Dukane Projector 6132HD User Manual

4
English ...
Introduction
Product Features
■ High resolution   
Full HD (1920 x 1080) support. 
■ 0.5 W in standby condition with energy saving technology   
Selecting [NORMAL] for [STANDBY MODE] from the menu 
can put the projector in power-saving mode that consumes 
only 0.5 W (typical value).
■ Two HDMI input ports provide digital signal  
The two HDMI inputs provide HDCP compatible digital 
signals. The HDMI input
■ Quick Power Off, Direct Power Off  
The projetor can be put away immediately after...

5... English
Introduction
Power Cord x1 Remote Control
(P/N:7N901052)
Projector
Package Overview
This projector comes with all the items shown below. Check 
to make sure your unit is completed. Contact your dealer 
immediately if anything is missing.
Batteries (AAAx2)Cable Cover(P/N:79TCP141)
Attachment Plate  
(P/N: 79TCP151)Security Label
Computer Cable (VGA)(P/N:7N520087)
US  (P/N:79TC3011)
EU (P/N:79TC3021)
Note: The Dukane models described in this document are manufactured 
by NEC and use the same...

6
English ...
Introduction
1.  Control Panel
2. Focus Lever
3. Intake vent
4. Remote Control Sensor
5. Exhaust vent
Projector
Product Overview
6. Speaker 
7. AC IN terminal
8. Input / Output Connections
9. Cover Glass
10. Tilt foot
6
7
8
4
2
5
3
1
10
9 

7... English
Introduction
Connection Ports
1. SERVICE Port (for service purpose only)
2. MONITOR OUT Connector (Separate sync signal only)
3. PC CONTROL Connector
4. COMPUTER IN Connector
5. VIDEO IN Connector
6. HDMI 2 IN Connector
7. HDMI 1/MHL IN Connector
8. AUDIO IN R Connector
9
. AUDIO IN L Connector 
10.  AUDIO IN Jack (3.5mm mini jack)
11. AUDIO OUT Jack (3.5mm mini Jack)
12. AC IN Terminal
13. KensingtonTM Lock  Port
14. USB TYPE A Connector
15. LAN Connector (RJ-45)
521
12
4
15
7610113
1314
89 

8
English ...
Introduction
Control Panel
3
68
7
214
5
1POWER LED Indicate the projector’s status.
2 ENTER Confirm your section of items in su b 
menu operation.
3 STATUS LED Indicate the projector’s temperature 
status.
4 LAMP LED Indicate the projector’s lamp status.
5 MENU Press “MENU” to launch the On-
screen display (OSD), back to the top 
level of OSD for the OSD main menu 
operation
6 SOURCE Press “SOURCE” to select an input 
signal.
7
Four  
Directional 
Select Keys Use  or  or  or  to select...

9... English
Introduction
Attaching the Cable Cover
 Procedure for Attaching the Cable Cover:
 1. Mount the cable cover to the projector. 
	 2. Tighten two screws on both sides of the cable cover.  
Cable Cover
 1
 2
 CAUTION:•  Be sure to tighten the screws after 
attaching the cable 
cover. Failure to 
do so may cause 
the cable cover to 
come off and fall, 
resulting in injury 
or damage to the 
cable cover.
•  Do not put bundled cables in the cable 
cover. Failure to 
do so may damage 
the power...

10
English ...
Introduction
Remote Control
1POWER ONPower on the projector. Refer 
to the “Power On/Off the 
Projector” section on pages 22-
23.
2 POWER OFF Power off the projector.Refer 
to the “Power On/Off the 
Projector” section on pages 22-
23.
3
4
5 18
10
11
13 19
24
26
28
30 27
12
1162
8
23
21
9
25
14
29
31
17
15
67
20
22 

11... English
Introduction
3COMPUTER  1 Press “1” to choose Computer IN 
connector.
4 COMPUTER  2  No function.
5 HDMI  1 Press “4” to choose  HDMI 1/
MHL IN connector.
6 VIDEO Press “VIDEO” to choose VIDEO  
IN connector.
7 USB  A No function.
8 ID SET No function.
9 AV-MUTE Momentarily turn off/on the 
audio and video.
10 MENU Press “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation
11 D-ZOOM Zoom in/out the projected 
image. 
12 KEYSTONE...

12
English ...
Introduction
18HDMI  2 Press “5” to choose  HDMI 2 IN 
connector.
19 DISPLAY 
PORT No function.
20 USB  B No function.
21 Number Button No function.
22 LAN No function.
23 CLEAR Clear the password while you 
input the password.
24 FREEZE Freeze To pause the screen 
image. Press again to resume the 
screen image.
25 EXIT Exit the settings.
26 ENTER Confirm your section of items in 
sub menu operation.
27
Four  
Directional 
Select Buttons Use  ,  ,  or  to select items 
or make adjustments...

13... English
Introduction
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
• Replace only with the same or equivalent type recommended by 
the manufacturer.
• Dispose of used batteries according to your local regulations.
1. Press firmly and slide the battery cover off.
2.   Install new batteries (AAA). 
Ensure that you have the...