Edimax Router BR-6104K User Manual

4.2 Firmware Upgrade 
 
This page allows you to upgrade the router’s firmware 
 
  
Parameter Description 
Firmware Upgrade 
This tool allows you to upgrade the Broadband router’s system firmware. To upgrade the 
firmware of your Broadband router, you need to download the firmware file to your local 
hard disk, and enter that file na me and path in the appropriate field on this page. You can 
also use the Browse button to find the firmware file on your PC.
 
 
4.3 Reset 
 
You can reset the router’s...

Chapter 5  (For BR-6104KP only) 
 
5.1 Install Print Server Network Driver
 
1.  Execute Client.exe inside the CD\BR-6104KP folder and the “PrintServer Network driver Setup program” window will 
be displayed. 
 
  
2.  Click “Next” and specify the destination folder where the utility will be installed. 
 
  
3.  Click “Next” and specify the program fol der where the program icons will be added. 
 
 
42  

 
4.  Click “Next” to start installation. 
 
  
5.  In a while, the program will finish installing all the utilities and drivers. Thus far you have completed the installation 
phase and prepare to use the print server. 
 
  
6. Click “Continue ”, and all the print server’s network ports detected on the network will be added to your PC. 
 
  
7.  Finally, the “Installation complete” window is displayed to  indicate that the Client Installation procedure is finished. 
43  

5.2 Add a Network Printer
 
After installing the print server client tool, you can then perform the standard “Add Pr inter” procedure to add network printer 
to your PC. 
 
1.  Click “Start” button, choose “Setting  Î Printers”. 
2.  Double click “Add New Printer”. 
 
  
3.  Select “Local Printer” and click “Next”. 
 
  
4.  Select the suitable printer manufacturer and model, then click “Next”. 
 
 
44  

 
5.  Choose print server’s remote port which has been created in the previous client tools installation process and click 
“Next”. 
 
  
6.  Complete the rest of the questions to finish the network printer setup. 
 
45  

Appendix A  
 
How to Manually find your PC’s IP and MAC address 
 
1)  In Window’s open the Command Prompt program 
 
   
2) Type Ipconfig /all  and  
 
   
•  Your PC’s IP address is the one entitled  IP address (192.168.1.77) 
•  The router’s IP address is the one entitled  Default Gateway (192.168.1.254) 
•  Your PC’s MAC Address is the one entitled  Physical Address  (00-50-FC-FE-02-DB) 
 
 
Glossary 
 
Bridge: A bridge is an intelligent, internetworking device that forw ards or filters packets...

IP Address and Network (Subnet) Mask: IP stands for Internet Protocol. An IP address consists of a series of four 
numbers separated by periods, that ident ifies a single, unique Internet computer host in an IP network. Example: 
192.168.2.1. It consists of 2  portions: the IP network addr ess, and the host identifier. 
 
The IP address is a 32-bit binary pattern, which can be repr esented as four cascaded decimal numbers separated by “.”: 
aaa.aaa.aaa.aaa, where each “aaa”  can be anything from 000 to...

particular network (as opposed to valid IP address numbers recognized by the Internet, which must be assigned by 
InterNIC).  
TCP/IP, UDP:  Transmission Control Protocol/Internet Protocol (TCP/IP ) and Unreliable Datagram Protocol (UDP). TCP/IP 
is the standard protocol for data transmission over the In ternet. Both TCP and UDP are transport layer protocol. TCP 
performs proper error detection and error recovery, and thus is reliable. UDP on the other hand is not reliable. They both 
run on top of the...