Dukane Imagepro 8946 Liquid Crystal Projector Users Manual

E-21
6. To complete the procedure, right-click anywhere on the screen.The confirmation screen is displayed.
7. Left-click on OK. This completes the Cornerstone adjustment.
*T o return the Cornerstone adjustment to the default settings, left-
click on Reset in Step 7.
Y ou can save your Cornerstone changes. The changes are saved when
y ou turn off the projector. To do so, select [Projector Options]  → [Setup]
→  [Page 4]. Select the 3D Reform Save check box. This is not selected
at the time of shipment....

E-22
Optimizing RGB Picture Automatically
Adjusting the Image Using Auto Adjust
Optimizing RGB image automatically
Press the Auto Adjust button to optimize an RGB image automatically.
[Poor picture][Normal picture]
AUTO ADJ.
Press the Auto Adjust button to fine-tune the computer image or to re-
move any vertical banding that might appear and to reduce video noise,
dot interference or cross talk (this is evident when part of your image
appears to be shimmering). This function adjusts the clock...

E-23
Setting the function switch
There are two switches on the bottom of the battery case: an applicable
projector selector switch (1) and laser enable/disable switch (2). Check
the projector being used and decide whether to enable or disable laser,
then set these switches as necessary using the tip of a thin ball-point
pen. On this model, an applicable projector selector switch (1) is not
used.
ON
OFF
Switch (2)
On: Enabled (the laser lights when the LASER button is pressed)
[Factory default]
Off:...

E-24
ASPECT
OFF
VIDEO
AUTO ADJ.RGB VIEWER
LASERON
3D REFORMHELPPOINTER
VOLUME MAGNIFY
ZOOM PIC-MUTESLIDE
FOLDER
SLIDE
LIST
POWER
FREEZE
FOCUS
ASPECT
OFF
VIDEO
AUTO ADJ.RGB VIEWER
LASERON
3D 
REFORMHELPPOINTER
VOLUME MAGNIFY
ZOOM PIC-MUTESLIDE
FOLDER
SLIDE
LIST
POWER
FREEZE
FOCUS
CONVENIENT FEATURES
Using the Remote Mouse Function
The built-in remote mouse function enables you to operate your
computers mouse functions from the remote control (Computer mode).
It is a great convenience for clicking through...

E-25
Auto 3D ReformAuto 3D Reform automatically corrects distortion by sensing the outline
or outer frame of your screen with the projector’s built-in image sensor
to project an image within the screen.
NOTE: • The Auto 3D Reform feature supports screen sizes between 30” and 200”\
.
• If the screen has the same brightness as its background, the built-in im\
age
sensor on the front of the projector can fail to recognize the outline o\
r outerframe of the screen.Should this happen, the Auto 3D Reform...

E-26
Setting Screen of Auto 3D Reform
1. Press the MENU button.The Basic menu is displayed.
* When the Advanced menu is displayed, go to Step 3.
2. Use the SELECT 

  or  b utton to highlight “To Advanced Menu” and
press the ENTER button. The Advanced menu is displayed.
3. Use the SELECT 

 or  button to highlight “Projector Options”.
Press the SELECT    b utton. The “3D Reform” option is highlighted.
4. Use the SELECT 

 or  button to highlight “Auto Functions”.
Press the SELECT   b utton. The...

E-27
Turning Off the Image and Sound
Press the Picture Mute button to turn off the image and sound for a
short period of time. Press again to restore the image and sound.
PIC-MUTE
Freezing a Picture
Press the Freeze button to freeze a picture. Press again to resume
motion.
FREEZE
Using the Pointer
Y ou can use one of nine pointers to draw your audiences attention to
the portion of a projected image you want.
Press the Pointer button to dis- play the pointer.
POINTER
Press the Pointer button to display...

E-28
Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially avail-
able USB mouse is required.
NOTE:• The MT1065 comes with a USB mouse.
• There may be some brands of USB mouse that the projector does not sup-
port.
Operate the Menus using the USB mouse
Mouse Cursor
When connecting a USB mouse to the projector, you get a mouse
cursor on the screen.
Unless you use your USB mouse within 10 seconds, the mouse cur-
sor disappears.
Menu Display Clicking with a mouse button displays...

E-29
Changing Background Logo
You can change the default background logo using the PC Card Files
f eature.
NOTE:  File size must be 256KB or less. Other file formats than JPEG and BMPare not available.
1. From the menu, select [Tools] 
→ [PC Card Files] to display a list of all
the files stored in the PC card so that you can select a file you want to use as a background logo.
2. The Logo button allows you to select a background logo from graphic files on a PC card and change to it as the background...

E-30
AC INRGB2 INRGB  OUT
AUDIO
AUDIODVI INUSB(MOUSE/HUB)R EM OTE
AUDIO
AUDIO G/Y
B/Cb HV
RGB1 IN
S
-V
IDEO  INVID
EO  IN
AUDIO
AUDIO
AUDIO
L/MONORL/MONOR AUDIO OUT
L/MONO
R PC CONTROL
1
2
PC card (not supplied)
USING THE VIEWER
NOTE:
•T o use the V iewer, first you need to cr eate presentation materials on your PC
using the Dynamic Image Utility 2.0 contained on the supplied  Projector
User Supportware CD-ROM. For installation, see the printed  Software
Utility Installation Guide. For creating...