Dukane Imagepro 8784 Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8784 Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
5 MIU Menu (continued) MIU Menu ItemDescription SETUP(continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your PC. If unsure, consult your IT manager. Use the ◄ button to return to the menu after setting the TIME DIFFERENCE. DATE AND TIME Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time...
Page 52
5 MIU Menu (continued) MIU Menu 06914-/1&9+4.559+4& 52& /#761 // / // / // // / ItemDescription SETUP(continued) SPEED Use the ▲/▼ buttons to select the transfer rate.(M : Mbps : Megabits per second) AUTOó54Mó48Mó36Mó 4Mó 8M ô ô M ó Mó5.5Mó6Mó9Mó Mó M • The AUTO mode automatically selects the optimum rate.• Transfer rates may change due to the network situation. NETWORK MODE Use the ▲/▼ buttons to select...
Page 53
53 MIU Menu ItemDescription INFORMATION Selecting this item displays the MIU-INFORMATION dialog for confirming the network settings. • Only the first 16 characters of the projector name are displayed.• Nothing (blank) is shown in the “NAME” and “SSID” field until you setup those items. For setup, please refer to 2.5.2 Network Settings of User’s Manual - Network Functions.• When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date...
Page 54
54 MIU Menu ItemDescription SERVICE Selecting this item displays the SERVICE menu.Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. REMOVE ALL, REMOVE SD CARD, REMOVE USBChoose one of the following items either “REMOVE ALL”, “REMOVE SD CARD” or “REMOVE USB” that matches a media to be taken out, from projector, when you remove the SD Memory Card or USB memory. Use the ▲ button to perform the procedure to remove the media.EXECUTE CANCELThe...
Page 55
55 Maintenance Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number : 456-8770 Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the...
Page 56
56 Maintenance Lamp (continued) Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing...
Page 57
57 Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Replace the air filter when it is damaged or too soiled. To prepare a new air filter, contact your dealer and tell the air filter type number. Type number : MU03602 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. Cleaning the air filter...
Page 58
58 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector has cooled adequately, pull the slot cover forward, pushing slightly its edge up, and remove it from the projector. 3. Remove the battery case. Hold the battery case gutter by finger nail or other thing and pull out the battery case slowly from the battery slot. 4. Take the old battery out from the battery case. 5. Replace a new battery. Replace battery with...
Page 59
59 Maintenance Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe...
Page 60
60 Troubleshooting If an abnormal operation should occur, stop using the projector immediately. Troubleshooting Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Related messages When some message appears, check and cope with it according to the following table. Although these messages...