Edimax Router BR-6315SRg User Manual

 
120 
Parameters   Description 
Status and 
Information Shows the router’s system information 
Internet 
Connection View the Broadband router’s Internet connection status 
and other related information 
Device Status  View the Broadband router’s current settings 
System Log  View the Broadband router’s system log 
Security Log  View any attempts that have been made to gain access to 
your network. 
Active DHCP 
Client View your LAN clients information that is currently linked to 
the broadband router...

 
121 
Parameters   Description 
Information You can see the router’s system information, such as the 
router’s LAN MAC address, WAN MAC address, 
hardware version, serial number, boot code version, 
runtime code version 
 
 
3.2 Internet Connection 
View the Broadband router’s current Internet connection status and other 
related information 
 
 
 
Parameters   Description 
Internet 
Connection This page displays the router’s WAN port information, 
including: WAN IP address, subnet mask, and ISP...

 
122 
3.3 Device Status 
View the broadband router’s current configuration settings. The device status 
displays the configuration settings you’ve configured in the Quick Setup 
Wizard/General Setup section. 
 
 
 
Parameters   Description 
Device Status This page shows the broadband router’s current device 
settings, including: broadband router LAN port’s current 
LAN IP address and subnet mask. It also shows whether 
the DHCP server function is enabled / disabled. 
  

 
123 
3.4 System Log 
View the operation log of the system. 
 
 
 
Parameters   Description 
System Log This page shows the system log of the broadband router. It 
displays any event occurred after system start up. 
At the bottom of the page, the system log can be saved 
 as a local file, you can clear the log by click 
 button, too. You can also click  button 
to get the most updated information. When the system is 
powered down, the system log will disappear if it’s not 
saved as a local file. 
  

 
124 
3.5 Security Log 
View any attempts that have been made to gain access to your network. 
 
 
 
Parameters   Description 
Security Log This page shows the current security log of the 
Broadband router. It displays all attempts tried to access 
your network. 
At the bottom of the page, the security log can be saved 
 as a local file, you can clear the log by clicking 
, too. You can also click  button to get 
the most updated information. When the system is 
powered down, the security log will...

 
125 
3.6 Active DHCP Client 
This page lists all DHCP clients. 
 
 
Parameters   Description 
Active DHCP 
Client This page shows all DHCP clients currently connected to 
your network. The “Active DHCP Client Table” displays the 
IP address and the MAC address and expiry time of each 
LAN Client. Use the Refresh button to get the most 
updated information. 
  

 
126 
3.7 Statistics 
View the statistics of packets sent and received on WAN, LAN and Wireless 
LAN interface. 
 
 
 
Parameters   Description 
Statistics  Shows the statistics of packets sent and received on WAN, 
LAN and Wireless LAN interface. 
  

 
127 
Chapter 4 
 
Tool 
This page includes basic configuration tools of this broadband router, such as 
Configuration Tools (save or restore configuration settings), Firmware Upgrade 
(upgrade system firmware) and Reset.   
 
 
 
Parameters   Description 
Configuration 
To o l s  You can save the router’s current configuration, restore 
the configuration from previously saved configuration files, 
and restore the router’s factory default settings 
Firmware 
Upgrade This page allows you to upgrade the...

 
128 
router through the Restore selection. If extreme problems occur you can use 
the Restore to Factory Defaults selection, this will set all configurations to its 
original default settings (e.g. when you purchased the router). 
 
 
Parameters   Description 
Configuration 
To o l s  Use the Backup tool to save the broadband router’s 
current configuration to a file named config.bin on your 
PC. You can then use the Restore tool to restore the 
saved configuration to the broadband router....

 
129 
 
 
 
Parameters   Description 
Firmware 
Upgrade This tool allows you to upgrade the broadband router’s 
system firmware. To upgrade the firmware of your 
broadband router, you need to download the firmware file to 
your local hard disk, and enter that file name and path in the 
appropriate field on this page. You can also click the 
browse button to locate the firmware file on your PC.   
 
 
After you selected the new firmware file, click  at the bottom of the 
screen to start the upgrade...