Dukane Imagepro 8783 Projector Users Manual



ENGLISH
DUKANE Projector
8783
User's Manual (concise)
Thank you for purchasing this projector.
WARNING  ►Before using this product, be sure to read all manuals for this 
product. See “Using the CD manual”  (
 2) to read the manuals in the CD. After 
reading them, store them in a safe place for future reference.
Contents of package...........................
Preparations   .......................................2
Using the CD manual   .........................2
Arrangement...

2

Using the CD manual
The other manuals for this product are written into the included CD-ROM titled 
“User’s Manual (detailed)”. Before using the CD-ROM, please read the following 
to ensure the proper use.
 System requirements
The system for using the CD-ROM requires the following. 
  Windows®:   OS:Microsoft® Windows® 98, 98SE, NT4.0, Me, 2000/XP, or later
 
CPU:Pentium® processor 133MHz / Memory:32MB or more
  Macintosh®:
 
OS:Mac OS 10.2 or later
 
CPU:Power PC® / Memory:32MB or more
  CD-ROM...

3
ENGLISH

 C 
 B
A      16:10
B
CA     4:3

Arrangement
Refer to the illustrations and tables below to determine screen size and projection distance.
The values shown in the table are calculated for a full size screen: 1280x800 (a) Screen size (diagonal)(b) Projection distance (±10%)(c) Screen height (±10%)
On a horizontal surface
Suspended from the ceiling
• Keep a space of 30 cm or more 
between the sides of the projector 
and other objects such as walls.
• Consult with your dealer before 
a special...

4

Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector. 
Make sure that all the devices are suitable to be connected with this product, and 
prepare the cables required to connect. Please refer to the following illustrations 
to connect them.
WARNING  ►Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION  ►Turn off all devices and unplug their power cords prior to...

5
ENGLISH

Loading batteries into the remote control
Please set the batteries to the remote control before using it. If the remote control starts 
to malfunction, try to replace the batteries. If you will not use the remote control for long 
period, remove the batteries from the remote control and store them  in a safe place.
. Holding the hook part of the battery 
cover, remove it.
2. Align and insert the two AA batteries 
(HITACHI MAXELL, Part No.LR6 or R6P) 
according to their plus and minus...

6

VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTEMY BUTTONPOSITION1 2
ESCENTERMENU
RESET
COMPUTERMY SOURCE/AUTOMAGNIFYPAGE      UPVOLUMEDOWNoONOFF9×FREEZE

Turning on the power
. Make sure that the POWER indicator turns in 
steady orange and the lens cover is removed.
2. Press the STANDBY/ON button on the 
projector or the remote control.
The projection lamp will light up and the POWER 
indicator will begin blinking in green. When the 
power is completely on, the indicator will stop 
blinking and...

7
ENGLISH

VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTEMY BUTTON
POSITION
1 2
ESCENTER
MENU
RESET
COMPUTERMY SOURCE/AUTOMAGNIFYPAGE      UPVOLUME
DOWNoONOFF9×FREEZE

VIDEODOC.CAMERA
KEYSTONE
ASPECTSEARCHBLANK
MUTEMY BUTTONPOSITION1 2
ESCENTERMENU
RESET
COMPUTERMY SOURCE/AUTOMAGNIFYPAGE      UPVOLUMEDOWNoONOFF9×FREEZE

Displaying the picture
. Make sure that the signal source is sending 
the signal to the projector.
2. Use the VOLUME +/- buttons to adjust the 
volume. To have the projector...

8

Lamp
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact your dealer and tell the lamp type number.
Type number : 456-8783
Replacing the lamp
. Turn the projector off, and unplug the power cord. 
Allow the...

9
ENGLISH

Lamp warning
 HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
WARNING  ►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and 
for gas containing mercury to escape from...

0

Please check and clean the air filter periodically. When the indicators or a 
message prompts you to clean the air filter, comply with it as soon as possible. 
Replace the air filter when it is damaged or too soiled. To prepare a new air filter, 
contact with your dealer and tell the air filter type number.
Type number : MU03602
When you replace the projection lamp, please replace the air filter . An air filter of 
specified type will come together with a replacement lamp for this projector ....