Dukane Imagepro 8755a Liquid Crystal Projector Users Manual

9
TECHNICAL
NamesOperation typeHeaderCommand data
CRCActionTypeSetting code
Contrast
GetBE  EF0306  00FD  D302  0004  2000  00
IncrementBE  EF0306  009B  D304  0004  2000  00
DecrementBE  EF0306  004A  D205  0004  2000  00
Color Balance R
GetBE  EF0306  0001  D202  0005  2000  00
IncrementBE  EF0306  0067  D204  0005  2000  00
DecrementBE  EF0306  00B6  D305  0005  2000  00
Color Balance B
GetBE  EF0306  0045  D202  0006  2000  00
IncrementBE  EF0306  0023  D204  0006  2000  00
DecrementBE  EF0306  00F2...

10
Command data chart (continued)
NamesOperation typeHeaderCommand data
CRCActionTypeSetting code
Tint
GetBE  EF0306  0049  7302  0003  2200  00
IncrementBE  EF0306  002F  7304  0003  2200  00
DecrementBE  EF0306  00FE  7205  0003  2200  00
Video FormatSet
AutoBE  EF0306  009E  7501  0000  220A  00
NTSCBE  EF0306  00FE  7101  0000  2204  00
PALBE  EF0306  006E  7001  0000  2205  00
SECAMBE  EF0306  006E  7501  0000  2209  00
NTSC 4.43BE  EF0306  005E  7201  0000  2202  00
M-PALBE  EF0306  00FE  7401...

ENGLISH
1
LCD Projector 28A8755A
USERS MANUAL  
USERS MANUAL  Vol.2 (Extended)
Thank you for purchasing this projector.
• The information in this manual is subject to change without notice.\
• The manufacturer assumes no responsibility for any errors that may \
appear in this manual  
• The reproduction, transmission or use of this document or contents is no\
t permitted without express written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Bu\...

MAIN Menu
ItemDescription
BRIGHT Adjust Brightness:Light ñDark
CONTRASTAdjust Contrast:Strong ñWeak
ASPECT
Select Aspect Ratio:
At RGB Input:
4:3 ñ16:9
At VIDEO Input, S-VIDEO Input:4:3 ñ16:9 ñSMALL
• The SMALL picture may not be displayed correctly with certain input signals.
PICT.POSIT.Select Picture Position (for 16:9/SMALL Picture):
TOP ñCENTER ñBOTTOM
GAMMASelect Gamma Mode:
NORMAL ñCINEMA ñDYNAMIC
MIRRORSelect Mirror Status:
NORMAL ñH:INVERT ñV:INVERT ñH&V:INVERT
LANGUAGE
Select Menu...

ENGLISH
PICTURE 1 Menu
PICTURE 2 Menu
With the PICTURE 1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
With the PICTURE 2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
ItemDescription
COLOR BAL R Adjust Red Color Balance:Dark ñLight
COLOR BAL BAdjust Blue Color Balance:Dark ñLight
SHARPNESSAdjust Sharpness (for...

MULTIFUNCTIONAL SETTINGS (continued)
INPUT Menu
With the INPUT menu, the four items shown in the Table below can be
performed. With inputting of RGB IN 1 and RGB IN 2 signals, the
horizontal and vertical frequencies of the signals will be displayed on the
initial screen of the INPUT menu.
Perform each operation in accordance with the instructions in the Table.
4
ItemDescription
AUTO 
Auto Adjust (for RGB):Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the...

ENGLISH
SCREEN Menu
With the SCREEN menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
5 SCREEN Menu
ItemDescription
BLANK
Selection of BLANK Screen:MyScreen ñORIGINAL ñ.. ñ. . ñ..The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen
has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
“Temporarily Blanking the Screen” section of...

MULTIFUNCTIONAL SETTINGS (continued)
OPTION Menu
With the OPTION menu, the five items shown in the Table below
can be performed.
Please perform each operation in accordance with the instructions
in the Table.
MENU
: SELECT
MAIN
PICTURE-1
PICTURE-2
INPUT
SCREEN
OPTIONVOLUME
AUTO OFF
WHISPER
LAMP TIME
FILTER TIME
12
ItemDescription
VOLUMEAdjust Volume:High ñLow
AUTO OFF
Adjust AUTO OFF Time: 
Long (MAX. 99 min.) ñShort (Min. 1 min.) ñ(DISABLE: 0 min.)
The system automatically enters the standby mode if...

ENGLISH
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED 
Related Messages
When the units power is ON, messages such as those shown below may be displayed. When
any such message is displayed on the screen, please respond as described below.
7
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be
reappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of
usage, a...

Regarding the Indicator Lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER
indicatorLAMP
indicatorTEMP
indicatorDescription
The orange
lamp is lightedTurned OFF
(Not lighted)Turned OFF
(Not lighted)The STANDBY mode is set
Flashing of the green lampTurned OFFTurned OFFThe unit is warming up. Please wait.
The green lamp is lightedTurned...