Dukane Imagepro 8104wb, 8105b, 8106b Operating Guide

11
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser. 
For details of RS-232C commands, refer to RS-232C Communication / Network 
command table 
(&17).
Command Control via the Network
LAN
LAN LAN cable (CAT-5 or greater) 
NOTE • If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
1. Turn off the projector and...

12
Communicaion Port
The following two ports are assigned for the command control.TCP #23
TCP #9715
Configure the following items form a web browser when command control is used.
Port Settings
Network Control 
Port1 (Port: 23) Port open
Click the [Enable] check box to open [Network 
Control Port1 (Port: 23)] to use TCP #23.
Default setting is “Enable”.
Authentication Click the [Enable] check box for the 
[Authentication] setting when authentication 
is required.
Default setting is “Disable”.
Network...

13
Command Control via the Network (continued)
Command control settings
[TCP #23]
1. Command format
Same as RS-232C communication, refer to RS-232C Communicaton command format.
2. Response code / Error code ("h" shows hexadecimal)
Four of the response / error code used for TCP#23 are the same as RS-232C 
Communication (1)~(4). One authentication error reply (5) is added.
(1)    ACK reply : 06h 
Refer to RS-232C communication  (
&10).
(2)   NAK reply : 15h 
Refer to RS-232C communication  (
&10)....

14
2. Response code / Error code ("h" shows hexadecimal)
The  connection  ID  is  attached  for  the  TCP#23's  response  /  error  codes  are 
used. The connection ID is same as the sending command format.
(1) ACK reply : 06h + ××h                    (××h : connection ID)
(2) NAK reply : 15h + ××h
(3) Error reply : 1Ch + 0000h + ××h
(4) Data reply : 1Dh + xxxxh + ××h
(5) Authentication error reply : 1Fh + 0400h + ××h
(6)   Projector busy reply: 1Fh + ××××h + ××h 
When the projector is too...

15
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communicaton, an external 
device  that  is  connected  with  this  projector  by  RS-232C  communication  can  be 
controlled from the computer as a network terminal.
For details, see the 6. Network Bridge Function - Network Guide.
Network Bridge Communication 
Network Bridge  Communication
CONTROLRS-232C
LAN
LAN
Connection
1. If you use wired LAN, connect the computer's LAN port and the...

16
Communication settings 
For communication setting, use the OPTION - SERVICE - COMMUNICATION 
menu. (
&OPTION menu - SERVICE - COMMUNICATION in the User's Manual 
- Operating Guide )
Item Condition
BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (fixed) PARITY NONE/ODD/EVEN
Start bit 1 bit (fixed)
Stop bit 1 bit (fixed)
Transmission method HALF-DUPLEX/FULL-DUPLEX
NOTE  • For  connecting  the  projector  to  your  devices,  please  read  the 
manual for each devices, and connect...

17
RS-232C Communication / Network command table
Names Operation TypeHeaderCommand DataCRC Action Type
Setting code
Power
SetTurn off
BE  EF0306  00 2A  D3 01  0000  60 00  00
Turn on BE  EF0306  00 BA  D2 01  0000  60 01  00
Get BE  EF
0306  00 19  D3 02  0000  60 00  00
[Example return]
  00  00  01  00 02  00 
  [Off]  [On] [Cool down]
Input SourceSetCOMPUTER IN1 BE  EF
0306  00 FE  D2 01  00 00  20 00  00
COMPUTER IN2 BE  EF 0306  00 3E  D0 01  00 00  20 04  00
HDMI BE EF 0306 00 0E D2 01 00 00 20 03...

RS-232C Communication / Network command table (continued)
18(continued on next page)
Names Operation TypeHeaderCommand DataCRC Action Type
Setting code
CONTRAST 
ResetExecute BE  EF0306  00 A4  D2 06  00 01  70 00  00
GAMMASet1 DEFAULT BE  EF
0306  00 07  E9 01  00 A1  30 20  00
1 CUSTOM BE  EF 0306  00 07  FD 01  00 A1  30 10  00
2 DEFAULT BE  EF 0306  00 97  E8 01  00 A1  30 21  00
2 CUSTOM BE  EF 0306  00 97  FC 01  00 A1  30 11  00
3 DEFAULT BE  EF 0306  00 67  E8 01  00 A1  30 22  00
3 CUSTOM BE  EF...

RS-232C Communication / Network command table (continued)
19(continued on next page)
Names Operation TypeHeaderCommand DataCRC Action Type
Setting code
User Gamma 
Point 6 ResetExecute BE  EF0306  00 94  C2 06  0055  70 00  00
User Gamma 
Point 7Get BE  EF0306  00 80  FE 02  00 96  3000  00
Increment BE  EF 0306  00 E6  FE 04  0096  30 00  00
Decrement BE  EF 0306  00 37  FF 05  00 96  3000  00
User Gamma 
Point 7 ResetExecute BE  EF0306  00 D0  C2 06  00 56  70 00  00
User Gamma 
Point 8Get BE  EF0306...

RS-232C Communication / Network command table (continued)
20(continued on next page)
Names Operation TypeHeaderCommand DataCRC Action Type
Setting code
COLOR TEMP 
OFFSET G  ResetExecute BE  EF0306  00 BC  C4 06  00 4B  70 00  00
COLOR TEMP 
OFFSET BGet BE  EF0306  00 BC  F4 02  00B7  30 00  00
Increment BE  EF 0306  00 DA  F4 04  00B7  30 00  00
Decrement BE  EF 0306  00 0B  F5 05  00B7  30 00  00
COLOR TEMP 
OFFSET B  ResetExecute BE  EF0306  00 C8  C5 06  004C  70 00  00
COLOR
Get BE  EF0306  00 B5...