Dukane Projector 8527 User Manual

61
OPTION menu
ItemDescription
MY BUTTON This item is to assign one of the following functions to 
MY BUTTON 
1/2 on the remote control (
 6).
(1)
  Use the ▲/▼ buttons on the MY BUTTON menu to select a MY 
BUTTON - (1/2) and press the ► or 

ENTER button to display the 
MY BUTTON setup dialog. 
(2)
  Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the ENTER or INPUT

 
button to save the setting.
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.
•...

62
OPTION menu
ItemDescription
MY BUTTON (Continued )• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (

34).
•  FILTER RESET: Displays the filter time reset confirmation dialogue  ( 50).
• TEMPLATE: Makes the template pattern selected to the
 TEMPLATE item (
 57) appear or disappear.
• AV MUTE: Turns the picture and audio on/off.
• 
 RESOLUTION: Turns on/off the RESOLUTION dialog ( 46).
•  MIC VOLUME: Turns on/off the MIC VOLUME dialog ( 52).
•  HDCR:Turns...

63
OPTION menu
                •Please refer to the actual on-screen display(OSD) 
for appropriate operation.
ItemDescription
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2 Select OK to finish the settings.
NOTE
Item Description
DATE AND TIME Set the DATE(Year/Month/Date) and Time(24-
hour scale).
SPECIFIC DATE Set specific date from 1 to 10.
PROGRAM EDIT The TIME and EVENT for Program 1 to 16 
can be editted.
■ How to activate (DATE AND TIME / SPECIFIC DATE)...

64
OPTION menu
ItemDescription
SCHEDULE
(Continued ) 2/2 page (Set specific date from 1 to 10.)
Press the ▼ cursor button to move from 1/2 page to 2/2 page with
the state of selecting "SATURDAY".
■ PROGRAM EDIT
The TIME and EVENT for Program 1 to 16 can be editted.
• RETURN
Select this to go back 
to the top menu of the 
SCHEDULE.
• SELECT
Select from PROGRAM-01 
to 16 to edit. 
Each PROGRAM can be 
setup up to 20 settings
• COPY TO
The selected program (with the settings of TIME and EVENT) 
can...

65
OPTION menu
ItemDescription
SCHEDULE
(Continued )
■ How to edit the selected PROGRAM
1. 
 Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.
2. Use the ◄/► cursor 
buttons to select.
3. Use the ◄/► cursor 
buttons to adjust.
EVENT

 can be selected as listed below.
◦ POWER − ON, STANDBY
◦ INPUT SOURCE − "input source"channel
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF
◦ MESSENGER − TEXT-1 to 12, TEXT OFF
◦ BLANK − ON, OFF
◦ SLIDESHOW...

66
OPTION menu
ItemDescription
SERVICE Selecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ buttons, 
and press the ► button or the ENTER 
button on the remote control to execute 
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling fans. 
The HIGH is the mode for use at highlands etc. If the projector is used
at an altitude of about 1600 m (5250 feet) or higher, select HIGH. 
Otherwise, select NORMAL. Note that the projector is noisier when the...

67
OPTION menu
ItemDescription
SERVICE
(continued) REMOTE FREQ.
(1)
  Use the ▲/▼ button to change the projector's remote sensor 
frequency setting 
(
19).
1:NORMAL  ó 2:HIGH
(2)
  Use the ◄/► button to change the 
projector's remote sensor on or off. ON  ó OFF
If the remote control does not function correctly, disable either of them.It's not possible to disable both options at the same time.
COMMUNICATION
Selecting this item displays COMMUNICATION 
menu. 
In this menu, you can configure the...

68
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION(continued)
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE: Select this type, if it is  required to control an external device as a 
network terminal, via this projector from the 
computer.
The CONTROL port doesn't accept RS-232C  
commands (Network Bridge Function in the 
Network Guide)
OFF: Select this mode to receive RS-232C  commands using the  CONTROL port. 
• OFF is selected...

69
OPTION menu
ItemDescription
SERVICE
(continued)
COMMUNICATION (continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF  ó 1s 
ó 2s 
ó 3s
    
OFF: Select this mode if it is not required to check  the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the...

70
OPTION menu
ItemDescription
SERVICE
(continued)
CLONING(continued)
The following items are exempted.
SETUP: LAMP TIME, FILTER TIME 
OPTION: SERVICE(GHOST), DATE AND TIME
NETWORK: WIRELESS AND WIRED SETUP
(IP ADDRESS, SUBNET MASK, 
DEFAULT GATEWAY), MY IMAGE, 
PRESENTATION, AMX D.D.
SECURITY: MY TEXT DISPLAY
• Operation is not available if SECURITY_
CLONNING LOCK is turned ON.
• The Screen_MyScreen can only be loaded.
CLONING load function on STANDBY MODE
• While the projector is in STANDBY MODE, push...