Eiki Eip-1000t Dlp Projector Owners Manual

18
Ceiling-mount Setup

It is recommended that you use the optional
EIKI ceiling-mount bracket for this installation.
Before mounting the projector, contact your
nearest EIKI Authorized Dealer or Service
Center to obtain the recommended ceiling-
mount bracket (sold separately).

Invert the image by setting “Ceiling + Front”
in “PRJ Mode”. See page 43 for use of this
function.
Setting up the Projector
Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen...

19
300
200
100
80
60
261´147
174´9887´4970´39
52´29
3410–404
(10.6 m – 12.3 m)233–2611
(7.1 m 
– 8.2 m)117–135
(3.5 m – 4.1 m)94–109
(2.8 m – 3.3 m)70–81
(2.1 m – 2.5 m)
Projection (PRJ) Mode
The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode
most appropriate for the projection setting in use. (You can set the PRJ mode in “SCR-ADJ” menu.
See page 43.)

Table mounted, front projection
Ceiling mounted, front projection
Menu item  “Front”

Table mounted, rear...

20
Setting up the Projector (Continued)
300
(762 cm)
270
(686 cm)
250
(635 cm)
200
(508 cm)
150
(381 cm)
100
(254 cm)
80
(203 cm)
70
(178 cm)
60
(152 cm)
40
(102 cm)261
(664 cm)
235
(598 cm)
218
(553 cm)
174
(443 cm)
131
(332 cm)
87
(221 cm)
70
(177 cm)
61
(155 cm)
52
(133 cm)
35
(89 cm)38 3/32
(97 cm)
34 9/32
(87 cm)
31 47/64
(81 cm)
25 25/64
(64 cm)
19 3/64
(48 cm)
12 45/64
(32 cm)
10 5/32
(26 cm)
8 57/64
(23 cm)
7 5/8
(19 cm)
5 5/64
(13 cm) 147
(374 cm)
132
(336 cm)
123
(311 cm)...

21
When using a normal screen (4:3) and projecting 16:9 image
300
(762 cm)
270
(686 cm)
250
(635 cm)
200
(508 cm)
150
(381 cm)
100
(254 cm)
80
(203 cm)
70
(178 cm)
60
(152 cm)
40
(102 cm)240
(610 cm)
216
(549 cm)
200
(508 cm)
160
(406 cm)
120
(305 cm)
80
(203 cm)
64
(163 cm)
56
(142 cm)
48
(122 cm)
32
(81 cm)34 31/32
(89 cm)
31 15/32
(80 cm)
29 9/64
(74 cm)
23 5/16
(59 cm)
17 31/64
(44 cm)
11 21/32
(30 cm)
9 21/64
(24 cm)
8 5/32
(21 cm)
7
(18 cm)
4 
21/32
(12 cm) 180
(457 cm)
162
(411...

22
Samples of Cables for Connection
Cables for a camera
or a video game EquipmentInput
SignalCableTerminal on the
projector
S-video cable (commercially available)
Video cable (commercially available) Audio-visual
equipment
Camera/
video gameS-video
S-video Compo-
nent
video Video
Audio
Cables for a camera or a video game
ø3.5 mm minijack to RCA audio cable
(commercially available)INPUT3
INPUT4
AUDIO INPUT
INPUT1, 2
INPUT3
Video
AudioCables for a camera
or a video game
Cables for a camera or a video...

23
Connecting to Video Equipment
Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video...

24
L
R
To video output terminal
When connecting to equipment with video output terminal (INPUT4)
To audio
output terminal
Composite video cable
(commercially available) RCA audio cable*
(commercially available)To AUDIO (INPUT
3, 4) terminal To INPUT4
terminal
DVD, etc.
*Use the cable when you want
to enjoy the sound from the
projector’s speaker.
L
R
When connecting to equipment with S-video output terminal (INPUT3)
To S-video output terminal
To audio
output terminal
S-video cable
(commercially available)...

25
Connecting to a Computer
To RGB output terminal To audio output terminal
* ø3.5 mm stereo or
mono audio cable
(commercially
available)RGB Cable
(commercially available) When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
Ensure that you have read the owner’s manuals of the devices to be connected before making
connections.
* When using the ø3.5 mm mono audio cable, the volume level will be half of
when using the ø3.5 mm stereo audio cable....

26
To RGB
input
terminal
Note
Connecting to a Monitor with RGB Input Terminal
You can display computer images on both the projector and a separate monitor using two sets of
RGB cables.
To RGB
output
terminalTo INPUT 1
terminalTo OUTPUT
(INPUT 1, 2)
terminal
RGB cable (commercially available) RGB cable (commercially available)
• RGB signals and Component signals can be output to the monitor.
ComputerMonitor
EIP-1000T_EN_g05.7.13, 11:55 AM 26 

27
Note
Connecting to an Amplifier or Other Audio Equipment
The audio input from devices connected to the AUDIO INPUT terminals on the projector can be
output to audio equipment. The audio output is determined according to the selected input mode.
• ø3.5 mm minijack to RCA audio cable (commercially available) is required.
• Before connecting, ensure that both the projector and the audio equipment to be connected are
turned off.
• When turning off the projector while it is connected to audio equipment,...