Dukane Imagepro 8755e Portable Lcd Projector Users Manual

							
9

PICTURE Menu
ItemDescription
MY MEMORY
Selecting a mode of MY MEMORY using the buttons ▲/▼ and then pressing the button ► or the ENTER button performs each function.
LOAD ó LOAD ó LOAD3 ó LOAD4
SAVE4 óSAVE3 ó SAVE ó SAVE 
This projector has 4 numbered memories for adjustment data.  Performing the LOAD, LOAD, LOAD3 or LOAD4 loads the data on the memory whose number corresponds to the command’s number, and adjusts the picture automatically depending on the data. Performing the SAVE, SAVE, SAVE3 or SAVE4 saves the current adjustment data on the memory whose number corresponds to the command’s number. • The current adjustment data of the items in the PICTURE menu is stored.• There may be some noise and/or the screen may flicker for a 
moment when data is loaded to memory. This is not a malfunction.
When  the  current  settings  are  not  saved  to  memory  the  following dialog is displayed.
To load saved adjustment settings press the MEMORY button.When there are no saved adjustment settings the following dialog is displayed.
PICTURE Menu (continued)
6GORQTCT[EQPFKVKQP//14;4GECNNUCXGFRCTCOGVGTU3WKV
0QUCXGFFCVC 
						

							
30

IMAGE Menu
IMAGE Menu
ItemDescription
ASPECT
Using the buttons ▲/▼ switches the mode for aspect ratio. For an RGB signalNORMAL ó 4:3 ó 6:9 ó SMALL         
For a video signal, s-video signal or component video signal4:3 ó 6:9 ó 4:9 ó SMALL     
For a no signal4:3 (fixed)• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the buttons ▲/▼ adjusts the over-scan ratio.Large (It reduces picture) ó Small (It magnifies picture)• This item can be selected only for a video, s-video and component signal.• When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.
V POSITION
Using the buttons ▲/▼ adjusts the vertical position.Up ó Down• Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs please reset the vertical position to the \
default setting. Pressing the RESET button when V POSITION is selected will reset the V POSITION to the default setting.For a video signal, s-video signal or component video signalThe adjustable range of V.POSITION depends on the OVERSCAN setting.It is not possible to adjust when the OVERSCAN is set to 0.
H POSITION
Using the buttons ▲/▼ adjusts the horizontal position.Left ó Right• Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs please reset the horizontal position to the default setting. Pressing the RESET button when H POSITION is selected will reset the H POSITION to the default setting.For a video signal, s-video signal or component video signalThe adjustable range of H.POSITION depends on the OVERSCAN setting.It is not possible to adjust when the OVERSCAN is set to 0.
H PHASE
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker.
Right ó Left
• This item can be selected only for an RGB signal or a component video signal. 
With the IMAGE menu, items shown in the table below can 
be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
/07=4)$?
+/#)
2+%674
5.%6
#761#&,756:%76
#52%61845%#0
*2*#5*5+
						

							
3

IMAGE Menu
ItemDescription
H SIZE
Using the buttons ▲/▼ adjusts the horizontal size.
Large ó Small
• This item can be selected only for an RGB signal.
• When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation.
AUTO ADJUST EXECUTE
Selecting this item performs the automatic adjustment feature.
For an RGB signalThe vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically set to default. And the aspect ratio will be automatically selected. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signalThe video format best suited for the respective input signal will be selected automatically.This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu. For a component video signal, the signal type is identified automatically independently of this function.For a video signal, s-video signal or component video signalThe vertical position, horizontal position and aspect ratio will be automatically set to default.
For a component video signalThe horizontal phase will be automatically set to default.
• The automatic adjustment operation requires about 0 seconds. Also please note that it may not function correctly with some input.
IMAGE Menu (continued) 
						

							
3

INPUT Menu
INPUT Menu
ItemDescription
PROGRESSIVE
Using the buttons ▲/▼ switches the progress mode.
TV ó FILM ó TURN OFF
• This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or COMPONENT VIDEO input of 55i (480i) or 65i (576i) signal.
• When TV or FILM is selected, the screen image will be sharp. FILM adapts to the -3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select TURN OFF, even though the screen image may lose the sharpness.
VIDEO NR
Using the buttons ▲/▼ switches the noise reduction mode.
HIGH ó MID ó LOW• This function performs only at a VIDEO input, an S-VIDEO or COMPONENT VIDEO input of 55i(480i) or 65i(576i) signal. 
• When this function is excessive, it may cause a certain degradation of the picture. 
COLOR SPACE
Using the buttons ▲/▼ switches the mode for color space. 
AUTO ó RGB ó SMPTE40 ó REC709 ó REC60      
• This item can be selected only for an RGB signal or a component video signal (except signals of SCART RGB from the component video port).
• The AUTO mode automatically selects the optimum mode. 
• The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.
With  the  INPUT  menu,  the  items  shown  in  the  table  below 
can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
/07=4)$?
+/#)5672
2+%674+0276
126+10#5;/07
5%40
5.%6
8+&1(14/#6#761
%1.1452#%#761
(4#/.1%-4)$+0
451.76+10
%1/21006%1/21006
674010
241)455+8688+&104/+& 
						

							
33

ItemDescription
COMPONENT
Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. 
COMPONENT ó SCART RGB 
When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input and VIDEO port function as a port for SCART RGB sync input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer.
VIDEO FORMAT
Set the video format for the s-video port and video port.
() Use the ◄/► buttons to select the input port.
(2) Using the buttons ▲/▼ switches the mode for video format.
AUTO  ó  NTSC  ó  PAL  ó  SECAM 
      N-PAL ó M-PAL ó NTSC4.43 
• This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. 
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal.
FRAME LOCK
Using the buttons ▲/▼ turns the frame lock function on/off. 
TURN ON ó TURN OFF
• This item performs only at a RGB signal with vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, a moving picture is displayed more smoothly.
• This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.
RGB IN
Set the RGB input signal type for the RGB port.
() Use the ◄/► buttons to select the RGB port to be set.
RGB ó RGB
(2) Use the ▲/▼ buttons to select the RGB input signal type.
SYNC ON G ON ó SYNC ON G OFF
• Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC ON G.• In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect 
the signal.
INPUT Menu
INPUT Menu (continued)
4)$+04)$
5;0%10)1((5;0%10)104)$
8+&1(14/#658+&1#761065%2#.5%#/065%/2#.02#.
8+&1 
						

							
34

INPUT Menu
ItemDescription
RESOLUTION*2
The resolution for the RGB and RGB input signals can be set on this projector.
(1) In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
()  In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) Pressing the ► or Enter button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size and automatically select an aspect ratio. The INFORMATION dialog (43)  will be displayed.
(4) To set a custom resolution use the ▲/▼ buttons to select CUSTOM and the CUSTOM RESOLUTION BOX will be displayed. Set the horizontal (HORZ) and vertical (VERT) resolutions using the ▲/▼/◄/►buttons. *
(5) To save the setting place the cursor on the right-most digit and press the ► button.The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted and an aspect ratio will be automatically selected. After the INFORMATION(43) dialog has displayed for about 0 seconds the screen will return to the RESOLUTION menu displaying the changed resolution.
(6) To revert back to the previous resolution without saving changes place the cursor on the left-most digit and press the ◄ button.The screen will then return to the RESOLUTION menu displaying the previous resolution.
INPUT Menu (continued)
451.76+10
56#0&
%7561/
#761ZZZ
Z
RESOLUTION MENU
INFORMATIONRGB80x 768@ 60
INFORMATIONRGB99x 744@ 60
451.76+10
56#0&
%7561/
#761ZZZ
Z
%7561/451.76+10
56

*14
						

							
35

SETUP Menu
SETUP Menu
ItemDescription
AUTO KEYSTONE EXECUTE
Selecting this item performs the Automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.
• This function will be executed only once when selected in the Menu. When the slant of the projector is changed, executes this function again.
• When V:INVERT or H&V:INVERT is selected to the MIRROR item in the SETUP menu, if the projector screen is inclined or angled downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE (telephoto focus), this correction may be excessive. This function should be used when the zoom adjustment is set to the WIDE (wide-angle focus) whenever possible.• When vertical degree is almost 0 degree, the automatic keystone distortion correction may not work.
• When vertical degree is over ±30 degree, the automatic keystone distortion correction may not work well.• This function will be unavailable when Transition Detector is on (48).
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data ó Lower in the data
• The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
• This function will be unavailable when Transition Detector is on (48).
WHISPER
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL ó WHISPER
• When the WHISPER is selected, acoustic noise and screen brightness are reduced.
With the SETUP menu, the items shown in the table below 
can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
/07=4)$?
+/#)5672
2+%674+0276
126+10#5;/07
5%40
5.%6
9*+524014/#./+4414014/#.
-;5610
#761-;5610:%76
#7&+181.7/ 
						

							
36

SETUP Menu
SETUP Menu (continued)
ItemDescription
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT 
If Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (48) will be displayed when projector is restarted after the power switch is turned off.
VOLUMEUsing the buttons ▲/▼ adjusts the volume.
High ó Low
AUDIO
Allocates the audio ports.
Choose a picture input port using the buttons ▲/▼ (1), then select the audio port to be interlocked with the input port using the buttons ◄/► (2). When off is selected, all audio ports do not work for the input port.
()  RGB ó RGB ó COMPONENT ó S-VIDEO ó VIDEO
()   ó  ó 3 ó 
#7&+14)$
37+64)$
58+&18+&1
%1/21006
 
						

							
37

SCREEN Menu
SCREEN Menu
ItemDescription
LANGUAGE
Using the buttons ▲/▼ switches the OSD (On Screen Display) language.
SUOMI ó POLSKI ó TÜRKÇE
ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
    ó    ó        ó SVENSKA ó
MENU POSITIONUsing the buttons ◄/►/▲/▼ adjusts the menu position.To quit the operation, press the MENU button on the remote control or keep no operation for about 0 seconds.
BLANK
Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature 
(22). It is displayed by pressing the BLANK button on the remote control.
MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK
  
MyScreen is a screen you can register as a desired screen. The ORIGINAL screen is the existing standard screen. BLUE, WHITE and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes.
• For the MyScreen, please refer to the MyScreen item (38).
With  the  SCREEN  menu,  the  items  shown  in  the  table 
below can be performed. 
Select an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to execute the item. Then perform it 
referring to the following table. 
/07=4)$?
+/#)5672
2+%674+0276
126+10#5;/07
5%40
5.%6.#0)7#)0).+5*/07215+6+1056#467214+)+0#./[5ETGGP/[5ETGGP.QEM67401((
5174%0#//55#)674010
$.#0-$.#%- 
						

							
38

SCREEN Menu
ItemDescription
START UP
Using the buttons ▲/▼ switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.MyScreen ó ORIGINAL ó TURN OFF
    MyScreen is a screen you can register as a desired screen.The ORIGINAL screen is the existing standard screen. When TURN OFF is selected, the BLACK screen is used.• To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLANK screen after several minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen below. For 
the BLANK screen, please refer to the BLANK item (37).• This function will be unavailable and fixed to Myscreen when MyScreen Password in the Security Menu is on. 
MyScreen
This item functions for capturing the MyScreen of the blank screen and the start-up screen. Please execute displaying the input including the picture you want to capture..  Selecting this item displays a dialog titled “MyScreen”. It will a\
sk you if you start capturing the picture from the current screen. Please wait for the target picture to be displayed, and press the ENTER button on the remote control when the picture is displayed. The picture will freeze and the frame for capturing appears.
     
To stop performing, press the RESET or ESC button on the remote control. .  Using the buttons ◄/►/▲/▼ adjusts the frame position. Please move the frame to the position of the picture which you want to use.     
The frame may not be able to be moved for some input signals.     To start registration, press the ENTER button on the remote control.     
To restore the screen and return to the previous dialog, press the RESET or ESC button on the remote control.Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen registration is finished.” are displayed for several seconds. If the registration failed, the message “A capturing error has occurred. Please try again.” is displayed.• This function will be unavailable when MyScreen Password in the Security Menu is on. NOTE : The KEYSTONE cannot be adjusted while using the MyScreen function.
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.TURN ON ó TURN OFFWhen the TURN ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen.• This function will be unavailable when MyScreen Password in the Security Menu is on. 
SCREEN Menu (continued)