Dukane Imagepro 8915 Lcd Projector Users Manual

19

Operating
Using the automatic adjustment feature
1. Press the AUTO button on the remote control.  
 At a RGB signal 
The vertical position, the horizontal position, the clock 
phase and horizontal size will be automatically adjusted. 
Make sure that the application window is set to its maximum size prior to 
attempting to use this feature. A dark picture may still be incorrectly adjusted. 
Use a bright picture when adjusting.
 At a video signal 
The video format best suited for the respective...

20

Using the magnify feature
1. Press the ON button of MAGNIFY on the remote control.   
The “MAGNIFY” indication will appear on the screen 
(although the indication will disappear in several seconds 
with no operation), and the projector will enter the MAGNIFY 
mode.
2. Use the cursor buttons ▲/▼ to adjust the zoom level. 
To move the zoom area, press the POSITION button in the MAGNIFY mode, 
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the 
zoom area, press the POSITION button...

21

Freezing the screen
1. Press the FREEZE button on the remote control.  
The “FREEZE” indication will appear on the screen, and 
the projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal, 
press the FREEZE button again. 
● The projector automatically exits the FREEZE mode when the input signal  changes, or when one of the projector’s buttons or the remote control buttons 
of STANDBY/ON, ONE TOUCH, RGB, VIDEO, BLANK, AUTO,ASPECT, 
VOLUME, MUTE, KEYSTONE,...

22

Operating the computer screen
CAUTION  ►Mistaken use of the mouse/keyboard control could damage 
your equipment. 
• While using this function, please connect only with a computer. 
• Before connecting, read the manuals of the computer you will connect. 
NOTE  • It may not be possible to control notebook PC, and other computers with 
built-in pointing device (e.g. track ball), using this remote control. In this case, before 
connecting go into BIOS (system setup) and select external mouse, and...

23

Operating
STANDBY/ONVIDEOUPDOWNBLANK
ASPECTPUSH
LASERINDICATOR
LASER
RGB
ENTER
ONOFF
ESCPOSITIONMAGNIFYMUTEKEYSTONEFREEZEONE TOUCH
AUTO PA
GE
MENURESETVOLUME
Multifunctional settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, VIDEO Qlty
., INPUT, SETUP, 
SCREEN, OPTION, NETWORK and EASY MENU. Each of these menus is operated using 
the same methods. The basic operations of these menus are as follows.
1. Press the MENU button on the remote control or one of 
the...

24

Multifunctional settings
EASY Menu
ItemDescription
ASPECTUsing the buttons ◄/► switches the mode for aspect ratio. 
See the item ASPECT of section IMAGE menu
 (29).
MODE
Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA and 
a mode of COLOR TEMP. Choose a suitable mode according to the projected source.
NORMAL 
  CINEMA  DYNAMIC       
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2...

25

Multifunctional settings
ItemDescription
MIRRORUsing the buttons ◄/► switches the mode for mirror status.
See the item MIRROR of section SETUP menu (34).
RESETPerforming this item resets all of the items of EASY MENU except 
FILTER TIME and LANGUAGE. 
A dialog is displayed to make sure. Selecting RESET using the 
button ▲ performs reset.
FILTER TIME Performing this item resets the filter timer which counts use time of 
air filter.
A dialog is displayed to make sure. Selecting RESET using the 
button...

26

Multifunctional settings
PICTURE Menu
ItemDescription
BRIGHTUsing the buttons ▲/▼ adjusts the brightness. :    Light  Dark
CONTRASTUsing the buttons ▲/▼ adjusts the contrast. :    Strong  Weak
GAMMA
Using the buttons ▲/▼ switches the GAMMA mode.
#1 DEFAULT 
  #1 CUSTOM  #2 DEFAULT 
#3 CUSTOM
  #3 DEFAULT  #2 CUSTOM
To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM
Selecting a mode of CUSTOM and then pressing the button ► or the ENTER button displays a dialog to aid you in adjusting the mode. This...

27

Multifunctional settings
ItemDescription
COLOR TEMP
Using the buttons ▲/▼ switches the mode of color temperature.
HIGH  MIDDLE  LOW  CUSTOM     
To adjust CUSTOM
Selecting the CUSTOM and then pressing the button ► or the ENTER button displays a dialog 
to aid you in adjusting the OFFSET and/or GAIN 
of CUSTOM mode.
OFFSET adjustments change the color intensity 
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity 
on the brighter tones of the test pattern.
Choose...

28

Multifunctional settings
ItemDescription
MY MEMORY Selecting a mode of MY MEMORY using the buttons ▲/▼ and then 
pressing the button ► or the ENTER button performs each function.
LOAD1  LOAD2  LOAD3  LOAD4
SAVE4 
 SAVE3  SAVE2  SAVE1
This projector has 4 numbered memories for adjustment data.  Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the c
ommand’s 
number, and adjusts the picture automatically depending on the data. Performing the...