Eiki Eip-2500 Dlp Projector Owners Manual
Here you can view all the pages of manual Eiki Eip-2500 Dlp Projector Owners Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
57 INPUT 4 Sharp (30 – 30) INPUT 4 CLR Temp *2 INPUT 4 Bright Boost (0 – 2) INPUT 4 Progressive : 2D INPUT 4 Progressive : 3D INPUT 4 Progressive : Film Mode Clock (150 – 150) Phase (30 – 30) H-Position (150 – 150) V-Position (60 – 60) Fine Sync Adjustment Reset Auto Sync : Off Auto Sync : On Internal Speaker : Off Internal Speaker : On Image Shift (96 – 96 (EIP-2500) / 75 – 75 (EIP-200))OSD Display : Off OSD Display : On Video System Selection : AUTO Video System Selection : PAL Video...
Page 62
58 DTV •When this projector receives 640K350 VESA format VGA signals, “640K400” appears on the screen. •Optimum image quality will be achieved by matching your computer’s output resolution to the projector’s native resolution. (1024 x 768 for the EIP-2500 model OR 800 x 600 for the EIP-200 model). Computer Computer Compatibility Chart • Multiple signal support Horizontal Frequency: 15-70 kHz, Vertical Frequency: 45-85 Hz, Pixel Clock: 12-108 MHz Sync signal:Compatible with TTL level • Compatible with...
Page 63
59 Troubleshooting No picture and no sound or projector does not start. Sound is heard but no picture appears (or picture is dark). Color is faded or poor. Picture is blurred; noise appears. Picture appears but no sound is heard. An unusual sound is occasionally heard from the cabinet. Maintenance indicator on the projector illuminates or blinks in red.Problem Check • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. • The selected input mode is...
Page 64
60 Problem Picture is green on INPUT 1 (COMPONENT)/ INPUT 2 (COMPONENT). Picture is pink (no green) on INPUT 1 (RGB)/INPUT 2 (RGB). Picture is too bright and whitish. The cooling fan becomes noisy. The lamp does not light up even after the projector turns on. The lamp suddenly turns off during projection. The image sometimes flickers. The lamp needs much time to turn on. Picture is dark.Check • Change the input signal type setting. • When you cannot select an input signal type, select “Color is faded or...
Page 65
61 Specifications Projector EIP-2500/EIP-200 NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Single Chip Digital Micromirror Device TM (DMDTM) by Texas InstrumentsPanel size: [EIP-2500] 0.55" (14 mm), 1chip XGA DMD [EIP-200] 0.55" (14 mm), 1chip SVGA DMDNo. of dots: [EIP-2500] 786,432 dots (1,024 [H] × 768 [V]) [EIP-200] 480,000 dots (800 [H] × 600 [V]) 1–1.15 × zoom lens, F2.4–2.6, f = 19.0–21.9 mm 275 W DC lamp 15-pin...
Page 66
62 Dimensions Units: inches (mm) M4 M4 M4 M4 12 13/32 (315)3 1/16 (77.5) 2 19/32(65.5) 1 53/64(46.2) 3 5/32 (80) 1 55/64 (47) 2 7/8 (73) 2 61/64(75) 1 11/32 (33.8) 4 19/64 (109) 4 9/64 (105) 1 7/8 (47.5)4 7/64 (104) 7/16 (11)11 1/32 (280) 23/64 (9) 13/64 (5) 7/16 (11)
Page 67
63 3 RCA to 15-pin D-sub cable ......................... 24 AC socket ...................................................... 26 Accessories ................................................... 10 Adjustment buttons ........................................ 37 Adjust horizontal noise ........................... 36, 46 Adjust vertical noise ............................... 36, 46 Aspect ratio .................................................... 32 AUDIO INPUT terminal .................... 23, 24, 25 AUDIO...
Page 68
A-Key to better communications U.S.A.EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : [email protected] Deutschland & ÖsterreichEIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126-9371-14 E-Mail : [email protected] CanadaEIKI CANADA - Eiki International, Inc. P.O. Box 156, 310 First St. - Unit 2, Midland, ON, L4R 4K8, Canada Tel : 800-563-3454 (705)-527-4084 Fax...