Dukane Portable Lcd Projector Models 8064 Users Manual

9

Preparations
About the filter cover for bottom-up use
WARNING  ►Do not replace the filter cover and/or air filter during use or 
immediately after use. Handling while the projector is in a high temperature 
could cause a burn and/or malfunction to the projector. Before operating, make 
sure that the power switch is off, that the power cord is not plugged in, and that 
the projector is cool adequately.
When the projector is installed bottom up, please use the accessory filter cover 
for bottom-up use. It...

10

Setting up
Setting up
WARNING  ►Place the projector in a stable position horizontally. A fall or 
a turnover could cause an injury and/or damage to the projector. Then using 
damaged projector could result in a fire and/or an electric shock.
•  Don’t place the projector on an unstable, slant or vibrant surface such as a 
wobbly or inclined stand.
•  Do not place the projector in the side/front/rear-up position, except care of the  air filter. 
•  For the projector installed bottom-up, use the...

11

Setting up
(a) Screen size  [inch (m)](b) Projection distance  [m (inch)](c) Screen height [cm (inch)]downup
40(1.0)1.5(57)8.7(3)52.3(21)
50(1.3)1.8(72)10.9(4)65.3(26)
60(1.5)2.2(87)13.1(5)78.4(31)
70(1.8)2.6(101)15.2(6)91.4(36)
80(2.0)2.9(116)17.4(7)104.5(41)
90(2.3)3.3(130)19.6(8)117.6(46)
100(2.5)3.7(145)21.8(9)130.6(51)
120(3.0)4.4(174)26.1(10)156.8(62)
150(3.8)5.5(218)32.7(13)195.9(77)
200(5.1)7.4(291)43.5(17)261.3(103)
(a) Screen size  [inch (m)](b) Projection distance  [m (inch)](c) Screen...

12

Adjusting the projector's elevator
WARNING  ►Do not adjust the projector’s elevator during use or 
immediately after use. Handling while the projector is in a high temperature 
could cause a burn and/or malfunction to the projector.
 Before operating, make 
sure that the power switch is off, that the power cord is not plugged in, and that 
the projector is cool adequately.
CAUTION  ►If you press the elevator button without holding the projector, 
the projector might crash down, overturn, smash...

13

Setting up
Connecting your devices
CAUTION  ►Turn off all devices prior to connecting them to the projector. 
Attempting to connect a live device to the projector may generate extremely 
loud noises or other abnormalities that may result in malfunction and/or damage 
to the device and/or projector.
►Use the accessory cable or a designated-type cable for the connection. 
Some cables have to be used with core set. A too long cable may cause a 
certain picture degradation. Please consult with your...

14

K

K
K
K

Setting up
Audio outS-Video outRS-232CRGB out
Examples of connection with a computer 
Examples of connection with a VCR/DVD player
Audio cable (stereo mini)
RGB cable
Video outAudio out
Audio cable (stereo mini)
Audio cable (stereo mini)
Audio out
Component video cable
Audio out
Audio cable (stereo mini) Video cable
RS-232C cable
S-Video cable
Component video out 

15

Connecting power supply
WARNING  ►Please use extra caution when connecting the power cord as 
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact 
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's 
specified voltage range.
• Never modify the power cord. Never attempt to defeat the ground connection 
of the three-pronged plug....

16

Power on/off
Power on/off
Turning on the power
WARNING  ►When the power is on, a strong light is emitted. Do not look 
into the lens or vents of the projector.
NOTE  •  Turn the power on in right order.  Please power on the projector before 
the connected devices. 
STANDBY/ON button
1. Make sure that the power cord is firmly and correctly connected to the 
projector and outlet.  
2. Open the lens cover, and set the power switch to the ON position.  
The power indicator will light to solid orange....

17

Turning off  the power
NOTE  • Turn the power off in right order. Please power off the projector after the 
connected devices.
• Except for an emergency, whenever you turn the projector off, obey the procedure 
of the following “Turning off the power”, and do not disconnect the power cord until the 
procedure is completed. Neglect causes a damage of the electrode and un-lighting of 
the lamp.
• This Projector is controlled by an internal microprocessor. Under certain exceptional 
circumstances, the...

18

Operating
Operating
Adjusting the volume
1. Press the VOLUME button on the remote control. 
A dialog will appear on the screen to aid you in adjusting 
the volume.
2. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button 
again. Even if you don’t do anything, the dialog will automatically disappear 
after a few seconds. 
Temporarily muting the sound
1. Press the MUTE button on the remote control.  
A dialog will appear on the screen...