Dukane Imagepro 8806 Portable Lcd Projector Users Manual

21
2. Installation and Connections
Inserting the PC Card
1. Make sure the main power is off before inserting the PC card. (This step is needed only when the wirelessLAN card being inserted into the projectors PC CARDslot)
2. Hold the PC card horizontally and insert it slowly into the PC card slot with its top facing up.
The eject button pops out once the PC card is fully inserted.
Check that the PC card is fully inserted.
NOTE: Do not try to force the PC card into the slot or you may bend
the pins...

22
SELEC TSELEC TSELEC T
2. Installation and Connections
NOTE: Some PC cards cannot be used based on their size and shape.
PC Card Type
The PC Card slot accepts PCMCIA Type II only.
NOTE: The projector does not support NTFS formatted flash memory card or USB memory device.
Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system.To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with...

23
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cables three-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cable in the wall outlet.
P C C AR
DLA M
PSTA TU SPO
W ERO N/S TA N D B YSO URCE
A
U TO  A D JU ST
3 D  R EFO RM
SELEC T
P
C C AR
D
L A M
P
S TA TU S
P O W
ERO N/S TA N D B YSO URCE
A
U TO  A D JU ST
3 D  R EFO RM
Make sure that the prongs are...

24
OFF
VIDEO
S-VIDEO VIEWER
LAN
COMPUTER
COMPONENT
ON
SELECT
POWERPOWER
MENU
ENTEREXIT
3
1
2
POWERON/STAND BY
PC CARDLAMPSTATUSSOURCE
AUTO ADJUST
3D REFORM
3. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a pic\
ture onto the screen.
  Turning on the Projector
NOTE:
• The projector has two power switches: a main power switch and a POWER (ON/STAND BY) button (POWER ON and OFF on the remote control).
• When plugging in or unplugging the supplied...

25
OFF
VIDEO
S-VIDEO VIEWER
LAN
COMPUTER
COMPONENT
ONPOWERPOWER
MENU
ENTEREXIT
3
1
2
SELECT
3. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one
of the 21 menu languages.
To select a menu language, follow these steps:
1. Use the SELECT  button to select one of the 21 lan-
guages for the menu.
2. Press the ENTER button to execute the selection....

26
3. Projecting an Image (Basic Operation)
 Selecting a Source
Selecting the computer or video source
Detecting the Signal Automatically
Press and hold the SOURCE button for a minimum of 1 second, the projecto\
r will
search for the next available input source. Each time you press and hold\
 the
SOURCE button for a minimum of 1 second, the input source will change as\
follows:
Computer1  → Computer2  → Computer3  → Component  → Video  → S-Video  →
Viewer  → Computer1  → ...
If no input signal is...

27
3. Projecting an Image (Basic Operation)
Use the lens shift dials, the adjustable tilt foot levers, the zoom leve\
r or the focus ring to adjust the picture size and
position.
 Adjusting the Picture Size and Position
PC  CARDLAM PSTATU SPOWERO
N/S TA N D B YSO URCE
A
U TO  A D JU ST
3 D  R EFO RMSELECTPC  CARD
LAM P
STATU S
POW ERO
N/S TA N D B YSO URCE
A
U TO  A D JU ST
3 D  R EFO RM
PC  CAR DLAMPSTATU SPOW ERO
N
/S TA N
D B YSO U
RCE
A
U
TO  A D JU
ST
3 D  R EFO RMSE LECTPC  CAR D
LA MP
ST ATU S...

28
3. Projecting an Image (Basic Operation)
Adjusting the position of a projected image
• Rotate the lens shift dial.
P C C AR DLA M PSTA TU SPO W E
RO N/S TA N D B YS
O URCE
A
U TO  A
D JU
ST
3 D  R
EFO
RMSELEC T
PC C AR D
L A M P
S TA TU S
P O W ERO N/S TA N D B YS
O URCE
A
U TO  A
D JU
ST
3 D  R
EFO
RM
LENS SHIFT
LEFT RIGHT
DOW N
UP
Desktop front projection
Ceiling front projection Vertical shift
Vertical shift
Max. 0.5V
Max. 
0.5V 1V 0.5V
0.1H 0.1H
1H
Width of projected image
Nomal projection...

29
3. Projecting an Image (Basic Operation)
Adjusting the focus (Focus ring)
• Rotate the focus ring to make focus adjustment.
P C C AR DLA M PSTA TU SPO W ERO N/S TA N D B YS
O URCE
A
U TO  A
D JU ST
3 D  R
EFO RMSELEC T
PC C AR D
L A M P
S TA TU S
P O W ERO N/S TA N D B YS
O URCE
A
U TO  A
D JU ST
3 D  R
EFO RM
LENS RELEASE
Focus ring
Finely adjusting the size of an image (Zoom lever)
• Rotate the zoom lever to adjust the image size on the screen.
LENS RELEASE
PC 
C AR DL
A M PSTA TU SPO W ERON/STAND...

30
Adjusting the Tilt Foot
1. Lift the front edge of the projector.
CAUTION:
Do not try to touch the ventilation outlet during Tilt Foot adjustment as
it can become heated while the projector is turned on and during its
cool down period after it is turned off.
2. Push up the Adjustable Tilt Foot Levers on the right and left sides
of the projector to extend the adjustable tilt feet (maximum height).
3. Lower the front of the projector to the desired height. 4. Release the Adjustable Tilt Foot lever to...