Dukane Imagepro 8931w Projector Users Manual

1
ENGLISH
WARNING  ►Before using this product, be sure to read all manuals for this 
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.\
►Follow all the instructions in the manuals or on the product.

First of all ............................................ 2
  Entries and graphical symbols explanation ...... 2
  Important safety instruction .............................. 2
Regulatory notices...

2
First of  all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and\
 the 
product as follows, for safety purpose. Please know their meanings befor\
ehand, 
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. \
Be sure to 
follow them always when handling the product. The manufacturer assumes no 
responsibility for any damage caused by mishandling that is beyond norma\
l usage...

3
ENGLISH
Regulator y notices
About Electro-Magnetic InterferenceIn CANADA
This Class B digital apparatus complies with Canadian ICES-003.
In the US, and other places where the FCC regulations are applicable
Declaration of Conformity Trade name  HITACHI/DUKANE
Model Number    CP-X2015WN/8755N, CP-X2515WN/8928, CP-X3015WN/8930 
                         CP-X4015WN /8937, CP-WX2515WN/8929W,

 CP-WX3015WN/8931W
Responsible Party  Hitachi America, Ltd.
Address  900 Hitachi way, Chula Vista, CA 91914-3556...

4
NOTE  • Keep the original packing materials for future reshipment. Be sur\
e 
to use the original packing materials when moving the projector. Use special 
caution for the lens.
• The projector may make a rattling sound when tilted, moved or shaken, si\
nce 
a fl ap to control the air fl ow inside of the projector has moved. Be aware that 
this is not a failure or malfunction.
About Waste Electrical and Electronic Equipment
The mark is in compliance with the Waste Electrical and Electronic 
Equipment...

5
ENGLISH
Preparing for the remote control
Please insert the batteries into the remote control before using it. If \
the remote  
control starts to malfunction, try to replace the batteries. If you will\
 not use the 
remote control for long period, remove the batteries from the remote con\
trol and 
store them in a safe place.
1. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(
HITACHI MAXELL or HITACHI MAXELL 
ENERGY, Part No.LR6 or R6P
) according 
to...

6
WARNING  ►Install the projector where you can access the power outlet 
easily.
►Install the projector in a stable horizontal position.
•  Do not use any mounting accessories except the accessories specified b\
y the  manufacturer. Read and keep the manuals of the accessories used.
•  
For special installation such as ceiling mounting, be sure to consult yo\
ur dealer 
beforehand. Specific mounting accessories and services may be required\
.
• Do not put the projector on its side, front or rear position....

7
ENGLISH
Connecting with your devices
Before connecting the projector to a device, consult the manual of the d\
evice to 
confirm that the device is suitable for connecting with this projector\
 and prepare 
the required accessories, such as a cable in accord with the signal of t\
he device. 
Consult your dealer when the required accessory did not come with the pr\
oduct or 
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform the 
connection, according...

8
Connecting power supply
1. Put the connector of the power cord into the 
AC IN (AC inlet) of the projector.
2. Firmly plug the power cord’s plug into the 
outlet. In a couple of seconds after the power 
supply connection, the  POWER indicator will 
light up in steady orange.
Please remember that when the DIRECT POWER 
ON function activated, the connection of the power 
supply make the projector turn on.
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty...

9
ENGLISH
Turning on the power
1. Make sure that the power cord is firmly and correctly connected to the\
 
projector and the outlet.
2. Make sure that the POWER indicator is 
steady orange. Then remove the lens 
cover.
3. Press the STANDBY/ON button on the 
projector or the remote control.
The projection lamp will light up and the 
POWER indicator will begin blinking in 
green. When the power is completely on, the 
indicator will stop blinking and light in steady 
green.
WARNING  ►A strong light is...

10
Adjusting the projector’s elevator
When the place to put the projector is slightly uneven to 
the left or right, use the elevator feet to place the projector 
horizontally. Using the feet can also tilt the projector 
in order to project at a suitable angle to the screen, 
elevating the front side of the projector within 14 degrees.
This projector has 2 elevator feet and 2 elevator buttons. 
An elevator foot is adjustable while pushing the elevator 
button on the same side as it.
1. 
Holding the...