Dukane Projector 8928B User Manual

41
IMAGE menu
ItemDescription
OVER SCAN Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)  ó Large (It reduces picture)
• This item can be selected only for a video and component video 
signal.
• For an HDMI
TM signal, this item can also be selected if either (1) or 
(2) applies. 
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
(2) 
 HDMI FORMAT item in the INPUT menu is set to AUTO, and the 
projector recognizes that it receives video signals.
V POSITION Using the...

42
IMAGE menu
ItemDescription
H PHASE
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.
Right  ó Left
• This item can be selected only for a computer signal or a 
component video signal. This function is unavailable for a signal 
from the LAN, USB TYPE A, USB TYPE B or HDMI port.
H SIZE Using the ◄/► buttons adjusts the horizontal size.
Small  ó Large
• This item can be selected only for a computer signal. This function 
is unavailable for a signal from the  LAN, USB TYPE A, USB...

43
INPUT menu
INPUT menu
From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
PROGRESSIVE Using the ▲/▼ buttons switches the progress mode.
TV  ó FILM 
ó OFF
  
• This function works only for a video signal, component video signal 
(of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM signal (of 
480i@60 or...

44
INPUT menu
ItemDescription
VIDEO FORMAT The video format for VIDEO port can be set.
Using the ◄/► buttons 
switches 
the mode for video format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM
      N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal from the  VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the 
picture becomes unstable (e.g. an irregular picture, lack of color), 
please select the mode...

45
INPUT menu
ItemDescription
COMPUTER IN The computer input signal type for 
COMPUTER IN1 and IN2 ports 
can be set.
(1) 
 Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)  Use the ◄/► buttons to select 
the computer input signal type. (COMPUTER IN1)
  AUTO  ó SYNC ON G OFF
(COMPUTER IN2)
  AUTO  ó SYNC ON G OFF 
ó MONITOR OUT
• Selecting the AUTO mode allows  
you to input a sync on G signal or component video signal from the 
port (
 12).
• In the AUTO mode, the picture may be...

46
INPUT menu
ItemDescription
RESOLUTION The resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1) 
 In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.
(2) 
 In the RESOLUTION menu select the 
resolution you wish to display using 
the ▲/▼ buttons.  
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) 
 Pressing the ► or ENTER button when 
selecting a STANDARD...

47
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
AUTO KEYSTONE Selecting this item performs the Automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be...

48
SETUP menu
ItemDescription
 KEYSTONEUsing the ◄/► buttons corrects the horizontal keystone distortion.
Shrink the right of the image  ó Shrink the left of the image
• The adjustable range of this function will vary among inputs. For 
some input, this function may not work well.
• 
This function is unavailable when the TRANSITION DETECTOR 
(
 77)  is ON or the screen is adjusted by PERFECT FIT (48).
PERFECT FIT This item allows you to adjust the shape of the projected image in
each of the corners and...

49
SETUP menu
ItemDescription
PERFECT FIT (continued) • While the distortion is adjusted with the PERFECT FIT function, 
keystone adjustment feature is unavailable. To correct the keystone 
distortion, reset the adjustment of all the corners and sides.
• The adjustable range of this correction will vary among inputs. For 
some input, this function may not work well.
• One adjustment position common to the top and bottom sides can 
be set. Also, another adjustment position common to the left and 
right...

50
SETUP menu
ItemDescription
LAMP &  FILTER(conti-nued) LAMP 
TIME The lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the RESET button on the remote control or the ► button 
of the projector displays a dialog. 
To reset the lamp time, select the OK using the ► button.
CANCEL
 ð OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• 
For the lamp replacement, see the section...