Dwin Electronics Transvision 3 Enhanced Users Manual

							
TransVision
™ 
3 Enhanced
 
TransVision™ 3 Enhanced
1.1
Printed in USA 
						

							
1

Table of Contents
Safety Instructions ..........................................................................................2
Introduction .....................................................................................................5
Processor Front Panel Controls .....................................................................6
Processor Rear Panel—Connections and Installation ..................................7
Programming URC-100 Remote Control to Operate TransVision
™ 3E ......11
Quick Reference Remote Control Operation ..............................................12
Navigating The Control Menus ...................................................................14
  Information Menu .....................................................................................
14
  Main Menu ...............................................................................................
14
  Input Option. ............................................................................................
15
  Format Option ..........................................................................................
15
  Video Control Menu .................................................................................
16
  Setup Options ..........................................................................................
17
  Menu Timeout .................................................................................17
 Menu Position ..................................................................................17
 Rename Inputs ................................................................................18 
 Rename Formats .............................................................................18
 Num Buttons ...................................................................................19
 Screen Setup ...................................................................................19
 Image Setup ....................................................................................19
 Custom Format ................................................................................20
 Relay Setup ......................................................................................21
 Power Button Setup ........................................................................21
 Lamp Hours .....................................................................................21
Projector Installation  ...................................................................................22
Physical Dimensions  ...................................................................................31
TransVision
™ 3E RS-232 Control  .................................................................32
Specifications  ...............................................................................................
33
Warranty . ......................................................................................................
35 
						

							
2

Safety Instructions
 
1.    Read  and  apply  all  of  the  safety  and  operating  instructions  with  your video equipment.
2.   Keep all safety and operating instruction for future reference.
3.    Unplug this video equipment from the wall outlet before cleaning. Never use liquid or aerosol cleaners. Use only a damp cloth for cleaning.
4.    Do not use any attachments or accessories not recommended by the  manufacturer as they may cause hazards.
5.  Do  not  use  this  video  equipment  near  water.  Avoid  placing  it  near  a bathtub, kitchen sink, or laundry tub, in a wet basement, or near a swim
-
ming pool.
6.  Do not place this video equipment on an unstable cart, stand, or table.  The video equipment may fall, causing serious injury to a child or adult 
and serious damage to the appliance. Use only with a cart or stand rec
-
ommended by the manufacturer. Wall or shelf mounting should follow 
the manufacturer’s instructions, and should use a mounting kit approved 
by the manufacturer.
   6.1  Move  any  appliance  and  cart  combination  with  care.  Quick  stops, 
excessive force, and uneven surfaces may cause the appliance and a 
cart to overturn.
7.  Side, Top and Bottom openings in the cabinet are provided for ventila-
tion, and to insure reliable operation of the video equipment and protect 
it  from  overheating.  These  openings  must  not  be  blocked  or  covered. 
Never  place  the  video  equipment  on  a  bed,  sofa,  rug,  or  other  similar 
surface  that  may  block  ventilation  openings.  Never  place  this  product 
near or over a radiator or heat register.  Do not place this product in a 
built-in installation such as a bookcase or rack unless proper ventilation 
is provided.
8.  Operate  only  from  the  type  of  power  source  indicated  on  the  marking  label. If you are not sure of the type of power supply to your home, con
-
sult your appliance dealer or local power company. 
9.  This unit is equipped with a three conductor polarized alternating-current  line plug. This plug will fit into the power outlet only one way. This is a 
safety feature.  If you are unable to insert the plug fully into the outlet, 
contact  your  electrician  to  replace  your  obsolete  outlet.  Do  not  defeat 
WARNING
HAZARDOUS VOLT AGE
DO NOT OPEN
ATTENTION
COURANT ELECTRIQUE NE P AS OUYRIR
CAN SHOCK, BURN OR CAUSE SEVERE INJUR Y OR DEATH.  DO NOT
REMOVE THE TOP COVER.  REFER SERVICING TO QUALIFIED PERSONNEL.
!
. 
						

							
3

the safety purpose of the polar-ized plug.
10.  Route power supply cords so that they will not be walked on or pinched 
by  items  placed  on  or  against  them.  Pay  particular  attention  to  cords 
at plugs, convenience receptacles, and the points where they exit the 
products.
11.  Protect your video equipment from lightning during a storm or when it is left unattended and unused for long periods of time, unplug it from 
the  wall  outlet.  This  will  prevent  damage  to  the  unit  due  to  lightning 
and power-line surges.
12.  Do not overload wall outlets and extension cords as this can result in fire or electric shock.
13.  Never push objects of any kind into this video equipment through cabi-
net slots as they may touch dangerous voltage points or short out parts 
that could results in a fire or electric shock. Never spill liquid of any kind 
on the video equipment.
14.  Do not attempt to service this unit yourself as opening or removing cover may  expose you to dangerous voltages or other hazards. Refer all servicing to 
 
 qualified service personnel.
15.   Unplug this video equipment from the wall outlet, and refer servicing  to quali-fied service personnel under the following conditions:
15.1 When the power cord or plug is damaged or frayed.
15.2 If liquid has been spilled into the video equipment.
15.3 If the video equipment has been exposed to rain or water.
15.4  If the video equipment does not operate normally by following the operating instructions.  
15.5  Adjust only those controls that are covered by the operating instructions  
as improper adjustment of other controls may result in damage and 
will often require extensive work by a qualified technician to restore 
the video equipment to normal operation.
15.6  If the video equipment has been dropped or the cabinet has been  
damaged.
15.7  When  the  video  equipment  exhibits  a  distinct  change  in  perfor-
mance.
16.  When  replacement  parts  are  required,  be  sure  the  service  technician  has used replacement parts specified by the manufacturer that have the 
same  characteristics  as  the  original  part.  Unauthorized  substitutions 
may result in fire, electric shock, or other hazards.
17.  Upon completion of any service or repairs to this video equipment, ask the  service  technician  to  perform  routine  safety  checks  to  determine 
that the sys-tem is in safe operating condition.
18.  Do not place anything on the video equipment. Heavy objects placed on any part of this system will cause damage.
19.  WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To prevent electric shock do not use this (polarized) 
plug with an extension cord, receptacle or other outlet unless the blades 
can be fully inserted to prevent blade exposure. 
						

							
4

NOTE: This equipment is designed to operate in the USA, Canada and other 
countries where the broadcasting system and AC house current is exactly 
the same as in the USA and Canada.
IMPORTANT INFORMATION FOR THE USER/FCC STATEMENT
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. The limits are 
designed to provide reasonable protection against harmful interference in a 
commercial environment. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communication. 
However, there is no guarantee that harmful interference will not occur in 
a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interfer
-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected.
• Consult the dealer or and experienced radio/TV technician for help. 
						

							
5

Introduction
TransVision™ 3 Enhanced(3E) is a High Definition Digital Video Projection sys-
tem comprising of two complementary components: a High Definition Video 
Projector  featuring  Dark  Chip
™ 3  Digital  Light  Processing  (DLP™)  technology 
from  Texas  Instruments  and  a  Digital  Video  Processor.  The  TransVision
™  3E 
offers  an  outstanding  progressive  scan  HDTV  images  with  16:9  aspect  ratio 
and 1280 x 720 (720P) native resolution. The TransVision
™ Projector may be floor or ceiling mounted and configured 
for front or rear projection. The Digital Video Processor is designed to be located at the video sources. 
It  accepts a total of 10 video inputs, provides source switching, digital video 
processing  of  analog  and  digital  video  sources  and  delivers  a  720p  digital 
output to the Projector via a proprietary DVI cable. The  ten  video  inputs  include:  two  HDCP  compliant  DVI-D;  two  RGB;  two 
Component Video; two S-Video and two Composite. Signal connections between the Digital Video Processor and the Projector 
are made through a proprietary DVI cable with a Control Signal. The Control 
Signal is used to transmit bi-directional control signals (on, off, lamp status…) 
between the Projector and the Processor. An infrared learning wireless remote control with on-screen graphics selects 
the input source and adjusts all of the operating controls. The system may also 
be controlled from the front panel or from a RS-232 serial port.  IR sensors on both the Projector and the Processor allow the system to be 
controlled from either unit.  Video and image settings for each individual video input may be adjusted 
and stored separately in the system’s memory.  These settings are recalled for 
each input and video type when selected. The TransVision
™ 3E determines the video signal type by measuring horizon-
tal and vertical scanning frequencies. If the video signal matches a predefined 
video source,  the TransVision
™ 3E selects  video and image settings from the 
system’s memory. The predefined video sources include: 480i, 480p, 580i, 580p, 
1080i, 540p, and 720p and computer sources VGA, SVGA, XGA, SXGA. In addition to predefined video sources, the TransVision
™ 3E allows the user 
to create up to three new video source memory locations per video input. For more details on how to create memory location for new video sources 
refer to the “Image Setup Menu.
”
Two programmable 12 Volt screen trigger outputs are also provided to trig
-
ger a relay in an electric screen, projector lift, or other relay activated device. 
						

							
6

Processor Front Panel Controls
The TransVision™ 3E Processor front panel controls include:
•  A 
POWER button to turn the system On or Off.
•  An indicator light ( LED) which is lit when the unit is turned on and blinks when 
a valid IR command is received.  — When the LED is DARK the AC power to the unit is turned off.
—  When the LED is flashing On and Off, power is connected and the unit is  in the standby mode.
—  When the LED is on the unit is powered on.
—  When the LED is flashing fast, this indicates that the lamp failed to ignite.  If the lamp failed to ignite, the lamp may either be burned or hot. In case 
the lamp is hot, wait approximately 1 minute to turn the unit on.
• An 
IR Receiver Window
•  A  MENU   button  to  display  the  Main  menu  or  to  return  to  the  previous 
menu.
•  
Up ▲ and down ▼ FUNCTION buttons to sequences through the on-screen 
menu options.
•   Left
 ◀  and  right ▶  VALUE   buttons  to  adjust  values  or  to  move  to  a  sub-
menu.  
						

							
7

Processor Rear Panel — Connections and Installation 
19
 2 3 5 6 7 8 4
1. DVI/HDCP Output to Display   DVI-D
2. DVI/HDCP Inputs   (DVI 1, DVI 2)  DVI-D
3. Switched +12 VDC Outputs  (RY1, RY2)  2.5mm DC Plug
4. RGBS Computer/HDTV Inputs  (RGB1, RGB2)  D-sub 15 pin Socket
5. RS-232 Computer Input  (RS-232)  D-sub 9 pin Socket
6. S-Video Inputs  (S1, S2)  4 pin Mini-Din
7. Composite Video Inputs  (V1, V2)  RCA Type
8. Component  Video Inputs  (Y1, R1, B1)  RCA Type
  (Y2, R2, B2)  RCA Type
9. AC Power Receptacle  (AC IN)  3 Prong Receptacle 
						

							
8

1. DIGITAL OUTPUT (DVI )
Connect  the  digital  video  output  from  the  processor  to  the  projector  using 
DWIN’s DVI-D cable. 
Special Note about In-Wall Installations and Cable Lengths:
A standard rectangular DVI connector is fairly large in size (approximately 2” 
wide) making it difficult to run through the walls. DWIN’s solution is to termi
-
nate one end of the DVI cable with a .75” circular connector that can easily run 
through a 1” conduit (figure 1).  DWIN offers a series of unique (DVI-D-xx) cables in six different lengths: 25, 
30, 35, 40, 45, and 50 feet. Part numbers for these cables are DVI-D-xx, the “xx” 
refers to the length of the cable. Part numbers for these cables are DVI-D-xx, 
the “xx” refers to the length of the cable. For cable lengths longer than 50 feet, 
use DWIN’s Cable Extender. The cable extender operates with DVI-R-xx cables 
and are available in 25, 35, and 50 Feet lengths
Fig. 1: DVI Cable with Circular Connector
2. DVI-D INPUTS
The  DVI  1  and  DVI  2  inputs  are  HDCP  compliant  for  High-Definition  (480p, 
580p, 720p, 1080i) sources or computer graphics with VGA, SVGA, XGA, and 
WXGA resolutions. For computer graphics with VGA, SVGA, XGA, or WXGA 
it is recommended to set the computer to 60 Hz vertical frequency. If your computer video card has DVI output, connect the DVI cable to the DVI 
1 or DVI 2 inputs of the Digital Processor. Select the corresponding DVI input by 
pressing “9” or “0” on the remote control, then activate the DVI output from 
the computer by using computer’s display set-up menu.  
 
Connects to the ProcessorConnects to the Projector