Dukane Imagepro 8755h Projector Users Manual

							3
INPUT menu
INPUT menu (continued)
ItemDescription
VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2) 

  Using the ▲/▼ buttons switches the mode 
for video format.
AUTO   ó  NTSC  
ó  PAL  
ó  SECAM 
      N-PAL  ó M-PAL 
ó NTSC4.43 
• This item is performed only for a video signal 
from VIDEO port or S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• 
The AUTO operation may not work well for some signals. If the picture becomes unstable 
(e.g. an irregular picture, lack of color), please select the mode according to the input sig nal.
FRAME LOCKSet the frame lock function on/off for each port.
(1) 

  Using the ▲/▼ buttons to select one of 
following ports.
COMPUTER(IN)1  ó COMPUTER(IN)2
(2) 

 
Using the ◄/► buttons to turns the 
frame lock function on/off. 
TURN ON  ó TURN OFF
• This item can be performed only on a signal with a vertical 
frequency of 50 to 60 Hz.
•
 When the TURN ON is selected, a moving pictures are displayed more smoothly.• This function may cause a certain degradation of the picture. In 
such a case, please select TURN OFF.
COMPUTER IN
The computer input signal type for COMPUTER IN1 and IN2 ports can be s et.
(1)  Use the ◄/► buttons to select the input 
port to be set.
COMPUTER (IN)1  ó COMPUTER (IN)2
(2) 

  Use the ▲/▼ buttons to select the 
computer input signal type.
SYNC ON G ON  ó SYNC ON G OFF
Selecting SYNC ON G ON allows reception of sync on G signal.
• When SYNC ON G ON is selected, the picture may be distorted with 
certain input signals. In such a case, remove the signal connector first 
and select SYNC ON G OFF on the menu, and then reconnect the sign al.
(continued on next page) 
						

							3
INPUT menu
INPUT menu (continued)
ItemDescription
RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can 
be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ 
buttons and press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select 
the resolution you wish to display using 
the ▲/▼ buttons. 
Selecting AUTO will set a resolution 
appropriate to the input signal.
(3) STANDARD
Pressing the ► or ENTER button when 
selecting a STANDARD resolution will 
automatically adjust the horizontal and 
vertical positions, clock phase and 
horizontal size and automatically select 
an aspect ratio. 
(3) CUSTOM (3)-1 To set a custom resolution use the  ▲/▼ buttons to select the CUSTOM 
and the CUSTOM RESOLUTION 
box will be displayed. Set the 
horizontal (HORZ) and vertical 
(VERT) resolutions using the ▲/▼
/◄/► buttons. It is not guaranteed 
to work this function properly on any 
resolutions.
(3)-2 To save the setting place the  cursor on the right-most digit and 
press the ► button.
     The horizontal and vertical positions,  clock phase and horizontal size will 
be automatically adjusted.
(3)-3 To revert back to the previous  resolution without saving changes 
place the cursor on the left-most 
digit and press the ◄ button.
    The screen will then return to the  RESOLUTION menu displaying the 
previous resolution.
• For some pictures, this function may not work well. STANDARD  
↓
CUSTOM  ↓ 
						

							33
SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
AUTO 
KEYSTONE 
EXECUTE Selecting this item performs the automatic keystone distortion 
correction. Projector automatically corrects vertical keystone 
distortion due to the (forward/backward) setup angle by itself.
This function will be executed only once when selected in the menu. 
When the slant of the projector is changed, execute this function 
again.
• The adjustable range for correction will vary among inputs. For 
some input, this function may not work well.
• When V:INVERT or H&V:INVERT is selected to the MIRROR item 
in the SETUP menu, if the projector screen is inclined or angled 
downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE (telephoto focus), 
this function may be excessive. This function should be used when 
the zoom adjustment is set to the full WIDE (wide-angle focus) 
whenever possible.
• When the projector is placed on the level (about ±3°), this function 
may not work.
• When the projector is inclined to near ±30 degree or over, this 
function may not work well.
• This function will be unavailable when the Transition Detector is 
on (

49).
KEYSTONE 
Using the ▲/▼ buttons corrects the vertical keystone distortion. Shrink the top of the image  ó Shrink the bottom of the image
• The adjustable range of this function will vary with the type of input 
signal. For some input, this function may not work well.
• This function will be unavailable when the Transition Detector is 
on (
 49).
(continued on next page) 
						

							34
SETUP menu
SETUP menu (continued)
ItemDescription
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL  ó WHISPER
• 
When WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL   ó  H:INVERT  
ó  V:INVERT  
ó  H&V:INVERT
    
If the Transition Detector is TURN ON and MIRROR status is changed, 
Transition Detector Alarm ( 49) will be displayed when projector is 
restarted after the power switch is turned off.
STANDBY MODE
Using ▲/▼ buttons switches the standby mode setting between 
NORMAL and SAVING. 
NORMAL  ó SAVING
When SAVING is selected, the power consumption in the standby mode 
is lowered with some functional restriction as below:
• 
When SAVING is selected, the RS-232C communication control is disabled 
except to turn the projector on while the projector is in the standby mode.
• When SAVING is selected, any setting of the MONITOR OUT (
below) and AUDIO ( 35) in the standby mode is invalid, and no signal 
is output from both of MONITOR OUT and AUDIO OUT ports in the 
standby mode.
MONITOR OUT
The combination of a picture shown on screen and output from the 
MONITOR OUT port can be arranged in the menu.
The picture coming into the port selected in the (2) is output to the 
MONITOR OUT port while an image from the port chosen in the (1) is 
on screen.
(1) Choose a picture input port using ▲/▼ buttons.
• Choose STANDBY, to select the output signal from the MONITOR 
OUT port in the standby mode.
• 
While QUIT is selected, pressing the ◄ button returns to the previous menu.(2) Select one of the COMPUTER IN ports using ◄/► buttons. Choosing the COMPUTER 1 allows the following choice.
1 (COMPUTER IN1)  ó OFF
Choosing the COMPUTER 2 allows the following choice. 2 (COMPUTER IN2)  ó OFF
Choosing other input or STANDBY allows the following choice. 1 (COMPUTER IN1)  ó 2 (COMPUTER IN2)  
ó OFF
   
• OFF disables the MONITOR OUT port.
QUIT  ó 
COMPUTER 1   
ó 
COMPUTER 2
     (COMPUTER IN1) (COMPUTER IN2)STANDBY
   

VIDEO  ó S-VIDEO 
ó COMPONENT
                     
(Y, Cb/Pb, Cr/Pr)  
						

							35
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table below 
can be performed. Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor button or the ENTER 
button to execute the item. Then perform it according to 
the following table.
ItemDescription
VOLUME Using the ▲/▼ buttons adjusts the volume.
High  ó Low
SPEAKER Using the ▲/▼ buttons turns on/off the built-in speaker.
TURN ON  ó TURN OFF
When TURN OFF is selected, the built-in speaker does not work.
AUDIO The combination of a picture and audio 
input port can be arranged in the menu.
The audio coming into the port selected in 
the (2) is output while an image from the 
port chosen in the (1) is on screen.
(1) 

  Choose a picture input port using the 
▲/▼ buttons.
• Choose AUDIO OUT STANDBY, to select the audio output to the 
AUDIO OUT port in the standby mode. The built-in speaker does 
not work in the standby mode.
• While QUIT is selected, pressing the ◄ button returns to the 
previous menu.
(2) 
   Select one of the AUDIO IN ports using ◄/► buttons.
1 (AUDIO IN1)  ó 2 (AUDIO IN2) 
ó 3 (AUDIO IN3) 
ó 
•  disables the audio output.
• When  is selected to VIDEO, S-VIDEO or COMPONENT port, 
the C.C. (Closed Caption) is automatically activated, if the C.C. is 
set to AUTO in the DISPLAY menu of the C.C. menu and the signal 
from the input port supports the C.C. feature (
 53). 
QUIT 
ó 
COMPUTER 1   
ó 
COMPUTER 2
     (COMPUTER IN1) (COMPUTER IN2)AUDIO OUT STANDBY
   

VIDEO  ó S-VIDEO 
ó COMPONENT
                     
(Y, Cb/Pb, Cr/Pr)  
						

							36
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language .
�
TÜRKÇE �
POLSKI �
SUOMI �
ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO
�
NORSK �
NEDERLANDS �
PORTUGUÊS �
РУССКИЙ  � SVENSKA  � ¿—µ � 4P¨
[ � 1T
[ � ãÄ.† 
MENU POSITION Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press MENU button on the remote control or 
keep no operation for about 10 seconds.
BLANK Using the ▲/▼ buttons switches the mode for the BLANK screen.
The BLANK screen is a screen for the temporarily blanking feature
  
(
20). It is displayed by pressing BLANK button.
MyScreen  ó ORIGINAL 
ó BLUE 
ó WHITE 
ó BLACK
       
Feature
MyScreen Screen can be registered by the MyScreen item 
(
37).
ORIGINAL Screen preset as the standard screen.
BLUE, WHITE, 
BLACK Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the plain black screen after several minutes.
(continued on next page) 
						

							37
ItemDescription
START UP Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen  ó ORIGINAL 
ó TURN OFF
          
Feature
MyScreen Screen can be registered by the MyScreen item 
(
below).
ORIGINAL Screen preset as the standard screen.
TURN OFF Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 
screen will change to the BLANK screen (
36) after several 
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, 
the plain black screen is instead used.
• When the TURN ON is selected to the MyScreen PASSWORD of 
SECURITY item in OPTION menu (
 46), the START UP is fixed to 
MyScreen.
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1. 

  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER button when the image is displayed. The image will 
freeze and the frame for capturing will appear. 
To stop performing, press the RESET or ESC button.
2. 
   Using the ▲/▼/◄/► buttons adjusts 
the frame position. 
Please move the frame to the position 
of the image which you want to use. 
The frame may not be able to be 
moved for some input signals. 
To start registration, press the ENTER 
button. 
To restore the screen and return to 
the previous dialog, press the RESET 
or ESC button. 
Registration takes several minutes.
(continued)
SCREEN menu
SCREEN menu (continued)
(continued on next page) 
						

							38
SCREEN menu
SCREEN menu (continued)
ItemDescription
MyScreen
(continued) When the registration is completed, the registered screen and 
the following message are displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed: “A capturing error has occurred. Please try again.” 
• This function cannot be selected when the TURN ON is selected 
to the MyScreen Lock item (
 below).
• This function cannot be selected when TURN ON is selected to 
the MyScreen PASSWORD of SECURITY item in OPTION menu 
(
 46).
MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function.
TURN ON  ó TURN OFF
When the TURN ON is selected, the MyScreen item is locked. Use 
this function for protecting the current MyScreen.
• This function cannot be selected when TURN ON is selected to 
the MyScreen PASSWORD of SECURITY item in OPTION menu 
(
 46).
MESSAGE Using the ▲/▼ buttons turns on/off the message function.
TURN ON  ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Searching…” while searching for the input
“Detecting…” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while the projector is in the FREEZE mode.• If the projector goes into the FREEZE mode while the TURN OFF 
is selected, the picture on screen is frozen without any messages, 
which is not a malfunction (
 20). 
(continued on next page) 
						

							39
SCREEN menu
SCREEN menu (continued)
ItemDescription
SOURCE NAME Each input port for this projector can have a name applied to it.
(1) 
Use the ▲/▼ buttons on the SCREEN menu to 
select SOURCE NAME and press the 
► button. 
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE 
NAME menu to select the port to be named 
and press the ► button. Right side of the 
menu is blank until a name is specified.
The SOURCE NAME dialog will be displayed.
(3) The current name will be displayed on the 
first line. Use the 
▲/▼/◄/► buttons and the 
ENTER or INPUT button to select and enter 
characters. The RESET button can be used 
to erase 1 character at a time. Also if you 
move the cursor to DELETE or ALL CLEAR on 
screen and push the ENTER or INPUT button, 
1 character or all characters will be erased. The 
name can be a maximum of 16 characters.
(4) To change an already inserted character, 
press the 
▲ button to move the cursor to the 
first line, and use the 
◄/► buttons to move 
the cursor on the character to be changed.
After pressing the ENTER or INPUT button, the character is selected. 
Then, follow the same procedure as described at the item (3) abov e.
(5) To finish entering text, move the cursor to the SAVE on screen 
and press the ENTER or INPUT button. To revert to the previous 
name without saving changes, move the cursor to the CANCEL on 
screen and press the ENTER or INPUT button.
TEMPLATE
Using ▲/▼ buttons switches the mode for the template screen. The 
selected template pattern can be displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed
 ( 42).
DOT-LINE4 
ó  DOT-LINE3 
ó  DOT-LINE2 
             
                

          TEST PATTERN ó  DOT-LINE1  
						

							40
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item, 
except for the items LAMP TIME and FILTER TIME. Then 
perform it according to the following table.
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON  ó TURN OFF
When the TURN ON is selected, detecting no signal automatically 
cycles through input ports in the following order. The search is 
started from the current port. Then when an input is found, the 
projector will stop searching and display the image. 
           COMPUTER IN1  ð COMPUTER IN2
   VIDEO
    S-VIDEO 
  COMPONENT
AUTO 
KEYSTONE 
Using the ▲/▼ buttons turns on/off the automatic keystone function.
TURN ON  ó TURN OFF
TURN ON : Automatic keystone distortion correction will be 
executed whenever changing the slant of the projector.
TURN OFF : This function is disabled. Please execute the AUTO 
KEYSTONE 
 EXECUTE in the SETUP Menu for automatic 
keystone distortion correction.
• When the projector is suspended from the ceiling this feature will 
not function properly so select the TURN OFF.
• This function will be unavailable when the Transition Detector is 
on (
 49).
AUTO ON Using the ▲/▼ buttons turns on/off the AUTO ON function.
TURN ON  ó TURN OFF
When set to the TURN ON, the lamp in projector will be 
automatically turned on without the usual procedure (
 14), only 
when the projector is supplied with the power after the power was 
cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the AUTO ON function, if neither input 
nor operation is detected for about 30 minutes, the projector is 
turned off, even though the AUTO OFF function (
 41) is disabled.
(continued on next page)