Dukane Imagepro 8914 Lcd Projector Users Manual

							
29

Multifunctional settings
ItemDescription
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large Small
• This item can be selected only for an RGB signal.
•When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation.
AUTO ADJUST EXECUTE
Selecting this item performs the automatic adjustment feature.
For an RGB signalThe vertical position, the horizontal position, the clock phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected.Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
For a For a Forvideo signal or s-video signalThe video format best suited for the respective input signal will be selected automatically.This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu. For a component video signal, the signal type is identifi ed automatically independently of this function.For a video signal, s-video signal or component video signalThe vertical position and horizontal position will be automatically adjusted.
For a component video signalThe aspect ratio will be automatically selected.The clock phase will be automatically adjusted.
•The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.
IMAGE Menu (continued) 
						

							
30

Multifunctional settings
INPUT Menu
ItemDescription
COLOR SPACE
Using the buttons ▲/▼ switches the mode for color space. 
AUTO  RGB  SMPTE240  REC709  REC601      
•This item can be selected only for an RGB signal or a component video signal(except signals of 525i(480i)/625i(576i) from the component video port).
•The AUTO mode automatically selects the optimum mode. 
•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.
COMPONENT
Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port.
COMPONENT SCART RGB 
When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer.
VIDEO FORMAT
Using the buttons ▲/▼ switches the mode for video format.
AUTO  NTSC    PAL  SECAM 
      N-PALM-PAL NTSC4.43 
•This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identifi ed automatically independently of this function.
•The AUTO mode automatically selects the optimum mode.
•The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), 
please select the mode depending on the input signal.
With  the  INPUT  menu,  the  items  shown  in  the  table  below 
can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
 MENU [RGB]
 IMAGE
 SETUP
 PICTURE
 INPUT
 OPTION EASY MENU
 SCREEN
   :SELECT
 VIDEO FORMAT AUTO
 COLOR SPACE  AUTO
 INFORMATION
 COMPONENT    COMPONENT 
						

							
31

Multifunctional settings
INPUT Menu (continued)
ItemDescription
INFORMATION
Selecting this itemdisplays a dialog titled “INPUT INFORMATION”. It shows the information about the current input.
INPUT-INFORMAINPUT-INFORMAINPUTTION-INFORMATION-INFORMARGB1024x768 @60.0FRAME LOCK
INPUT-INFORMAINPUT-INFORMAINPUTTION-INFORMATION-INFORMAS-VIDEOSECAMAUTO
INPUT-INFORMAINPUT-INFORMAINPUTTION-INFORMATION-INFORMACOMPONENT576i @50SCART RGB
•The “FRAME LOCK” message on the dialog means the frame lock function is working. This function automatically works when a RGB signal with vertical frequency of 50 to 60 Hz is input, and it displays a moving picture more smoothly.
•The “SCART RGB” message means the COMPONENT VIDEO 
port is working as a SCART RGB input port. Please refer to the  port. Please refer to the  port. Please refer
COMPONENT item in this menu.(30)
•This item can't be selected for no signal and sync out.for no signal and sync out.for 
						

							
32

Multifunctional settings
SETUP Menu
ItemDescription
WHISPER
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL  WHISPER
•When the WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL  H:INVERT  V:INVERT  H&V:INVERT
VOLUMEUsing the buttons ▲/▼ adjusts the volume.
HighLow
AUDIO
Choose an input port using the buttons ▲/▼ (1), then select the audio port to be interlocked with the input port using the buttons ◄/► (2). When off is selected, both of two audio ports do not work for the input port.
(1)  RGB1  RGB2  COMPONENT  S-VIDEO  VIDEO
(2)  1  2 
With the SETUP menu, the items shown in the table below 
can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
 MENU [RGB]
 IMAGE
 SETUP
 PICTURE
 INPUT
 OPTION EASY MENU
 SCREEN
   :SELECT
 WHISPER      NORMAL MIRROR       NORMAL
 AUDIO  VOLUME       16
 AUDIO
  
 RGB2
   QUIT
 RGB1
 S‑VIDEO VIDEO
 COMPONENT
1   2 
						

							
33

Multifunctional settings
SCREEN Menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI  POLSKI  TÜRKÇE
ENGLISH  FRANÇAIS  DEUTSCH ESPAÑOL ESPAÑOL ESP ITALIANO
NORSK  NEDERLANDS  PORTUGUÊS 日本語
                 SVENSKA                
日本語
                            
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.To quit the operation, press the MENU button on the remote control or keep no operation for 10 seconds.
OSD BRIGHT.
Using the buttons ▲/▼ switches the brightness level of the OSD (On Screen Display).
BRIGHT  DARK
BLANK
Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature
(21). It is displayed by pressing the BLANK button on the remote control.
MyScreen  ORIGINAL BLUE WHITE BLACK
  
MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several 
minutes.
•For the MyScreen, please refer to the MyScreen item(34).
With  the  SCREEN  menu,  the  items  shown  in  the  table 
below can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
 MENU [RGB]
 IMAGE
 SETUP
 PICTURE
 INPUT
 OPTION EASY MENU
 SCREEN
   :SELECT
 LANGUAGE      ENGLISH MENU POSITION
 START UP      ORIGINAL
 OSD BRIGHT.   5
 MyScreen MyScreen Lock TURN OFF MESSAGE       TURN ON
 BLANK         BLACK 
						

							
34

Multifunctional settings
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen  ORIGINAL  TURN OFF
    
MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used.
•To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several 
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen.
•For the MyScreen, please refer to the item MyScreen below. For
the BLANK screen, please refer to the BLANK item(33).
MyScreen
This item functions for capturing the MyScreen of the blank screen and the start-up screen. Please execute displaying the input including the picture you want to capture.
1.  Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing the picture from the current screen. Please wait for the target picture to be displayed, and press the ENTER button on the remote control when the picture is displayed. The picture will freeze and the frame for capturing appears.     To stop performing, press the RESET or ESC button on the remote control. 
2.  Using the buttons ◄/►/▲/▼ adjusts the frame position. Please 
move the frame to the position of the picture which you want to use.     To start registration, press the ENTER button on the remote control.     To restore the screen and return to the previous dialog, press the RESET or ESC button on the remote control.
Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen registration is fi nished.” are displayed for several seconds. If the registration failed, the message “A capturing error has occurred. Please try again.” is displayed.
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON  TURN OFF
When the TURN ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.
SCREEN Menu (continued) 
						

							
35

Multifunctional settings
ItemDescription
MESSAGE
Using the buttons ▲/▼ turns on/off the message function.
TURN ON  TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting”NO INPUT IS DETECTED””SYNC IS OUT OF RANGE”"Searching….” while searching for the input”Detecting….” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ration displayed by changingThe indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button.•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfurction (21).
SCREEN Menu (continued) 
						

							
36

Multifunctional settings
OPTION Menu
ItemDescription
AUTO SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal search function.
TURN ON  TURN OFF
This function works with INPUT, RGB, and VIDEO buttons.When the TURN ON is selected, detecting no signal automatically cycles through input ports in the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image.RGB IN1 RGB IN2 COMPONENT VIDEO  S-VIDEO  VIDEO    
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
AUTO OFFENABLE1
AUTO OFFDISABLE0
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will go off and the power indicator begins blinking. Please refer to the section “Turning off the power”(16).
LAMP TIME
The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp.Pressing the RESET button on the remote control or the button ► of the projector displays of the projector displays of the projectora dialog. To reset the lamp time, select the RESET using the button ▲.
RESET  CANCEL
•Please reset the lamp time only when you have replaced the lamp,for a corresponding message about the lamp.•For the lamp For the lamp Forreplacement, see the section "Lamp" (38, 39).
FILTER TIME
The fi lter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air fi lter.Pressing the RESET button on the remote control or the button ► of the projector displays a dialog. To reset the fi lter time, select the RESET using the button ▲.
RESET  CANCEL
•Please reset the fi lter time only when you have cleaned or replaced cleaned or replaced cleaned orthe air fi lter, for a corresponding message about the air fi lter.•For the For the Forair fi lter cleaning,see the section "Air fi lter"(40).
With  the  OPTION  menu,  the  items  shown  in  the  table  below  can be performed. 
Select  an  item  using  the  cursor  buttons  ▲/▼  on  the  projector  or remote  control, and  press  the  cursor  button  ►  on  the  projector or  remote  control,  or  the  ENTER  button  on  the  remote  control  to execute  the  item,  except  for  the  items  LAMP  TIME  and  FILTER TIME. Then perform it referring to the following table.
 MENU [RGB]
 PICTURE
   :SELECT
 
 IMAGE
 SETUP INPUT
 OPTION EASY MENU
 SCREEN
 AUTO OFF      0 LAMP TIME     0 FILTER TIME   0
 AUTO SEARCH  TURN OFF
 SERVICE 
						

							
37

Multifunctional settings
ItemDescription
SERVICE
Selecting this item displays the SERVICE menu.Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item.FAN SPEEDAUTO ADJUST GHOSTKEY LOCKFILTER MESSAGFACTORY RESET       FAN SPEEDUsing the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc.Note that the projector is noisier when the HIGH is selected.
HIGH NORMAL
AUTO ADJUSTUsing the buttons ▲/▼ enables/disablesthe automatic adjustment.When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
ENABLEDISABLE
•Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly.  In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually.
GHOST1.  Select a color element of ghost using the buttons ◄/►. 2.  Adjust the selected element using the buttons ▲/▼ to disappear ghost.2.  Adjust the selected element using the buttons ▲/▼ to disappear ghost.2.  
KEY LOCKUsing  the  buttons ▲/▼  turns  on/off  the  key  lock  feature.  When  TURN  ON  is selected, the buttons on the projector except the STANDBY/ON button are locked.TURN ON  TURN OFF•Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
FILTER MESSAGEUse the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air fi lter. 100h  200h  300h  TURN OFF  50hAfter selecting “50h”, 100h”, “200h”, or “300” , the message “CLEAN THE AIR FILTER” will appear after the timer reaches the interval time set by the menu. Please refer to the “FILTER TIME” item (36) and the table “Related message” (42)When the “TURN OFF” is chosen, the air-fi lter cleaning message will not appear. •Please check and clean the air fi lter periodically, even if there is no message. If the air fi lter becomes blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.•It is recommended to choose “100h” in general.  Please be careful with the operating environment of the projector and the condition of air fi lter, especially when the “200h”, “300h” or “TURN OFF” is chosen.
FACTORY RESETSelecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Notethat the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
RESET  CANCEL
OPTION Menu (continued) 
						

							
38

Maintenance
Maintenance
Lamp
 WARNINGHIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE
►The  projector  uses  a  high-pressure  mercury  glass  lamp.  The  lamp  can break 
with  a  loud  bang,  or  burn  outwith  a  loud  bang,  or  burn  out,  if  jolted  or  scratched,  handled  while  hot,  or  worn over  time.  Note  that  each  lamp  has  a  different  lifetime,  and  some  may  burst  or burn  out  soon  after  you  start  using  them.  In  addition,  when  the  bulb  bursts,  it  is possible  for shards  of  glassshards  of  glass  to  fl y  into  the  lamp  housing,  and  for gas  containing gas  containing mercurymercury to escape from the projector’s vent holes.
►About disposal of a lamp • This product contains a mercury lamp; do not 
put it in a trash. Dispose of it in accordance with environmental laws.For lamp recycling, go to www.lamprecycle.org. (in the US) For product disposal, contact your local government agency or www.eiae.org (in the US) or www.epsc.ca (in Canada). For more information, call your dealer.
• If the lamp should break (it will make a loud bang when it does), unplug 
the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the inside of the projector, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.•  If  the  lamp  should  break  (it  will  make  a  loud  bang  when  it  does), ventilate  the  room  well,  and  make  sure  not  to  breathe  the  gas  that comes out of the projector vents, or get it in your eyes or mouth.• Before replacing the lamp, turn the projector off and unplug the power cord,  then  wait  at  least  45  minutes  for  the  lamp  to  cool  sufficiently. Handling  the  lamp  while  hot  can  cause  burns,  as  well  as  damaging  the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
•  Do  not  open  the  lamp  cover  while  the  projector  is  suspended  from the  ceiling.  This  is  dangerous,  since  if  the  lamp’s  bulb  has  broken,  the shards  will  fall  out  when  the  cover  is  opened.  In  addition,  working  in high  places  is  dangerous,  so  ask  your  local  dealer  to  have  the  lamp replaced even if the bulb is not broken.• Do not use the projector with the lamp cover removed. To replace the lamp,  make  sure  that  the  screws  are  tightened  firmly.  Loose  screws could result in damage or injury.
• Use only the lamp of the specifi ed type.
•  If  the  lamp  breaks  soon  after  the  first  time  it  is  used,  it  is  possible that  there  are  electrical  problems  elsewhere  besides  the  lamp.  If  this happens, contact your local dealer or a service representative.• Handle with care: jolting or scratching could cause the lamp bulb to bur st during use.•  If  the  indicators  or  a  message  prompt  you  to  replace  the  lamp  (see the  section  "Related  Messages"  and  "Regarding  the  indicator  Lamps"), replace  the  lamp  as  soon  as  possible.  Using  the  lamp  for  long  periods 
of time, or passing the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.
Disconnect the plug from the power outlet