Eiki Eip-25 Multimedia Projector Owners Manual

                        
20
7.4 Display (Video mode)  
 
 
 
Submenu options Description  Operation method 
Keystone Corrects a display image 
that is wider at the top or 
at the bottom. • Press

                        
21
7.5 Audio 
 
 
 
Submenu options Description or operation method 
Vo l u m e  • Press

                        
22
7.6 Management 
 
 
 
Submenu 
options Description Operation method 
OSD location Adjusts the position of the OSD 
within the display image. • Press

                        
23
Lamp Reset Resets the lamp timer after 
replacing the lamp module. • Press right button, then it 
will display the message 
stating “Press Auto/Enter 
button, reset the lamp 
timer” to confirm that the 
user has replaced the 
lamp. After replacing  the 
lamp, please press 
“Auto/Enter” button. Or 
otherwise, press “Menu” 
button or the “Esc” on 
remote control. 
Auto Adjust Automatically adjusts the display 
image to the ideal settings for the 
display source. • Select Yes,...

                        
24
7.7 Language  
Changes the language of the OSD menu. Choose between English, German, French, 
Italian, Spanish, Portuguese, Japanese, Traditional, Chinese, and Simple Chinese. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

                        
25
8. Maintenance and service  
Change the module lamp immediately when the lamp life reaches 1500 hrs to 
maintain the best projection image. 
 
 
8.1 Replacing the lamp module 
 
When the lamp is within 30 hours of maximum lamp life, projector will display a 
warning automatically stating, “Lamp has reached its end of life! Lamp 
replacement is suggested!”. When this message appears, please change the lamp 
immediately. 
 
To replace the lamp module: 
1. Turn off the projector...

                        
26
8.2 Cleaning the projector lens   
 
Please follow the following procedures to clean the projector lens: 
1 Pour out a little cleaner on a clean soft cloth. Do not use the cleaner with particle, 
the cleaner that contains solvent or other chemicals of poor quality, they may 
cause damage to the projector lens. 
2 Use the soft cloth to wipe the projector lens lightly according to the direction of a 
certain circling motion. 
3 After finish wiping, place the lens cap on when the...

                        
27
9. Appendix 
 
9.1 Common problems and solutions 
When you encounter problems while using the projector, please refer to the 
following contents: 
If the suggestions in the troubleshooting section does not correct the problem, 
please contact the local distributor or our customer service center.   
 
„No picture on the screen  
ÖMake sure that all components are connected correctly and securely in 
accordance to the connection method and line that is introduced in the previous...

                        
28 „The focus of display image is blurred   
 
ÖAdjust the focus ring on the projector. 
ÖMake sure the projection screen is 1.4 ~12 meters from the projector. 
 
 
„Projected colors don’t match the computer or video player’s colors   
 
ÖThis is a normal phenomenon; just adjust the brightness, color or contrast value 
in the menu. 
 
„When projector is connected to DVD, and the film aspect ratio is 16:9, the 
display image is distorted. 
 
ÖPlease adjust the image proportion of...

                        
29
9.2 The distance proportion between screen and projector 
(Based on Zoom Ratio 1.18:1, for reference only) 
 
 
 
 
 
Projection distance  1.45M 2M 4M 6M 12M 
Tele Projection screen size  30”  40”  80”  120”  240” 
Wide Projection screen size  35”  47”  94”  141”  283”