Dukane Imagepro 8755d-Rj Portable Lcd Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 8755d-Rj Portable Lcd Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
59 Network Functions Network Functions Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. ( 4) Failure & Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. ( 25) Projector Management via SNMP This projector is SNMP (Simple Network...
Page 62
60 Network Functions Notes:
Page 63
61 Network Functions Before using the network functions… To use the network functions of this projector, the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network. Connect to the Gateway (The router/PC that forwards traffic to a destination outside of the subnet of the transmitting device) from the network terminal on the projector...
Page 64
62 Configuring and controlling the projector via a web browser
Page 65
63 Network Functions When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the differences between user and administrator IDs. Below are the factory default settings for administrator IDs, user IDs and passwords. ItemDescriptionAdministrator IDUser ID Network InformationDisplays the projector’s current network configuration settings.√√ Network SettingsDisplays and...
Page 66
![Page 66
64
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. 1 will be displayed.
2) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or configuration item on the main menu located on...](http://img.usermanuals.tech/thumb/5762/88602/w300_dukane-imagepro-8755d-rj-manual_d-65.png "Page 66
64
Settings
Settings
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
[https://192.168.1.10] into the
address bar of the web browser and
the screen in Fig. 1 will be displayed.
2) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2 or Fig.3 screen will be displayed.
3) Click the desired operation or configuration item on the main menu located on...")
64 Settings Settings Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser and the screen in Fig. 1 will be displayed. 2) Enter your ID and password and click [Logon]. If the logon is successful either the Fig.2 or Fig.3 screen will be displayed. 3) Click the desired operation or configuration item on the main menu located on...
Page 67
65 Settings Network Information All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector’s current network configuration settings. ItemDescription DHCPDisplays the DHCP configuration settings. IP Address Displays the current IP address. Subnet MaskDisplays the Subnet Mask. Default GatewayDisplays the Default Gateway. MAC...
Page 68
![Page 68
66
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses. NOTE...](http://img.usermanuals.tech/thumb/5762/88602/w300_dukane-imagepro-8755d-rj-manual_d-67.png "Page 68
66
Settings
Network Settings
Displays and configures network settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. When the configuration settings are changed, you must
restart the network connection. You can restart the network connection by
clicking [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses. NOTE...")
66 Settings Network Settings Displays and configures network settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. NOTE...
Page 69
![Page 69
67
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)
Configures command control port 1 (Port:23).
Port openClick the...](http://img.usermanuals.tech/thumb/5762/88602/w300_dukane-imagepro-8755d-rj-manual_d-68.png "Page 69
67
Settings
Port Settings
Displays and configures communication port settings.
Click the [Apply] button to save the settings.
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.dresses.
NOTE
ItemDescription
Network Control Port1 (Port:23)
Configures command control port 1 (Port:23).
Port openClick the...")
67 Settings Port Settings Displays and configures communication port settings. Click the [Apply] button to save the settings. • The new configuration settings are activated after restarting the network connection. The network connection must be restarted when the configuration settings are changed. The network connection can be restarted using [Network Restart] on the main menu.dresses. NOTE ItemDescription Network Control Port1 (Port:23) Configures command control port 1 (Port:23). Port openClick the...
Page 70
![Page 70
68
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses. NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function.
Configure the conditions for sending email under [Alert Settings].
SMTP Server IP...](http://img.usermanuals.tech/thumb/5762/88602/w300_dukane-imagepro-8755d-rj-manual_d-69.png "Page 70
68
Settings
Mail Settings
Displays and configures e-mail addressing settings.
Click the [Apply] button to save the settings.
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses. NOTE
ItemDescription
Send MailClick the [Enable] check box to use the e-mail function.
Configure the conditions for sending email under [Alert Settings].
SMTP Server IP...")
68 Settings Mail Settings Displays and configures e-mail addressing settings. Click the [Apply] button to save the settings. • You can confirm whether the mail settings work correctly using the [Send Test Mail] button. • If you connect the projector to an existing network, consult a network administrator before setting server addresses. NOTE ItemDescription Send MailClick the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings]. SMTP Server IP...