Dukane Imagepro 8755c Lcd Projecor Users Manual

LCD Projector
Model 8063/8755C
Users Man ual
Operators Guide 

Contents:
1. Users Man ual– Saf ety Guide , ..
2. Users Man ual– Oper ating Guide , .............Page 1-49
3. Users Man ual– T echnical Guide , ..............Page 1-14 

Projector
User's MëÄnuëÄl ëf SëÄfetyëS Guide
1
About The Symbols
VarioJás symJÈols are Jásed in this manJáal, the Jáser’s manJáal and on the prodJáct itself to
ensJáre  correct  Jásage,  to  prevent  danger  to  the  Jáser  and  others,  and  to  prevent  property
damage.  The  meanings  of  these  symJÈols  are  descriJÈed  JÈelow.  It  is  important  that  yoJá
read these descriptJlions thoroJághly and JlfJálly Jánderstand the Jlcontents.
TypicëÄl Symbols
This  symJÈol  indicates  an  additional...

2
Safety Precautions
WARNING
Never use the projector if a problem should occur.
Abnormal  operations  such  as  smoke,  strange  odor,  no  image,  no  sound,
excessive  sound,  damaged  casing  or  elements  or  cables,  penetration  of
liquids or foreign matter, etc. can cause a fire or electrical shock.
In such case, immediately turn off the power switch and then disconnect the
power plug from the power outlet. After making sure that the smoke or odor
has  stopped,  contact  your  dealer.  Never...

WARNING
Be cautious of High temperatures of the projector.
High  temperatures  are  generated  when  the  lamp  is  lit.  It  could  result  in  fire
or burn. Use special caution in households where children are present. 
Do not touch about the lens, air fans and ventilation openings during use or
immediately after use, to prevent a burn. Take care of ventilation.
•  Keep  a  space  of  30  cm  or  more  between  the  sides  and  other  objects  such
as walls.
• Do not place the projector on a metallic...

WARNING
Be careful in handling the light source lamp.
The  projector  uses  a  high-pressure  mercury  glass  lamp  made  of  glass.  The
lamp  can  break  with  a  loud  bang,  or  burn  out.  When  the  bulb  bursts,  it  is
possible  for  shards  of  glass  to  fly  into  the  lamp  housing,  and  for  gas
containing mercury to escape from the projector’s vent holes. 
Please carefully read the section “Lamp”.
Be careful in handling the power cord and external connection cables.
If you keep using a...

5
Safety Precautions (continued)
CAUTION
Be careful in moving the projector.
Neglect could result in an injury or damage.
•  Do  not  move  the  projector  during  use.  Before  moving,  disconnect  the
power  cord  and  all  external  connections,  and  close  the  slide  lens  door  or
attach the lens cap.
• Avoid any impact or shock to the projector. 
• Do not drag the projector.
• For moving the projector, use the enclosed case or bag if provided.
Do not put anything on top of the projector.
Placing...

6
Safety Precautions (continued)
NOTE
Do not give the remote control any physical impact.
A physical impact could cause damage or malfunction of the remote control.
• Take care not to drop the remote control.
• Do not place the projector or heavy objects on the remote control.
Take care of the lens.
• Close  the  slide  lens  door  or  attach  the  lens  cap  to  prevent  the  lens  surface  being
scratched when the projector is not used.
• Do not touch the lens to prevent fog or dirt of the lens that...

7
Safety Precautions (continued)
NOTE
Avoid strong rays.
Any strong ray (such as direct rays of the sun or room lighting) onto the remote control
sensors could invalidate the remote control. 
Avoid radio interference.
Any interfering radiation could cause disordered image or noises.
• Avoid radio generator such as a mobile telephone, transceiver, etc. around the projector.
About displaying characteristic.
The  display  condition  of  the  projector  (such  as  color,  contrast,  etc.)  depends  on...

Lamp
8The  projector  uses  a  high-pressure  mercury  glass  lamp.  The  lamp  can break  with  a
loud  bang,  or  burn  out,if  jolted  or  scratched,  handled  while  hot,  or  worn  over  time.
Note that each lamp has a different lifetime, and some may burst or burn out soon after
you  start  using  them.  In  addition,  when  the  bulb  bursts,  it  is  possible  for shards  of
glassto fly into the lamp housing, and for gas containing mercuryto escape from the
projector’s vent holes.
About disposal...