Dukane Imagepro 8932 Lcd Projector Users Guide
Have a look at the manual Dukane Imagepro 8932 Lcd Projector Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
52 Appendix Portable and Laptop Activation Chart Many laptop computers do not automatically turn on their exter- nal video port when a projector is connected. Activation com- mands for some laptop computers are listed in the following table. (If your computer is not listed or the given command does not work, refer to the computer ’s documentation for the appro- priate command.) On many laptops, the activation function key is labeled with an icon, for example or the text CRT/LCD. NOTE: Usually, pressing the key commands once activates the external video port, pressing it again activates both the external and internal ports, and pressing it a third time activates the internal port. Refer to your computer’s documentation for details on your specific model. ComputerKey command to activate portKey command to de-activate port Acer Ctrl-Alt-Esc (for setup) Ctrl-Alt-Esc (for setup) AST* ** FN-D or Ctrl-D FN-D or Ctrl-D Ctrl-FN-D Ctrl-FN-D FN-F5 FN-F5 type from A:/IVGA/CRT type from A:/IVGA/CRT FN-F12 FN-F12 AMS FN-F2 FN-F2 AMT setup screen setup screen AT & T F N - F 3 FN-F6FN-F3 FN-F6 Advanced Logic ResearchCtrl-Alt-V Ctrl-Alt-V Altima Shift-Ctrl-Alt-C Shift-Ctrl-Alt-L setup VGA/ Conf.Simulscansetup VGA/ Conf.Simulscan Ambra** FN-F12 FN-F12 FN-F5 FN-F5 F2/Choose Option/F5 F2/Choose Option/F5 Amrel* ** setup menu setup menu Shift-Ctrl-D Shift-Ctrl-D Apple see Mac Portable and Mac PowerBook Aspen automatic automatic Award FN-F6 FN-F6 BCC* automatic reboot computer
53 Bondwell LCD or CRT options after bootupreboot for LCD or CRT options to appear Chaplet** setup screen setup screen FN-F6 FN-F6 FN-F4 FN-F4 Chembook FN-F6 FN-F6 Commax Ctrl-Alt-#6 Ctrl-Alt-#5 Compaq* ** Ctrl-Alt-< Ctrl-Alt-> FN-F4 FN-F4 automatic automatic mode/? (for setup option) mode/? (for setup option) Compuadd* ** automatic automatic Alt-F for screen setup optionAlt-F for screen setup option Data General Ctrl-Alt-Command Ctrl-Alt-Command Data General Wa l k a b o u t2 CRT/X at DOS prompt reboot Datavue Ctrl-Shift-M Ctrl-Shift-M DEC** FN-F5 FN-F5 FN-F4 FN-F4 Dell** Ctrl-Alt-< Ctrl-Alt-> Ctrl-Alt-F10 Ctrl-Alt-F10 FN-F8 (CRT/LCD) FN-F8 FN-D FN-D FN-F12 FN-F12 Digital* automatic reboot FN-F2 FN-F2 Dolch dip switch to CRT dip switch to LCD Epson dip switch to CRT dip switch to LCD Everex* setup screen option setup screen option For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L Fujitsu FN-F10 ComputerKey command to activate portKey command to de-activate port
54 Appendix Gateway FN-F3 FN-F1/FN-F1 again simul- taneousFN-F3 FN-F1 Grid* ** FN-F2, choose auto or simultaneousFN-F2 Ctrl-Alt-Tab Ctrl-Alt-Tab Hitachi FN-F7 FN-F7 Honeywell FN-F10 FN-F10 Hyundai setup screen option setup screen option IBM 970* automatic warm reboot IBM ThinkPad** reboot, enter setup menu FN-F2 FN-F7, select choice from setup menu FN-F1, select choice FN-F5, select choice PS/2 SC select choice (CRT, LCD, etc.) Infotel FN-F12 FN-F12 Kaypro boot up, monitor plugged inunplug monitor Kris Tech FN-F8 FN-F8 Leading Edge FN-T FN-T Mac Portable 100no video port: not compatible Mac PowerBook 140, 145, 150, 170no video port: requires a 3rd-party interface 160, 165, 180, 520, 540, 5300Control Panel folder, Pow- erBook Display folder; Activate Video Mirroringwarm reboot 210, 230, 250, 270, 280, 2300requires Apple Docking Station or Mini Dock Magitronic FN-F4 FN-F4 Mastersport FN-F2 FN-F1 ComputerKey command to activate portKey command to de-activate port
55 Micro Express* automatic warm reboot Micron FN-F2 FN-F2 Microslate* automatic warm reboot Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On NCR setup screen option setup screen option NEC* ** setup screen option setup screen option CRT at the DOS prompt LCD at the DOS prompt FN-F3 FN-F3 Olivetti* automatic automatic FN-O/* FN-O/* Packard Bell* ** FN-F0 FN-F0 Ctrl-Alt-< Ctrl-Alt-> Panasonic FN-F2 FN-F2 Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup Samsung* setup screen option setup screen option Sanyo setup screen option setup screen option Sharp dip switch to CRT dip switch to LCD Sun SPARC- DataviewCtrl-Shift-M Ctrl-Shift-M Tandy** Ctrl-Alt-Insert Ctrl-Alt-Insert setup screen option setup screen option Tangent FN-F5 FN-F5 Texas Instru- ments*setup screen option setup screen option Top-Link* ** setup screen option setup screen option FN-F6 FN-F6 Toshiba* ** Ctrl-Alt-End Ctrl-Alt-Home FN-End FN-Home FN-F5 FN-F5 setup screen option setup screen option Twinhead* FN-F7 FN-F7 FN-F5 FN-F5 Automatic Automatic WinBook Ctrl-Alt-F10 Ctrl-Alt-F10 ComputerKey command to activate portKey command to de-activate port
56 Appendix * These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model. Wyse software driven software driven Zenith** FN-F10 FN-F10 FN-F2 FN-F2 FN-F1 FN-F1 Zeos** Ctrl-Shift-D FN-F1Ctrl-Shift-D FN-F1 ComputerKey command to activate portKey command to de-activate port
57 Using Video Mirroring with a PowerBook Computer When you turn video mirroring (called SimulScan in newer Pow- erBooks—see below) on, the projector displays the same informa- tion that appears on your PowerBook’s built-in screen. When video mirroring is off, the projector acts like a separate display. To turn on video mirroring for the first time: 1Open the Monitors control panel; click on Monitor 2. 2Set the number of colors you want. 3Open the Control Strip, then click on the monitor icon. 4Select “Turn Video Mirroring On.” Now you can turn video mirroring on and off from the Control Strip without having to open the Monitors control panel again. When using video mirroring and high color graphics such as slide shows, the projected image occasionally might turn black and white. If this happens, perform the following steps: 1Turn off video mirroring. 2Open the Monitors control panel. 3Move the white menu bar to Monitor 2 to set the projector as the primary monitor. 4Restart the PowerBook. Using SimulScan Some newer PowerBooks display images on an external monitor or projector differently than previous ones. When using SimulScan, the projector displays the same information that appears on your PowerBook To select SimulScan: 1Open the Control Panel, then double-click Monitors and Sound. 2In the Resolution list, choose the SimulScan mode, then click OK. 3If this changes your display settings, a dialog box appears. Click OK to confirm the change.
59 RS232 Terminal Specifications Communication configuration To control the projector from an LCD control panel or terminal software, connect a null modem type RS232 cable and set your computer ’s serial port settings to match this communication con- figuration: Here are the pinouts of the RS232 connector (outputs and inputs are relative to the projector): Command format All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request (indicated by a “?”) or a write request (indicated by 1 to 4 ASCII digits). A read request format: (AAA?) where ( starts the command AAA denotes the command ? denotes the read request )ends the command Setting Value Bits per second 19,200 Data bits 8 Parity None Stop bits 1 Flow control None Emulation VT100 1. Not used 6. Not used 2. Receive data (input)7. Ready to send (output) 3. Transmit (output) 8. Not used 4. Not used 9. Not used 5. Ground 96 51
60 Appendix A read command returns the range and the current setting, for example: A write request example: (AAA####) where ( starts the command AAA denotes the command #### denotes the value to be written (leading zeros not necessary) )ends the command NOTE: To assure the projector can process a command, wait 3 seconds before entering the next command. Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is auto- matically set to the maximum number for that function. If a com- mand is received that is not understood, a “?” is returned. With absolute settings, “0” is off, 1-2147483647 is on. The one exception is the Power command, where 0 is off and 1 is on. Supported commandsFunction Command Response Brightness (BRT?) (0-22, 10) Volume (VOL?) (0-80, 0) Lamp hours (LMP?) (0-9999, 421) Function Command Response Brightness (BRT10) Sets the brightness to 10 Freeze (FRZ1) Freezes the display Power (PWR0) Turns power off Power (PWR1) Turns power on Power (PWR9999) ? FunctionComma nd Range Power PWR 0-1 Lamp Hours (Read only) LMP 0-9999 Standby STB 0-1 Freeze FRZ 0-1