Dukane Imagepro 8759 Users Guide

31
Picture menuTo adjust the following six settings, highlight the setting, press Select, use 
the up and down arrows to adjust the values, then press select to confirm 
the changes.
Key s t o n e: adjusts the image vertically and makes a squarer image. You can 
also adjust keystone from the keypad. If you want the projector to automat-
ically adjust the keystone, check the Auto Keystone check box. If you then 
manually adjust the keystone, Auto Keystone is turned off. When the pro-
jector is in Ceiling...

32
Presets: The provided Presets optimize the projector for displaying com-
puter presentations, photographs, and film images. You can use the preset 
as a starting point, then further customize the settings for each source. To 
restore the factory default settings, choose Factory Reset in the Set-
tings>Service menu.
There are also three user-definable presets. To set a preset for the current 
source, adjust the image, then choose Save User 1, 2, or 3. You can recall 
these settings in the future by...

33 Advanced settings
Sharpness: (video sources only) changes the clarity of the edges of a video 
image. Select a sharpness setting.
Color Space: This option applies to computer sources. It allows you to 
select a color space that has been specifically tuned for the video input. 
When Auto is selected, the projector automatically determines the standard. 
To choose a different setting, turn off Auto, then choose RGB for computer 
sources, choose either REC709 or REC601 for component sources.
Color...

34
Settings menuAudio: allows adjustments to the volume and balance, and turns the projec-
tor ’s startup Chime on and off.
Sources
: allows you to assign a particular input to a specific source key 
when using the optional Integrator remote. Also allows selection of a 
default Power-up Source and enables or disables Autosource. 
Sources>Power-up Source: this determines which source the projector 
checks first for active video during power-up. 
Sources>Autosource: When Autosource is not checked, the...

35
Screen Saver Off: prevents your computer from going into Screen Save 
mode.
Pow e r  S av e: automatically turns the lamp off after no signals are detected 
for 20 minutes. After 10 additional minutes with no signal, the projector 
powers down. If an active signal is received before the projector powers 
down, the image will be displayed. 
Screen Save: automatically blanks the screen with a black color after no sig-
nals are detected for a preset number of minutes. The image returns when 
an active...

36 LitePort
This menu allows you to control the embedded LitePort player in your pro-
jector to display JPEGs stored on your USB mass storage device. You can 
also control the LitePort player with the remote or keypad. See page 27.
Auto Play: When this box is checked (the default), the projector automati-
cally makes the LitePort player the active source and displays, in Full Screen 
mode, the first JPEG in the LitePort\AutoPlay folder on the USB drive. If no 
AutoPlay folder exists or the AutoPlay...

37
Startup Logo: allows you to display a blank Black, White, or Blue screen 
instead of the default screen at startup and when no source is detected.
Blank Screen: determines what color is displayed when you press the 
Blank button on the remote.
Startup LogoBlank Screen 

38
Effect Key: allows you to assign a different function to the Effect button on 
the remote to quickly and easily use the effect. Only one effect can be 
enabled at a time. Highlight an effect and press Select to choose a different 
one. The default effect is About.
Blank: shows an empty screen. 
Mute: turns off all sound. 
Aspect Ratio: sets the ratio of the image width to image height.
Source: cycles through the available sources.
Auto Image: causes computer sources to be reacquired.
Freeze: pauses...

39
MaintenanceCleaning the lens1
Apply a non-abrasive camera lens cleaner to a soft, dry cloth.
Avoid using an excessive amount of cleaner, and don’t apply the 
cleaner directly to the lens. Abrasive cleaners, solvents or other harsh 
chemicals might scratch the lens.
2
Lightly wipe the cleaning cloth over the lens in a circular motion. If you 
don’t intend to use the projector immediately, replace the lens cap.
Using the security lockThe projector has a security lock for use with a cable lock system....

40
Replacing the projection lampThe lamp hour timer in the About menu counts the number of hours the 
lamp has been in use. Fifty hours before the specified end of the lamp’s life, 
the message “Replace lamp” briefly appears on the screen at each startup 
and in the Interactive Display. After 50 additional hours, the lamp will no 
longer light. You can order new lamp modules from your dealer. See 
“Accessories” on page 43 for information.1
Turn off the projector and unplug the power cable. 
2
Wait 60...