232C or Telnet
Save Settings and Quit
([S]Save & Quit)
Save set values and quit menu.
1 11 1
1Enter “s” and press the “Enter” key.
2 22 2
2Enter “y” and press the “Enter” key. ▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name
[A]Advanced Setup [D]Disconnect All
[V]View All Setting [S]Save & Quit [Q]Quit Unchanged...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-31.png "Page 32
32
Controlling the Projector Using RS-232C or Telnet
Save Settings and Quit
([S]Save & Quit)
Save set values and quit menu.
1 11 1
1Enter “s” and press the “Enter” key.
2 22 2
2Enter “y” and press the “Enter” key. ▼SETUP MENU
---------------------------------SETUP MENU--------------------------------
[1]IP Address [2]Subnet Mask [3]Default Gateway
[4]User Name [5]Password
[6]RS-232C Baud Rate [7]Projector Name
[A]Advanced Setup [D]Disconnect All
[V]View All Setting [S]Save & Quit [Q]Quit Unchanged...")
32 Controlling the Projector Using RS-232C or Telnet Save Settings and Quit ([S]Save & Quit) Save set values and quit menu. 1 11 1 1Enter “s” and press the “Enter” key. 2 22 2 2Enter “y” and press the “Enter” key. ▼SETUP MENU ---------------------------------SETUP MENU-------------------------------- [1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged...
Page 33
![Page 33
33
Controlling the Projector Using RS-232C or Telnet
IP Address Setting
([1]IP Address)
Setting of IP address.
1 11 1
1Enter “1” and press the “Enter” key.
2 22 2
2Enter numerical value to be set and press the
“Enter” key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
1 11 1
1Enter “2” and press the “Enter” key.
2 22 2
2Enter numerical value to be set and press the
“Enter” key.
Display subnet mask after change (*).
The setting procedure for each item will...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-32.png "Page 33
33
Controlling the Projector Using RS-232C or Telnet
IP Address Setting
([1]IP Address)
Setting of IP address.
1 11 1
1Enter “1” and press the “Enter” key.
2 22 2
2Enter numerical value to be set and press the
“Enter” key.
Display IP address after change (*).
Subnet Mask Setting
([2]Subnet Mask)
Setting subnet mask.
1 11 1
1Enter “2” and press the “Enter” key.
2 22 2
2Enter numerical value to be set and press the
“Enter” key.
Display subnet mask after change (*).
The setting procedure for each item will...")
33 Controlling the Projector Using RS-232C or Telnet IP Address Setting ([1]IP Address) Setting of IP address. 1 11 1 1Enter “1” and press the “Enter” key. 2 22 2 2Enter numerical value to be set and press the “Enter” key. Display IP address after change (*). Subnet Mask Setting ([2]Subnet Mask) Setting subnet mask. 1 11 1 1Enter “2” and press the “Enter” key. 2 22 2 2Enter numerical value to be set and press the “Enter” key. Display subnet mask after change (*). The setting procedure for each item will...
Page 34
![Page 34
34
Controlling the Projector Using RS-232C or Telnet
User Name Setting
([4]User Name)
Carrying out security protection using user name.
1 11 1
1Enter “4” and press the “Enter” key.
2 22 2
2Enter user name and press the “Enter” key.
Display set user name (*).
Note
•User name can be up to 8 characters.
•You can input the characters below :
a-z, A-Z, 0-9, -, _
•In the default state, user name is not set.
Password Setting
([5]Password)
Carrying out security protection using password.
1 11 1
1Enter “5” and...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-33.png "Page 34
34
Controlling the Projector Using RS-232C or Telnet
User Name Setting
([4]User Name)
Carrying out security protection using user name.
1 11 1
1Enter “4” and press the “Enter” key.
2 22 2
2Enter user name and press the “Enter” key.
Display set user name (*).
Note
•User name can be up to 8 characters.
•You can input the characters below :
a-z, A-Z, 0-9, -, _
•In the default state, user name is not set.
Password Setting
([5]Password)
Carrying out security protection using password.
1 11 1
1Enter “5” and...")
34 Controlling the Projector Using RS-232C or Telnet User Name Setting ([4]User Name) Carrying out security protection using user name. 1 11 1 1Enter “4” and press the “Enter” key. 2 22 2 2Enter user name and press the “Enter” key. Display set user name (*). Note •User name can be up to 8 characters. •You can input the characters below : a-z, A-Z, 0-9, -, _ •In the default state, user name is not set. Password Setting ([5]Password) Carrying out security protection using password. 1 11 1 1Enter “5” and...
Page 35
![Page 35
35
Controlling the Projector Using RS-232C or Telnet
Disconnecting All Connec-
tions ([D]Disconnect All)
It is possible to disconnect all the TCP/IP connec-
tions currently recognized by the projector. Even if
the COM Redirect port is fixed in the Busy status
due to a problem, it is possible to force the Ready
status back by carrying out this disconnection.
1 11 1
1Enter “d” and press the “Enter” key.
2 22 2
2Enter “y” and press the “Enter” key.
Note
•If Disconnect All is performed, the connection to
the...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-34.png "Page 35
35
Controlling the Projector Using RS-232C or Telnet
Disconnecting All Connec-
tions ([D]Disconnect All)
It is possible to disconnect all the TCP/IP connec-
tions currently recognized by the projector. Even if
the COM Redirect port is fixed in the Busy status
due to a problem, it is possible to force the Ready
status back by carrying out this disconnection.
1 11 1
1Enter “d” and press the “Enter” key.
2 22 2
2Enter “y” and press the “Enter” key.
Note
•If Disconnect All is performed, the connection to
the...")
35 Controlling the Projector Using RS-232C or Telnet Disconnecting All Connec- tions ([D]Disconnect All) It is possible to disconnect all the TCP/IP connec- tions currently recognized by the projector. Even if the COM Redirect port is fixed in the Busy status due to a problem, it is possible to force the Ready status back by carrying out this disconnection. 1 11 1 1Enter “d” and press the “Enter” key. 2 22 2 2Enter “y” and press the “Enter” key. Note •If Disconnect All is performed, the connection to the...
Page 36
![Page 36
36
Controlling the Projector Using RS-232C or Telnet
Carrying out Network Ping
Test
(ADVANCED[5]Network Ping Test)
It is possible to confirm that a network connection
between the projector and a computer etc. is work-
ing normally.
1 11 1
1Enter “5” and press the “Enter” key.
2 22 2
2Enter IP address of device to be tested and
press the “Enter” key.
Display entered IP address (*1).
Display test result (*2).
Note
•If the “Enter” key is pressed without entering an
IP address, the Ping destination IP...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-35.png "Page 36
36
Controlling the Projector Using RS-232C or Telnet
Carrying out Network Ping
Test
(ADVANCED[5]Network Ping Test)
It is possible to confirm that a network connection
between the projector and a computer etc. is work-
ing normally.
1 11 1
1Enter “5” and press the “Enter” key.
2 22 2
2Enter IP address of device to be tested and
press the “Enter” key.
Display entered IP address (*1).
Display test result (*2).
Note
•If the “Enter” key is pressed without entering an
IP address, the Ping destination IP...")
36 Controlling the Projector Using RS-232C or Telnet Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) It is possible to confirm that a network connection between the projector and a computer etc. is work- ing normally. 1 11 1 1Enter “5” and press the “Enter” key. 2 22 2 2Enter IP address of device to be tested and press the “Enter” key. Display entered IP address (*1). Display test result (*2). Note •If the “Enter” key is pressed without entering an IP address, the Ping destination IP...
Page 37
![Page 37
37
Controlling the Projector Using RS-232C or Telnet
Setting of Search Port
(ADVANCED[0]Search Port)
Sets the port number used when searching for the
projector from the network.
1 11 1
1Enter “0” and press the “Enter” key.
2 22 2
2Enter numerical value and press the “Enter” key.
Display set numerical value (*).
Note
•Set according to need. Normally, use with the fac-
tory default setting.
Return to Default Settings
(ADVANCED[!]Restore Default
Setting)
Returns all menu setting values to the default...](http://img.usermanuals.tech/thumb/1702/88923/w300_eiki-eip-4500-manual_d-36.png "Page 37
37
Controlling the Projector Using RS-232C or Telnet
Setting of Search Port
(ADVANCED[0]Search Port)
Sets the port number used when searching for the
projector from the network.
1 11 1
1Enter “0” and press the “Enter” key.
2 22 2
2Enter numerical value and press the “Enter” key.
Display set numerical value (*).
Note
•Set according to need. Normally, use with the fac-
tory default setting.
Return to Default Settings
(ADVANCED[!]Restore Default
Setting)
Returns all menu setting values to the default...")
37 Controlling the Projector Using RS-232C or Telnet Setting of Search Port (ADVANCED[0]Search Port) Sets the port number used when searching for the projector from the network. 1 11 1 1Enter “0” and press the “Enter” key. 2 22 2 2Enter numerical value and press the “Enter” key. Display set numerical value (*). Note •Set according to need. Normally, use with the fac- tory default setting. Return to Default Settings (ADVANCED[!]Restore Default Setting) Returns all menu setting values to the default...
Page 38
38 Stack Projection The stack projection allows you to increase the brightness of an image by stacking two projectors and projecting same image simultaneously. Info •To set up the stack projection, assign a projector as the master and the other projector as the slave and connect the projectors with commercially available LAN cables (UTP cable, Category 5, cross-over type). In this way, you can control the both projectors with one remote control. •The buttons below can control both the master and the...
Page 39
39 Stack Projection Setting up the Stack Projection Basic This part shows an example for setting up the stack projection of a computer image with two projectors. RGB cable RGB cableLAN cable (cross-over type) OUTPUT (FOR INPUT 1, 2) terminal INPUT 1 terminal INPUT 1 terminal LAN terminal LAN terminal Computer Projector 1: Master Projector 2: Slave Master Set Inputs ON OFF OFF OFF OFFON OFF OFF OFF OFFINPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Slave Set Inputs INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Projector 1...
Page 40
40 Stack Projection Video equipment Distributor RGB cable 5 BNC to 15-pin D-sub cable Composite video cableRGB cableLAN cable (cross-over type) Projector 1: Master Projector 2: SlaveOUTPUT (FOR INPUT 1, 2) terminal INPUT 1 terminal INPUT 1 terminal INPUT 2 terminals INPUT 4 terminal INPUT 4 terminal LAN terminal LAN terminal Computer Computer Master Set Inputs ON ON OFF ON OFF ON OFF OFF ON OFFINPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Slave Set Inputs INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Projector 1 Projector...