Dukane Imagepro 8913-W Lcd Projector Users Manual

9
ENGLISH

INPUT button
VOLUME button
MUTE button
▲ cursor button
▼ cursor button
Displaying the picture
. Activate your signal source. Turn the signal 
source on, and make it send the signal to 
the projector.
2. To adjust volume, use the ▲/▼ cursor 
buttons after pressing the VOLUME button 
on the remote control.  
To have the projector silent, press the MUTE 
button on the remote control.
3. Press the INPUT button on the projector.  
Each time you press the button, the 
projector switches its...

0

HOMEPAGE UPPAGE DOWNEND
VIDEOSEARCH
FREEZEOFFONMAGNIFYASPECTAUTOBLANKMUTEVOLUMEKEYSTONEMY BUTTONPOSITION1 2
ESCENTERMENURESET
COMPUTER

STANDBY/ON buttonPOWER indicator
Power switch
Turning off  the power
. Press the STANDBY/ON button on the projector 
or the remote control.
The message "Power off?" will appear on the 
screen for about 5 seconds.
2. Press the STANDBY/ON button again while the 
message appears. 
The projector lamp will go off, and the POWER 
indicator will begin...


ENGLISH

Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact to your dealer and tell the lamp type number.

Type number : 456-8755G
. Turn the projector off, and unplug the power cord....

2

 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, 
and for gas containing mercury to escape from the projector’s...

3
ENGLISH

Please check and clean the air filter periodically. When the indicators or a 
message prompts you to clean the air filter, comply with it as soon as possible. 
Replace the air filter when it is damaged or too soiled. To prepare a new air filter, 
contact to your dealer and tell the air filter type number.
Type number : MU04951
When you replace the lamp, please replace the air filter. An air filter of specified 
type will come together with a replacement lamp for this projector .
....

4

WARNING  ►Always handle the batteries with care and use them only as 
directed. Battery may explode if mistreated. Do not recharge, disassemble or 
dispose of in fire. 
And also improper use may result in cracking or leakage, which could result in 
fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. 
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets. If...

5
ENGLISH

Using the CD manual
The other manuals for this product are written into the included CD-ROM titled 
“User’s Manual (detailed)”. Before using the CD-ROM, please read the following 
to ensure the proper use. 
 System requirements
The system for using the CD-ROM requires the following. 
  Windows®:   OS:Microsoft® Windows® 98, 98SE, NT4.0, Me, 2000/XP, or 
later
  CPU:Pentium® processor 133MHz / Memory:32MB or more
  Macintosh®: OS:Mac OS 10.2 or later
  CPU:Power PC® / Memory:32MB or more...

6

Regulator y notices
Declaration of Conformity
Trade name   HITACHI
Model Number  CP-X417
Responsible Party  Hitachi America, Ltd.
Address  900 Hitachi way, Chula Vista, A 91914-3556  U.S.A.
Telephone Number  +1 -800-225-1741
This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired...

7
ENGLISH

Information for users applicable in European Union countries
The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link11g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Regulatory notices (continued)
For using with a wireless LAN
FCC Important note
To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance...

8

Specifications
ItemSpecifications
Product nameLiquid crystal projector
Liquid Crystal Panel
Panel size1.6 cm (0.63 type)
Drive systemTFT active matrix
Pixels786,432 pixels (1024 horizontal x 768 vertical)
LensZoom lens   F=1.6 ~ 1.8   f = 18.9~ 22.6 mm   (approximately)
Lamp220W UHB
Audio output7 W
Power supplyAC 100-120V/3.8A, AC220-240V/1.6A
Power consumption350W
Temperature range5 ~ 35°C (Operating)
Size340 (W) x 117 (H) x 270 (D) mm    *Excluding protrusionsPlease refer to the following...