Dukane Imagepro 8953h Projector Technical Manual

1
Projector
8953H
User's Manual – Operating Guide
Technical
Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode720 x 400 37.985.0 VESA TEXT
640 x 480 31.559.9 VESA VGA (60Hz)
640 x 480 37.972.8 VESA VGA (72Hz)
640 x 480 37.575.0 VESA VGA (75Hz)
640 x 480 43.385.0 VESA VGA (85Hz)
800 x 600 35.256.3 VESA SVGA (56Hz)
800 x 600 37.960.3 VESA SVGA (60Hz)
800 x 600 48.172.2 VESA SVGA (72Hz)
800 x 600 46.975.0 VESA SVGA (75Hz)
800 x 600 53.785.1 VESA SVGA (85Hz)
832 x 624 49.774.5 Mac...

2
Initial set signals
Initial set signals
The  following  signals  are  used  for  the  initial  settings.  The  signal  timing  of  some 
computer  models  may  be  different.  In  such  case,  adjust  the  items  V  POSITION 
and H POSITION in the IMAGE menu. 
 
Back porch (B) Front porch (D)  Back porch (b) Front porch (d)
  Display interval (C) 
Display interval (c)
Data  Data
H. Sync.  V. Sync.
                  Sync (A)   Sync (a)
Computer/
Signal Horizontal signal timing (μs)
Computer/
Signal...

3
LAN
AC IN
I   O
VIDEO
CONTROL
AUDIO IN1
AUDIO IN2
AUDIO OUT
RGB
 OUTRGB1
RGB2
HDMI
 R             L      R           L
     AUDIO IN3        AUDIO IN4
CB/PBY CR/PR
B/CB/PBR/CR/PRG/Y
HV
USBREMOTE 
CONTROL
   
S-VIDEO
  AUX I/O
DC 5V 0.5A
SD CARD
DHDMI
• Type :Digital audio/video connector
• Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz)
Connection to the ports
ARGB 1, BRGB OUT 
D-sub 15pin mini shrink jack
•  Video  signal:  RGB  separate, Analog,  0.7Vp-p, 
75Ω terminated (positive)
• H/V....

4
LAN
AC IN
I   O
VIDEO
CONTROL
AUDIO IN1
AUDIO IN2
AUDIO OUT
RGB
 OUTRGB1
RGB2
HDMI
 R             L      R           L
     AUDIO IN3        AUDIO IN4
CB/PBY CR/PR
B/CB/PBR/CR/PRG/Y
HV
USBREMOTE 
CONTROL
   
S-VIDEO
  AUX I/O
DC 5V 0.5A
SD CARD
Connection to the ports (continued)
4
3 21
IVIDEO
RCA jack
• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43
• 1.0±0.1Vp-p, 75Ω terminator
HS-VIDEO
Mini DIN 4pin jack
Pin
Signal
1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator
Color signal 0.300Vp-p...

5
LAN
AC IN
I   O
VIDEO
CONTROL
AUDIO IN1
AUDIO IN2
AUDIO OUT
RGB
 OUTRGB1
RGB2
HDMI
 R             L      R           L
     AUDIO IN3        AUDIO IN4
CB/PBY CR/PR
B/CB/PBR/CR/PRG/Y
HV
USBREMOTE 
CONTROL
   
S-VIDEO
  AUX I/O
DC 5V 0.5A
SD CARD
JAUDIO IN 1, KAUDIO IN 2 
Ø3.5 stereo mini jack
• 500 mVrms 47kΩ terminator 
 
AUDIO IN 3 LR, ML, AUDIO IN 4 NR, OL
RCA jack x2
• 500 mVrms 47kΩ terminator
PAUDIO OUT
Ø3.5 stereo mini jack
• 500 mVrms 1kΩ output impedance
QREMOTE CONTROL
Ø3.5 stereo mini jack
•...

6
LAN
AC IN
I   O
VIDEO
CONTROL
AUDIO IN1
AUDIO IN2
AUDIO OUT
RGB
 OUTRGB1
RGB2
HDMI
 R             L      R           L
     AUDIO IN3        AUDIO IN4
CB/PBY CR/PR
B/CB/PBR/CR/PRG/Y
HV
USBREMOTE 
CONTROL
   
S-VIDEO
  AUX I/O
DC 5V 0.5A
SD CARD
Connection to the ports (continued)
TLAN
RJ-45 jack
Pin
Signal PinSignal PinSignal
1 TX+ 4 - 7 -
2 TX- 5 - 8 -
3 RX+ 6 RX-
87654321
VUT
PinSignal PinSignal PinSignal
1 CD/DAT 3 4VDD 7DAT 0
2 CMD 5CLK 8DAT 1
3 VSS 6 VSS 9 DAT 2
UAUX I/O
USB A type jack
4321...

7
RS-232C Communication
RS-232C Communication
67 8
9
1 2 3 4 5     6
7 8
9
1 2 3 4 5 
  CONTROL port  RS-232C cable (Cross)  RS-232C port 
  of the projector   of the computer
 - (1) (1) CD 
  RD (2) (2) RD 
  TD (3) (3) TD 
  - (4) (4) DTR 
  GND (5) (5) GND 
  - (6) (6) DSR 
  RTS (7) (7) RTS 
  CTS (8) (8) DTS 
  - (9) (9) RI
 
Connecting the cable
1. Turn off the projector and the computer. 
2. C o n n e c t   t h e   C O N T R O L  p o r t   o f   t h e   p r o j e c t o r   w i t h   a   R S - 2 3...

8
RS-232C Communication (continued)
Requesting projector status (Get command)
(1)  Send  the  request  code  Header  +  Command  data  (‘02H’+‘00H’+  type  (2 bytes)+‘00H’ +‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +  setting code (2 bytes)) from the computer to the projector. 
(2) The projector...

9
Command Control via the Network
Communication Port
The following two ports are assigned for the command control.TCP #23
TCP #9715
Command Control Settings
Configure the following items form a web browser when command control is used.
When the authentication setting is enabled, the following settings are required.
Command Control via the Network
Port Settings
Network Control 
Port1 (Port: 23) Port open
Click the [Enable] check box to open [Network 
Control Port1 (Port: 23)] to use TCP #23.
Default...

10
Command Control via the Network (continued)
Command Format
[TCP #23]
1. Protocol
Consist of header (7 bytes) + command data (6 bytes)
2. Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low: Lower byte of CRC flag for command data
CRC_high: Upper byte of CRC flag for command data
3. Command data
Command data chart
byte_0 byte_1 byte_2 byte_3 byte_4 byte_5Action TypeSetting code
low high low high low high
Action (byte_0 - 1)
Action Classification Content
1 Set Change setting to desired value.
2...