Dukane Imagepro 8039 User Guide

LCD Projector




	
	



   

 1Table of Contents
Introduction...........................................................................2
How And Where To Get Help................................................3
How To Get Help...............................................................................3
Where To Get Help............................................................................4
Projector Features.................................................................5
Connecting the...

 2LCD Projector User Guide
Introduction
The easy-to-use LCD Digital Projector offer superb image quality at an
affordable price. Built into the LCD Digital Projector with Image Manager
feature. With this feature, you can select the image display setting best suited
for your specific presentation material and projection environment.
In only minutes you can have your LCD Digital Projector ready to go. Just
connect the projector to an image source such as a computer, DVD, VCR, or
digital camera.
If you are...

 3This section describes the most efficient and effective way for you to receive
technical support and customer service, should you need it.
How To Get Help
Before you call  Service Center, please refer to the Troubleshooting section of
this manual.
Seller provides technical support and customer service through a network of
authorized dealers.  Contact seller’s for the location of the nearest Authorized
dealer.
When you call seller, or an authorized service center, please be prepared to
provide the...

 4LCD Projector User Guide
Where To Get Help
Your authorized dealer
Note: Please record the contact information for the authorized dealer
from which you purchased your multimedia projector.
Company Name
Contact
Address
Telephone
Fax
Home Page
E-Mail
Hours of Operation 

 5Projector FeaturesProjector Features
connection panelkeypadremote control sensorfocus ring
zoom ring
( Zoom  model
only)adjustable feet
connection for optional Kensington Lock foot release button (2) 

 6LCD Projector User Guide
Connecting the Projector
The cables are color coded to assist you with making the connections.
When you connect the power cable to the projector, the Power light on the
keypad begins to blink.
You can connect more than one image source at a time. Use the Setup tab on
the menu screen to select which image source you want to view. See “Setting
Up the Image Source” on page 13.
If you are using an older MACINTOSH computer, you might need to use the
MACINTOSH adapter that was...

 7Starting the Presentation
We recommend turning on the projector and image sources in the order listed
here.
Note: You might not be using all of these components for your presentation.
  • Video source such as VCR, DVD or digital camera.
• Audio source if different from your video source or computer
• Projector
• Computer
1. Connect the signal cable to the computer or video source.
2. Connect the power cord to the projector and to a power source. The Power
light begins to blink.
3. Turn on the...

 8LCD Projector User Guide
4. Position the projector by using the adjustable feet on the bottom of  the
projector. Press the foot release buttons on the front of the projector to raise
or lower the feet.
5. Turn the focus ring to focus the image and turn the zoom ring (zoom model
only) to zoom in or out on the image.
6. Make any necessary image adjustments by using the on-screen menus.
Press the Menu button to view the menu choices. Use the Adjust + - buttons
to go to the desired tab. Press the Menu...

 9Using the Remote Control and Keypad
The remote control and projector keypad perform similar operations,
with one exception-the remote control has a volume control.Power - turns the projec-
tor on and off
Menu - display the menus
on the projected image
Enter - selects an option
button
Next - hightlights the next
feature in the menu
Adjust - navigates
between tabs; moves a
highlighted slider bar left
or right; and moves
between options forfeatures like Source and Projection
Volume - increase or decreases...