Dukane Imagepro 8100 Users Manual



ENGLISH
Projector
8100
User's Manual (concise)
Thank you for purchasing this product.
Please read the manuals for the product beforehand, in order to use the \
product safely 
and more effectively. To read the manuals in the CD, see the “ 6. Using the CD 
manual” (17).
Contents
. Checking the contents   ...................2
2. Arrangement  ..................................2
3. Connecting with your devices   ........4
4. Connecting with a power supply   ....5
5. Using the security...

2

(1)(2)
(3)(4)
(5)(6)(7)
1. Checking the contents
Check that all the following items are included. If any items are missin\
g, tell your dealer 
soon.
(1) Projector
(2) Remote control with two batteries
(3) Power cord
(4) Computer cable
(5) Cable cover with a screw
(6) User’s manuals (a booklet, a CD)
(7) Security label
   WARNING
■ Keep the original packing materials, and use for transporting this product.
2. Arrangement
Install the projector in a stable, cool, dry and airy place, keeping a s\
pace...

3
ENGLISH

AC2
C1
B2B1

A
C2
C1
B2B1

   WARNING
■ Install the projector only under the specified condition using only the specified 
accessory, since others may cause hazards.
■ Do not set the up projector while it is connected to a power supply, to prevent an 
electric shock and a fire.
   CAUTION
■ Do not block the vents on the projector. Do not place anything such as a piece of paper 
that can stick to the intake vents, around the projector.
Table for 4:3 screen
Table for 16:9 screen
NOTE
• It is...

4

MONITOR OUTCOMPUTER IN2COMPUTER IN1
CONTROL
LAN
AUDIOOUTS-VIDEOY         CB/PB CR/PRVIDEO        L           R
USB
AUDIO IN3
AUDIO IN
1
2
RGB OUTAUDIOOUTAUDIOOUTRS-232CUSB-A
         Y          CB/PB     CR/PRCOMPONENT VIDEO OUT L              R AUDO OUT L              R AUDO OUT L              R AUDO OUTS-VIDEO    OUTVIDEOOUT
RGB OUTLAN
AUDIO IN
RGB IN

3. Connecting with your devices
Before connecting them, make sure that the devices are suitable to connect with this 
projector, and prepare the...

5
ENGLISH

4. Connecting with a power supply
Before connection, confirm that the power outlet 
is suitable for this projector and the power cord.
Then follow the procedure below for connection.
AC Inlet
Power cord(with the socket)
   WARNING
■ Be careful of operation for a power supply not to cause an electric shock or a fire.
• Do not handle the power cord with the wet hand.
• Use this product with only the type of power supply indicated on th\
e projector.
• Use a power outlet that is close to the...

6

COMPUTER OUTCOMPUTER IN2COMPUTER IN1
CONTROL
LANAUDIOOUTS-VIDEOY         CB/PB    CR/PRVIDEO        L           RUSBAUDIO IN3AUDIO IN12

5. Using the security bar and slot
This projector has the security bar for a 
commercial anti-theft chain or wire up to 10 mm 
in diameter, and also the security slot for the 
Kensington lock.
For details, see the manual of the security tool.
Security slot
Security bar
NOTE
• These are not provided as comprehensive theft 
preventions but supplemental measures....

7
ENGLISH

7. Preparing for the remote control
The accessory remote control needs batteries. Use the batteries 
included in this product or two new batteries of the specified 
type: HITACHI MAXELL, part number LR6 or R6P. Follow 
the following procedure.
1.Remove the battery cover in the back of the remote 
control.
2.Put the batteries into the battery holder, according to the 
polarity markings (+) and (-) inside the holder.
3.Put the battery cover back to the former state.
Remote sensors
3 m(approx.)...

8

COMPUTER OUTCOMPUTER IN2COMPUTER IN1CONTROLLANAUDIOOUTS-VIDEOY         CB/PB    CR/PRVIDEO        L           RUSBAUDIO IN3AUDIO IN12
LAMPTEMPPOWERSTANDBY/ON
INPUT

8. Starting the projector
Turn on the projector and the connected devices. Turn on the projector ahead of other 
connected devices, unless mentioned in the manuals.
For this projector, follow the procedure below.
1.Press the side marked " I " of the power switch, 
as the power-on position.
The POWER indicator lights up in orange....

9
ENGLISH

COMPUTER OUTCOMPUTER IN2COMPUTER IN1C ONTROL
LANAUDIOOUTS-VIDEOY         CB/PB    CR/PRVIDEO         L           RUSBAUDIO IN 3AUDIO IN12

9. Adjusting the projection position
This projector has four elevator feet in the bottom. Use them to adjust \
the projection 
position.
Elevator feet
max. 43 mm
    CAUTION
  ■ Do not lengthen the elevator feet to 43 mm or more. The foot lengthened exceeding 
the limit may come off from the projector, and result in an injury. 
10. Operation
 Displaying...

0

0. Operation (continued)
Selecting an aspect ratio
Each time you press the ASPECT button 
on the remote control, it switches the 
aspect ratio of the image, in turn.
Muting the sound
Press the MUTE button on the remote control. To restore the sound, press the MUTE or 
VOLUME button.
NOTE
• For details, see the Operating Guide in the CD.
Adjusting the picture position
After pressing the POSITION button on 
the remote control, use the ▲, ▼, ◄ and 
► buttons. Press the POSITION button 
again...