Dukane Imagepro 8769 Portable Lcd Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8769 Portable Lcd Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
53 Replacing the Lamp After your lamp has been operating for 2000 hours (up to 3000 hours in Eco mode) or longer, the LAMP indicator in the cabinet will blink red and the message will appear. Even though the lamp may still be working, replace it at 2000 (up to 3000 hours in Eco mode) hours to maintain optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter. See page 50 . CAUTION • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot....
Page 62
![Page 62
54
3.Loosen the tw o screws securing the lamp housing until the phillips scre wdriver goes into a freewheeling
condition. The tw o screws are not remo vab le.
Remo ve the lamp housing b y holding it.
6. Maintenance
NOTE: There is an interlock on this case to prevent the risk of electrical shock. \
Do not attempt to cir cumvent this interlock.
4. Inser t a ne w lamp housing until the lamp housing is plug ged into the socket.
CAUTION
Do not use a lamp other than the Dukane replacement lamp 465-8767A...](http://img.usermanuals.tech/thumb/5762/88572/w300_dukane-imagepro-8769-manual_d-61.png "Page 62
54
3.Loosen the tw o screws securing the lamp housing until the phillips scre wdriver goes into a freewheeling
condition. The tw o screws are not remo vab le.
Remo ve the lamp housing b y holding it.
6. Maintenance
NOTE: There is an interlock on this case to prevent the risk of electrical shock. \
Do not attempt to cir cumvent this interlock.
4. Inser t a ne w lamp housing until the lamp housing is plug ged into the socket.
CAUTION
Do not use a lamp other than the Dukane replacement lamp 465-8767A...")
54 3.Loosen the tw o screws securing the lamp housing until the phillips scre wdriver goes into a freewheeling condition. The tw o screws are not remo vab le. Remo ve the lamp housing b y holding it. 6. Maintenance NOTE: There is an interlock on this case to prevent the risk of electrical shock. \ Do not attempt to cir cumvent this interlock. 4. Inser t a ne w lamp housing until the lamp housing is plug ged into the socket. CAUTION Do not use a lamp other than the Dukane replacement lamp 465-8767A...
Page 63
![Page 63
55
6. Maintenance
6.Finall y, select the men u → [Default] → [Clear Lamp Hour Meter] to reset the lamp usa ge hour s.
NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) \
of ser vice, the projector cannot turn on and the menu
is not displayed. If this happens, do the following while in standby con\
dition to clear values for the Remaining Lamp T ime and the
Lamp Hour Meter: For 8767A/
8 76 9 8070 press the HELP button on the remote control for a minimum of 10 seconds\
.
For 8771...](http://img.usermanuals.tech/thumb/5762/88572/w300_dukane-imagepro-8769-manual_d-62.png "Page 63
55
6. Maintenance
6.Finall y, select the men u → [Default] → [Clear Lamp Hour Meter] to reset the lamp usa ge hour s.
NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) \
of ser vice, the projector cannot turn on and the menu
is not displayed. If this happens, do the following while in standby con\
dition to clear values for the Remaining Lamp T ime and the
Lamp Hour Meter: For 8767A/
8 76 9 8070 press the HELP button on the remote control for a minimum of 10 seconds\
.
For 8771...")
55 6. Maintenance 6.Finall y, select the men u → [Default] → [Clear Lamp Hour Meter] to reset the lamp usa ge hour s. NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) \ of ser vice, the projector cannot turn on and the menu is not displayed. If this happens, do the following while in standby con\ dition to clear values for the Remaining Lamp T ime and the Lamp Hour Meter: For 8767A/ 8 76 9 8070 press the HELP button on the remote control for a minimum of 10 seconds\ . For 8771...
Page 64
56 7. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green Orange Green Orange 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off 0.5 sec On, 0.5 sec Off The main power is off The projector is getting ready to turn on. Off Timer is enabled. The projector is cooling down. The projector is turned on. The projector is in...
Page 65
![Page 65
57
7. Appendix
Common Problems & Solutions (See also Power/Status/Lamp Indicator on page 56 .)
Does not turn on
Will turn off
No picture
Picture suddenly
becomes dark
Color tone or hue is
unusual
Image isn’t square to
the screen
Picture is blurred
Image is scrolling
vertically, horizontally
or both
Remote control does
not work
Indicator is lit or
blinking
Cross color in RGB
mode •
Check that the power cable is plugged in and that the power button on th\
e projector cabinet or the remote
control is on....](http://img.usermanuals.tech/thumb/5762/88572/w300_dukane-imagepro-8769-manual_d-64.png "Page 65
57
7. Appendix
Common Problems & Solutions (See also Power/Status/Lamp Indicator on page 56 .)
Does not turn on
Will turn off
No picture
Picture suddenly
becomes dark
Color tone or hue is
unusual
Image isn’t square to
the screen
Picture is blurred
Image is scrolling
vertically, horizontally
or both
Remote control does
not work
Indicator is lit or
blinking
Cross color in RGB
mode •
Check that the power cable is plugged in and that the power button on th\
e projector cabinet or the remote
control is on....")
57 7. Appendix Common Problems & Solutions (See also Power/Status/Lamp Indicator on page 56 .) Does not turn on Will turn off No picture Picture suddenly becomes dark Color tone or hue is unusual Image isn’t square to the screen Picture is blurred Image is scrolling vertically, horizontally or both Remote control does not work Indicator is lit or blinking Cross color in RGB mode • Check that the power cable is plugged in and that the power button on th\ e projector cabinet or the remote control is on....
Page 66
![Page 66
58
7. Appendix
If there is no picture, or the picture is not displayed correctly.
• Power on process for the projector and the PC.
Be sure to connect the RGB cable between the projector and the computer before turning on the computer.
There are some notebook PCs, which do not output signal unless there is a projector or monitor conn\
ected first.
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads
“0kHz”, this means there is no...](http://img.usermanuals.tech/thumb/5762/88572/w300_dukane-imagepro-8769-manual_d-65.png "Page 66
58
7. Appendix
If there is no picture, or the picture is not displayed correctly.
• Power on process for the projector and the PC.
Be sure to connect the RGB cable between the projector and the computer before turning on the computer.
There are some notebook PCs, which do not output signal unless there is a projector or monitor conn\
ected first.
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads
“0kHz”, this means there is no...")
58 7. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the RGB cable between the projector and the computer before turning on the computer. There are some notebook PCs, which do not output signal unless there is a projector or monitor conn\ ected first. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this means there is no...
Page 67
59 7. Appendix Specifications This section pr ovides technical in fo rmation about the 8767A/8769/8070/8771 Projectors performance. Model Number 8767A/8769/8070/8771 Optical LCD Panel 0.7 p-Si TFT acti ve-mat rix (with Micro Lens Ar ra y on 8767A and 8769 only) Resolution 8767A/8769/8771: 1024 768 pi xels* native, up to UXGA . 8070 : 800 600 pi xels* nati ve , up to UXGA with Ad vanced AccuBlend Lens 8767A/8769/8070/8771: Manual zoom and manual focus F1.7 - 2.0 f=21.6 - 25.9 mm...
Page 68
60 7. Appendix Po wer Requirement 100 - 240V AC, 50 / 60 Hz Input Current 8767A/8769/8070: 2.7 - 1.4A (100 - 240V AC) 8771 : 2.1 - 1.2A (100 - 240V AC) P ower Consumption 8767A/8769/8070: 8W in Standby mode / 250W in Lamp Normal mode / 200W in Lamp Eco mode 8771 : 8W in Stand by mode / 190W in Lamp Normal mode / 155W in Lamp Eco mode Mechanical Installation Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear Dimensions 11.6 (W) 3.7 (H) 10.2 (D) 294mm (W) 93mm (H) 260mm (D) (not...
Page 69
61 7. Appendix Cabinet Dimensions LAMP STATUS POWER VIDEO AUTO ADJ. S-VIDEO COMPUTER-1 COMPUTER-2 ON/STAND BY ZOOM FOCUS SELECT AC IN AUDIO OUT AUDIO S-VIDEO IN COMPUTER 2 IN VIDEO IN COMPUTER 1 IN MONITOR OUT PC CONTROLL/MONOR AUDIOL/MONOR AUDIO 112.5 (4.4) 260 (10.2) 20.3 (0.8) 64.6 (2.5) 294 (11.6) 71.5 (2.8) Lens center Lens center Unit: mm (inch)
Page 70
62 7. Appendix