Dukane Imagepro 8912h Projector Users Manual



ENGLISH
Projector 
8755H/8916/8913H/8912H 
User's Manual (concise)
Thank you for purchasing this projector.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. See “Using the CD manual”  (
 15) to read the manuals in the CD. 
After reading them, store them in a safe place for future reference.

Contents of package...........................
Preparations   .......................................2
  Fastening the lens cover...

2

Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover 
to the projector using the enclosed strap.
. Fix the strap to the strap hole of the lens cover. 
Thread one end of the strap through the strap hole of 
the lens cover and make the loop at the end, and let the 
other end of the strap through the loop. Not have a knot 
in the strap at either end.
2. Fix the strap to the strap hole of the projector. Thread 
the other end of the strap through the strap hole of the...

3
ENGLISH

On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more between 
the sides of the projector and other objects 
such as walls.
• Consult with your dealer before a special 
installation such as suspending from a ceiling.
WARNING  ►Install the projector in a stable horizontal position.
►Place the projector in a cool place, and ensure that there is sufficient ventilation.
►Do not place the projector anyplace where it may get wet.
CAUTION  ►Avoid placing the projector in...

4

Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. 
Make sure that all the devices are suitable to be connected with this product, and 
prepare the cables required to connect. Please refer to the following illustrations 
to connect them.
WARNING  ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION  ►Turn off all devices and unplug their power cords prior to...

5
ENGLISH

Connecting power supply
. Put the connector of the power cord into the 
AC inlet of the projector.
2. Firmly plug the power cord’s plug into the 
outlet. 
WARNING  ►Please use extra caution when connecting the power cord, as 
incorrect or faulty connections may result in fire and/or electrical shock.
• Only use the power cord that came with the projector. If it is damaged, contact 
to your dealer to newly get correct one.
• Only plug the power cord into an outlet whose voltage is matched...

6

Adjusting the projector's elevator
When the place to put the projector is slightly uneven to 
the left or right, use the elevator feet to place the projector 
horizontally. 
Using the feet can also tilt the projector in order to project at a suitable angle to 
the screen, elevating the front side of the projector within 10 degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is 
adjustable while pushing the elevator button on the same side as it.
. Holding the...

7
ENGLISH

Displaying the picture
. Activate your signal source. Turn the signal 
source on, and make it send the signal to 
the projector.
2. Use the VOLUME +/VOLUME - buttons to 
adjust the volume.  
To have the projector silent, press the MUTE 
button on the remote control.
3. Press the INPUT button on the projector.  
Each time you press the button, the 
projector switches its input port in turn.
You can also use the remote control to 
select an input signal. Press the VIDEO 
button for...

8

VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTEMY BUTTONPOSITION1 2
ESCENTERMENU
RESET
COMPUTERMY SOURCE/AUTOMAGNIFYPAGE      UPVOLUMEDOWNoONOFF9×FREEZE

Turning off  the power
. Press the STANDBY/ON button on the projector 
or the remote control.
The message "Power off?" will appear on the 
screen for about 5 seconds.
2. Press the STANDBY/ON button again while the 
message appears. 
The projector lamp will go off, and the POWER 
indicator will begin blinking in orange. Then the 
POWER...

9
ENGLISH

Replacing the lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact to your dealer and tell the lamp type number.
Type number : 456-8755H
. Turn the projector off, and unplug the power cord. 
Allow the...

0

 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, 
and for gas containing mercury to escape from the projector’s...