Dukane Imagepro Software Utility Installation Guide

							9
 3. Software Installation
NOTE
•Windows XP operations will be described in examples given here.
• When using Windows 2000, please perform software installation/uninstalling with
Administrators authority. When using Windows XP, perform with Computer
Administrator authority.
•   If you ha ve  Dukane  Projector User Support ware (Dynamic Image Utility 2.0 and Image
Express Utility 1.0) already installed on your computer, before installing the new NEC
Projector User Supportware, first uninstall the current one.

   Installation
Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be insta\
lled together. The two
programs cannot be installed individually.
After that, install Image Express Utility 1.0.
Preparation:
Start Windows.
If Windows has already been started, please exit all running application software. The installation
may not be completed properly unless all software has been exited.

Set the supplied CD-ROM in the CD-ROM drive.
The Startup screen will appear.
Reference
Should the Startup screen not appear...
1) Click [Start].
2) Click [Run (R)].  The [Run] screen will appear.
3) Enter the CD-ROM drive name (e.g., Q: \) and then SETUP.EXE to [Open (O)].
4) Click [OK].  The Startup screen will appear. 3. Software Installation


Cli
ck Please read this fi rst to open P rojector User Suppo rtware
Readme File.
After reading the readme, click [x] on the window.
The window of the readme file will be closed.
Click Installing the Dynamic Image Utility 2.0.
The installation will start automatically and the “Welcome” screen will appear.
Click [Next >] at the Welcome screen.
The End User License Agreement screen will appear.
• Please carefully read the contents of the End User License Agreement.
 
						

							
 Uninstalling
Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be uninstalled together. The
two programs cannot be uninstalled individually.
Image Express Utility 1.0 will be uninstalled.

Click [Start] on Windows.
Click [
Control Panel].
The Control Panel screen will be displayed.
Double click [Add or Remove Programs].
The Add or Remove Programs screen will appear.
Click Dynamic Image Utility 2.0 from the list.
To uninstall Image Express Utility 1.0, click “Image Express Utility 1.0” from the list.
Click [Change/Remove. . . ].
A message “Are you sure you want to completely remove the selected application and
all of its components?” will be displayed.
Check the message and click [Yes].
Now, follow the operations described in the screen messages.
When the uninstall procedure is completed, there will be a return to the Add or Remove
Programs screen.
Click [OK].
There will be a return to the Control Panel screen
3. Software Installation







10

If you agree, click [Yes].
• If you do not agree, please click [No] and exit the installer.
Now, follow the operations described in the screen messages.
•Viewer PPT Converter 2.0 will be installed together at the time of installation of
Dynamic Image Utility 2.0.
•If a message prompting you to restart the system will appear, restart the Windows.
Click “Installing the Image Express Utility 1.0”
•Repeat the steps  to  above stated.
Reference
•To cancel the installation of the supplied software part way through the installation, click
[Cancel] and follow the instructions of the dialog box.

Please remove the CD-ROM from the CD-ROM drive when the installation is completed. 
						

							11
 4. Starting/Exiting the Software

 Dynamic Image Utility 2.0
 Start the Software
Preparation:
Install the software on the personal computer from the supplied CD-ROM. (Page 9)
The software cannot be started from the supplied CD-ROM.


From the [Start] menu click [All Programs] 
 [NEC Projector User
Supportware] 
 [Dynamic Image Utility 2.0].
Dynamic Image Utility 2.0 will start.
Reference
• By selecting a PowerPoint file with Dynamic Image Utility 2.0 and clicking [Tools] 
 [Converting
PowerPoint file], the function equivalent to Viewer PPT Converter 2.0 can be executed.
• Image Express Utility 1.0 can be started by clicking [
Tools] 
 [Image Express Utility 1.0 Start] of
Dynamic Image Utility 2.0.
 Display Help
Preparation:
Please start Dynamic Image Utility 2.0.
Click [Help] on the menu bar.
The [Help] pull-down menu will appear.
Click [Help...F1].
The [Help] screen will appear.



 Exit the Software
Click [
File] on the menu bar.
The [File] pull-down menu will appear.
Click [Exit].
Dynamic Image Utility 2.0 will close.

4.Starting/Exiting the Software
NOTE: Windows XP operations will be described in examples given here. 
						

							4.Starting/Exiting the Software

 Viewer PPT Converter 2.0
 Start the Software
Preparation:
(1) Check that Microsoft PowerPoint has been installed. Viewer PPT Converter 2.0 cannot be
used unless PowerPoint has been installed.
(2) Install the software on the personal computer from the supplied CD-ROM. (Page 9)
The software cannot be started from the supplied CD-ROM.
From the [Start] menu click [All Programs] 
 [NEC Projector User
Supportware] 
 [Viewer PPT Converter 2.0].
Dynamic Image Utility 2.0 will start.
Reference
•A function equivalent to Viewer PPT Converter 2.0 can also be executed from the Dynamic Image
Utility 2.0 [
Tools] 
 [Converting PowerPoint file] menu.
•Viewer PPT Converter 2.0 can also be started from the Microsoft PowerPoint 2000/2002 [
Tools]

[NEC Projector User Supportware] 
 [Output Viewer] menu.
  Display Help
Preparation:
Please start Viewer PPT Converter 2.0.
Click [Help].
The [Help] menu will appear.




  Exit the Software
Click [Exit].
Viewer PPT Converter 2.0 will close.


12 
						

							13

  Image Express Utility 1.0
 Start the Software
Preparation:
Install the software on the personal computer from the supplied CD-ROM. (Page 9)
The software cannot be started from the supplied CD-ROM.
From the [Start] menu click [All Programs] 
 [NEC Projector User
Supportware] 
 [Image Express Utility 1.0].
Image Express Utility 1.0 will start.
Reference
•Image Express Utility 1.0 can also be started from the [Tools] 
 [Image Express Utility 1.0 Start]
menu of Dynamic Image Utility 2.0.


  Display Help
Preparation:
Please start Image Express Utility 1.0.
Click the [] or [] icon of the Windows screen task tray.
The main menu of Image Express Utility 1.0 will appear.
Click [Help] .
The Help screen will appear.



  Exit the Software
Click the [
] or [] icon of the Windows screen task tray.
The main menu of Image Express Utility 1.0 will appear.
Click [Exit].
Image Express Utility 1.0 will close.



4.Starting/Exiting the Software 
						

							 5. Troubleshooting
5. Troubleshooting
•In this chapter, the software names have been abbreviated as follows:
Dynamic Image Utility 2.0 to DIU 2.0, Viewer PPT Converter 2.0 to PPTC 2.0, and Image
Express Utility 1.0 to IEU 1.0.
Installation does not complete normally.
Check PointsCountermeasures
When using Windows 2000, did you log on with
Administrators authority? When using Windows
XP, did you log on with Computer Administrator
authority?When using Windows 2000 or Windows XP, log
on with the authority described at the left and
then install.
Has Microsoft PowerPoint 2000/2002 been
installed on the personal computer to which this
projector software is being installed?
When this projector software is installed on a
personal computer that does not have
PowerPoint 2000/2002 installed, a message to
the effect of Error in the automatic registration of
PPTViewer2.dll will appear part way through the
installation.When the message described at the left appears
part way through the installation, add-in
registration will not be made to PowerPoint;
however, the installation of this projector software
will be completed normally.
To have add-in registration made to PowerPoint,
please install this projector software to a personal
computer on which PowerPoint 2000/2002 has
been installed.
Viewer PPT Converter 2.0 does not function. (PPTC 2.0)
Check PointsCountermeasures
Has Microsoft PowerPoint been installed on the
personal computer?Install PowerPoint on the personal computer. Or,
install Viewer PPT Converter 2.0 on a personal
computer on which PowerPoint has been
installed.
When using the projector control function, the projector power does
not switch on. (DIU 2.0)
Check PointsCountermeasures
Are the personal computer and the projector
connected with a USB or serial cable?
Or, are the personal computer and the projector
connected with a LAN?Connect the personal computer and the
projector with the supplied USB cable or an
optional serial cable.
Or, purchase a commercially available LAN card
or optional wireless LAN card.
When the personal computer and the projector
are connected with a LAN or USB, is the
projector in the idle mode?In the [Projector Options]
[Setup] menu of the
projector, place checkmark in “Idle Mode”.
Connect a power cable to the power outlet and
set the main power switch to I (On).
14 
						

							15
 You want to delete the PowerPoint add-in registration. (PPTC 2.0)
Check PointsCountermeasures
Installing this projector software when Microsoft
PowerPoint 2000/2002 has already been
installed on the personal computer, will result in
the automatic registration of the add-in to
PowerPoint.Please see the PowerPoint Help function for the
method of deleting PowerPoint add-in registra-
tions.
The PowerPoint add-in registration will not be
deleted even when this projector software is
uninstalled.
Projection to the screen is not possible when using the LAN
environment. (DIU 2.0, IEU 1.0)
Check PointsCountermeasures
Have LAN cards (i.e., adapters) been put into
both the personal computer and the projector?Put LAN cards (i.e., adapters) into both the
personal computer and the projector.
Have the LAN settings (for both the personal
computer and the projector) been completed?Perform the LAN settings for both the personal
computer and the projector.
Are a wired LAN and a wireless LAN being used
simultaneously with the same personal com-
puter?Please cancel either one of the LAN connections.
When a built-in type is used, set it to not used
under Properties.
Image Express Utility 1.0 does not support the following:
(1) Software using Direct X
(2) MS-DOS screens
(3) Microsoft Office assistant
(4) IME
(5) When starting a moving video application first or using some computer’s environments, sending a
moving video image may not be possible.
Operation of this projector software becomes unstable.
(DIU 2.0, IEU 1.0)
Check PointsCountermeasures
When the network settings of the projector or
personal computer are changed while this
projector software (i.e., Dynamic Image Utility 2.0
or Image Express Utility 1.0) is starting or
running, the operation of the projector software
may become unstable.Please restart the projector and the personal
computer. When changes are to be made to the
network settings, exit the projector software
before making the changes.
An application error occurs under Image Express
Utility 1.0 when the screen resolution is changed
during Continuous Transmit.When changes are to be made to the screen
resolution, exit Image Express Utility 1.0 before
making the changes.
5. Troubleshooting
On the LT260K and LT240K, images cannot be
sent from the “Dynamic Image Utility 2.0” on a
PC to the projector on the Continuous Transmit
of the Image Express Utility 1.0.Quit the Continuous Transmmit in the Image
Express Utility 1.0 and then send the image from
Dynamic Image Utility 2.0. 
						

							The projector cannot be found with General search. (IEU 1.0)
Check PointsCountermeasures
Are the wireless LAN settings appropriate?
Are the channel numbers for the personal
computer and the projector set to the same
number?
When WEP (encryption) has been set, has the
same value been set for both the personal
computer and the projector?Please check the access points, the personal
computer setting values and the projector [LAN
Mode] setting values.
When using the infrastructure or 802.11 Ad Hoc,
please set to the same character string since
SSID distinguishes between upper and lower
case characters.
Are radio communication conditions satisfactory? Check whether there are obstacles located
between the access point and the personal
computer. Try moving the personal computer
closer to the access point.
Are the TCP/IP settings (e.g., IP address, sub net
mask, etc.) of the personal computer and the
projector correct?Check whether the network settings are within
the same segment.
Are more than one network cards (NIC) being
used with the same computer?Set only the network card (NIC) that is connected
to the projector to Valid.
For a network card that is not connected to the
projector, click the network card name under
Control Panel 
 System 
 Hardware 

Device Manager 
 Network Adapters and
then click [Properties (R)] and set the device
usage to Not used.
Sometimes it takes a long time for screen transmission from the
personal computer to the projector. (IEU 1.0)
Check Points Countermeasures
•Transmission time may be long depending on
the image pattern.
•When screens are sent to multiple projectors
simultaneously, a larger number of projectors
will result in longer transmission times.
•The transmission time may vary depending on
the network environment.
•The transmission time may vary depending on
the performance of the personal computer as
well as other application software that is
running at the same time.
16
The colors become strange when Windows is set to 256 colors.
(IEU 1.0)
Check PointsCountermeasures
Image Express Utility 1.0 does not support 256
colors.Please set the Windows number of colors setting
to High Color (15 bit) or higher. 
						

							5. Troubleshooting
Transmission time will be longer when the
resolution of the personal computer and that of
the projector differ since there will be an increase
in resolution conversion processing.We recommend that the resolution of the
personal computer and that of the projector
except GT6000 be set to the same setting value.
The resolution of GT5000, MT1065, MT1060,
LT260, LT240, LT260K, LT240K and WT600 is
1024 x 768 dots.
The resolution of LT220 and MT860 is 800 x 600
dots.5. Troubleshooting
17
Check PointsCountermeasures
Cannot follow the screen switching processing of the PowerPoint
slide show, etc. (IEU 1.0)
Check PointsCountermeasures
Smooth screen switching processing or
animation effects cannot be followed because in
Image Express Utility 1.0, the screen condition of
the personal computer is sent to the projector at
a fixed time interval.Use the software with  the PowerPoint screen
switching effects, animation effects, and other
settings set to None. 
						

							Dukane CorporationAudio Visual Products Division2900 Dukane DriveSt. Charles, IL 60174-3395E-mail: [email protected]
Phone: (630) 762-4040Orders: (800) 676-2485Information: (800) 676-2486Fax: (630) 584-5156Parts & Service: (800) 676-2487Fax: (630) 584-0984
Audio Visual Products
401-9066-00 Softw are Guide